Pitch 7.92mm PCB Wire To Board Connectors Single Row 2 Pin Housing Lock For TV Set

Quick Detail

Package & Delivery Lead Time

Detailed Description

Pitch 7.92mm Pcb Connectors Wire To Board Single Row 2 Pin Housing Lock For TV Set 1. ProductInformations: Housing Material: Nylon 66, UL 94-V0, Housing color: White/Black/yellow Housing Pin NO.: 2Pin,single row ; P/N:A3961H-02P-2 Terminal Material: Brass,(P/N:A3961-TBE);Phosphor Bronze(P/N:A3961-TPE), Terminal E-stamping before Tin-plated. Terminal Wire Range: AWG#18--#22, Insulation O.D.: 3.0mm(max). Qty/Reel:4000pcs. 2. Specifications: Current Rating: 7A AC,DC Voltage Rating: 250V AC, DC Tenperature Range: -25C--+85C Contact Resistance:5M Max Insulation Resistance: 1000M Min Withstanding Voltage: 1500V AC/minute 3. Mechanical Performance - - - - Test Description | Procedure | Requirement | 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw actuator at the speed rate of 253mm / minute. | Refer to paragraph 7 | 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 253mm / minute.(Based upon JIS C5402 6.8) | AWG#16 | 10.2 kgf (Min.) | AWG#18 | 8.16 kgf (Min.) | AWG#20 | 6.12 kgf (Min.) | AWG#22 | 4.08 kgf (Min.) | 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50 kgf (Max.) | 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 253mm / minute on the terminal assembled in the housing. | 3.00 kgf (Min.) | 5-5 | Pin Retention Force | Apply axial pull out force at the speed rate of 253mm / minute. | 3.00 kgf (Min.) | 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 20m (Max.) | 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 20m (Max.) Discontinuity 1 sec.(Max.) | 5-8 | Physical Shock | 490m/s50G,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) | - - - - 4. Environmental Performance And Others - - - - Test Description | Procedure | Requirement | 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30(Max.) | 6-2 | Heat Resistance | 852,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) | Appearance No Damage. Contact Resistance 20m (Max.) | 6-3 | Cold Resistance | -253,96 hours (Based upon JIS C0020) | 6-4 | Humidity | Temperature: 402 Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) | Appearance No Damage. Contact Resistance 20m (Max.) Insulation Resistance 500M (Min.) Dielectric Withstanding Voltage Must meet 4-3 | 6-5 | Temperature Cycling | 5 cycles of: a) -55 30 minutes b) +85 30 minutes (Based upon JIS C0025) | Appearance No Damage. Contact Resistance 20m (Max.) | 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B) | 6-7 | SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. | 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | - - - - - - - - 6-9 | Solder-ability | Soldering Time: 50.5 sec. Solder Temperature: 2455 | Solder Wetting 95% of immersed area must show no voids, pin holes | 6-10 | Resistance to Soldering Heat | Solder pot method Soldering time: 100.5 sec. Solder Temperature: 2605 Solder iron method Soldering Time: 50.5 sec. Solder Temperature: 370 ~ 400 | Appearance No Damage. | - - - - 5. Actuator Insertion/Withdrawal Force [Unit : kgf] - - - - Circuits | At Initial | Insertion (Max.) | Withdrawal (Min.) | Single | 2.5 | 0.20 | 02 | 5.0 | 0.40 | - - - - 6. Drawing:

Basic Company Information

Dongguan Xinpei Plastic Metal Electronic Limited

Company Advantage

Detail Company Introduction