Metal High Frequency Soldering Iron Nut Copper Coating Tip 100 Watt

Quick Detail

Package & Delivery Lead Time

Detailed Description

Stainless Steel Nut Copper Coating Tip100 Watt High Frequency Soldering Iron Soldering IronFeature: 1. High precision/ high accuracy single chip microcomputer temperature control circuit, control the temperature is more precision / accurate. 2. stainless steel Electromagnetic heater, K-type thermocouple transducer / thermocoupleSensor, heat up fast and no need 20 seconds to heat up to 350. 3. The inside use terminal security connection mode and separating/ disconnect-type powercord. 4. Electrical equipment safety meet with the international standard. 5. Multilayers oxidation resistance and anti-corrosion round & sharp soldering tips. Heating principle The principle of high frequency eddy current heating (induction heating principle), High frequency Lead free soldering station is heat up at soldering tip itself, and no heat conduction, reduce thermal losses, heat up fastly and temperature returning quickly. When the heater on to 380 KHZ high frequency alternating current (ac), the heating cord coil Alternating magnetic field is produced and the top of tip in front of heating cord will have the field lines through, Due to the change of the magnetic field strength, In a soldering iron head will produce the ring closure of the induced current, this induced current name eddy, Because the electric current has thermal effect, So the tip got hot and Temperatures soared. SolderingIronCharacter: 1. Designed for HF Soldering station RT-S0100. 2. Surprising speed up from room temperature to 350 not more than 20 seconds. 3. Intellectualized soldering with big power, and changes over spot size, again big of solder joint can complete well, can be effectively avoid the connection not fastness which caused by the cold soldering, etc. 4. Heat auto recovery ability, amazing speed of temperature compensation to solve the contradiction in the lead-free soldering process of temperature, . 5.An essential tool for some specific soldering at low temperature. Main Points: - - - - Power | 100W | Output voltage | AC36V,380KHZ | Temperature range | 50~600 C (depending on the mode setting) | Maximum ambient temperature | 42 C | Temperature stability | 2 C (in still air, no load) | Housing Material | Aluminum Alloy | Size | 110*105*155mm | Net weight | 2.5KG | - - - - Materials List: - - - - Part Name | Specification | Description | nut | M11 | stainless steel | tip sheath | 8.5*43mm | stainless steel | soldering tip | 4*16.5mm | copper plus coating | hedging | M15*22mm | high temp materials | heater | HT-150 | silver wire wound | sensor | 2*85mm | K-type thermocouple | board | 10*50mm | fiberglass board | vibration switch | SW-18010P | temperature 100C | hook spring | 0.8*86mm | stainless steel | handle | 20*110mm | ABS material | handle sheath | 22*40mm | Silica gel | wire sheath | 10*40mm | rubber | assembled wire | 1.2m | anti-scald silicone line | air plugs | GX16-6 | metal | - - - -

Basic Company Information

YMK Intelligent ME Company

Company Advantage

Detail Company Introduction