High Frequency 100 Watt Soldering Iron Static Free With Eddy Current Heating

Quick Detail

Package & Delivery Lead Time

Detailed Description

High Frequency Eddy Current Heating 100Watt Soldering Iron SolderingIronCharacter: 1. Designed for HF Soldering station RT-S0100. 2. Surprising speed up from room temperature to 350 not more than 20 seconds. 3. Intellectualized soldering with big power, and changes over spot size, again big of solder joint can complete well, can be effectively avoid the connection not fastness which caused by the cold soldering, etc. 4. Heat auto recovery ability, amazing speed of temperature compensation to solve the contradiction in the lead-free soldering process of temperature, . 5. An essential tool for some specific soldering at low temperature. Main Specification: - - - - Power | 100W | Output voltage | AC36V,380KHZ | Temperature range | 50~600 C (depending on the mode setting) | Maximum ambient temperature | 42 C | Temperature stability | 2 C (in still air, no load) | Housing Material | Aluminum Alloy | Size | 110*105*155mm | Net weight | 2.5KG | - - - - Materials List: - - - - Part Name | Specification | Description | nut | M11 | stainless steel | tip sheath | 8.5*43mm | stainless steel | soldering tip | 4*16.5mm | copper plus coating | hedging | M15*22mm | high temp materials | heater | HT-150 | silver wire wound | sensor | 2*85mm | K-type thermocouple | board | 10*50mm | fiberglass board | vibration switch | SW-18010P | temperature 100C | hook spring | 0.8*86mm | stainless steel | handle | 20*110mm | ABS material | handle sheath | 22*40mm | Silica gel | wire sheath | 10*40mm | rubber | assembled wire | 1.2m | anti-scald silicone line | air plugs | GX16-6 | metal | - - - - Soldering Iron Troubleshooting Pull the plug, measure the resistance value between the feet and legs of the connector plug : If " a " or " b ", the resistance value of the following table are different, need to replace the heating core, a sensor or ass'y of wires. Follow items 1 and 2 If the resistance value of the " c " is greater than the resistance value of the following table, will have to check whether the connection is loose or oxidation of 3 foot cable with fever core shell after the connection or removing the oxide layer. - - - - a. | between 4 feet and 5 feet (heater) | 1 (normal) | b. | between 1 foot and 2 feet (sensor) | 10 (normal) | c. | between 3 feet and iron tip | 2 (normal) | - - - - Application Fields High Frequency Soldering irons canused for installation, repairs, and limited production work in electronics assembly. Large tips seriescanbe used for soldering joints in sheet metal objects, also for the special field, likepyrography, JewelryandPlastic as well.

Basic Company Information

YMK Intelligent ME Company

Company Advantage

Detail Company Introduction