Black / Red PP Garden Tools Plastic Wheel , Injection Moulded Plastic Parts

Quick Detail

Package & Delivery Lead Time

Detailed Description

1. ProductDescription: Name:Injection Plastic Wheel for Garden Tools with Black/Red PP, Sell to USA and Europe Material:PPAV161 Hotmarket:US,Europe Color:Anycolor,likeblack, red,silveretc.,evenpainting Size:Anysize,canbecustomized Finish:Smoothoranyotherfinishes Customlogo:engravingonmoldorsilkprintingonpart Sample:freesamplesavailable 2. MaterialSpecifications: MaterialGrade:PPAV161 Origin:SaudiArabia TypicalProperties 3. Injection Molding Injection molding is the most commonly used manufacturing process for the fabrication of plastic parts. A wide variety of products are manufactured using injection molding, which vary greatly in their size, complexity, and application. The injection molding process requires the use of an injection molding machine, raw plastic material, and a mold. The plastic is melted in the injection molding machine and then injected into the mold, where it cools and solidifies into the final part. The steps in this process are described in greater detail in the next section. 4. Possible Defects For Injection Parts - - - - Defect | Causes | Flash | # Injection pressure too high # Clamp forcetoo low | Warping | # Non-uniform cooling rate | Bubbles | # Injection temperature too high # Too much moisture in material # Non-uniform cooling rate | Unfilled sections | # Insufficientshotvolume # Flow rate of material too low | Sink marks | # Injection pressure too low # Non-uniform cooling rate | Ejector marks | # Cooling time too short # Ejection force too high | - - - -

Basic Company Information

Changzhou Wujin Shengyue Mould Plastic limited Co., Ltd

Company Advantage

Detail Company Introduction