Quick Detail
Place of Origin
Brand Name
Xitong
Model Number
QLB-Y
HS-CODE
85-
Package & Delivery Lead Time
Package
Nude Packing
Delivery Lead Time
negotiation /3 month after received your payment
Detailed Description
High integration and compact design 80T full mobile asphalt plant
Cold aggregate feeding system and Drying system
From the sand hopper by belt feeder and fromthe stone hoppers by either electric vibrating
feeders or belt feeders, material is fed onto acontinuous belt conveyor and delivered to the
dust plant/dryer via an inclined belt conveyor.The belt conveyor delivers material to the
Dryer feed ring, which moves the materialonto a series of lifters. As the Dryer cylinder
rotates, the material is cascaded through hotgases produced by the oil burner and travels
along the length of the cytinder to the discharge and Pusher plates allow side discharge ofmaterial into a discharge chute, which feedsinto the boot of the hot stone elevator. The
multi-cyclone, single stage dust collectingplant mounted on the rear of the chassis
collects the dust and is delivered to the Dryerdischarge chute by means of two screw
conveyors. The hot stone elevator takes thematerial from the first stage Dust collector.
- - - -
Item | Name | Specification | Qty. |
# # Mobile Aggregate Supply System | 1.1 Cold Aggregate Hoppers | Composition: cold aggregate hopper + belt feeder + collecting belt conveyor 1 set Mode: semi-trailer integrated assembly + frequency control feeder 1.1.1 Hopper: 4 units, charging height 4.4m, the compartment net installed at feed inlet can prevent large-size aggregate from entering the hopper Single feed inlet: length width = 3.52.35m Single hopper capability: 8.5m3 (flat hopper) 11.5m3 (full hopper) 1.1.2 Belt feeder: 4 units Mode: AC frequency control Belt width: 600mm Productivity: sand: 130t/h Aggregate:129t/h (20mmaggregate diameter40mm) Power: 2.2kW Accuracy: 1.5% 1.1.3 Hopper wall vibrator: 2 units Power: 0.25kW | 4 |
1.2 Collecting Belt Conveyor | Belt width: 650mm Productivity: 120t/h Motor power: 5.5kW | 1 |
# # Mobile Drying System | 2.1 Feeding Belt Conveyor | Belt width: 650mm Productivity: 200t/h Motor power: 4kW | 1 |
2.2 Drying Drum | Size: 1.840m (diameter) 8.1m (length) Installation inclined angle:4 Drum revolving speed: 8r/min Drive mode: four drive wheel attrition drive Drive motor: 7.5kW4 units Drum material: steel plate 20g Drum heat preservation: 50mm mineral wool covered with stainless steel | |
2.3 Oil-Burner | Oil-burning: High pressureAtomizing Brand: Freda (air consumption: 2m3/min; air pressure 0.6-0.7MPa) Composition: air blower, fuel pump, console, screw compressor: 15kW*1 set Automatic oil-burning: available fordiesel, heavy oil and residual oil | 1 |
2.4 Fuel Tank | Diesel tank: 10tons 1 unit | 2 |
- - - -
0 likes
China [CN] 
Click enlarge Image