Quick Detail
Place of Origin
HS-CODE
85-
Package & Delivery Lead Time
Detailed Description
UPS-JHP500WD/1000WD
CONTENTS OF LCD DISPLAY
Battery capacity
Power of loads
A.C power on line
Battery consumption
Exceed load
CONTENTS OF LCD DISPLAY
CPU controlling
LCD display
Auto. Distinguish of frequency
Speedy synchronic switch
Full stabilization of voltage and frequenc
Soft start
Auto. shut off with low battery
Testing on online battery
Noise elimination
Error open/close protection
High controlling precision and stability
With RS230 software and RJ11 Tel. Socket
UPS-JHP500D/M
INPUT VOLTAGE RANGE:145-285
INPUT FREQUENCY:50/60HZ±2.5%
OUTPUT VOLTAGE RANGE:220VAC±5%
OUTPUT FREQUENCY:50/60HZ±1%
OUTPUT TRANSFER TIME:4MS
BATTERY TYPE:SEALED ,MAINTENANCE-FREE LEAD ACID
BATTERY CAPACITY:12V 7AH×1
BATTERY BACKUP TIME:OVER 8 MINUTES IF USE FOR ONE PC WITH A 17″MONITOR
Battery recharge time:8 hours to 90% of full capacity
COMMUNICATION INTERFACE:RUPS2000:OPTION:RS232.RJ145/11 PORT
Protection:output overload protection
Output short circuit protection
Battery over discharge protection
Thunder protection IEEE-587A
Audible alarm:power-off:beeping sound every 4 seconds
Voltage-lack:beeping sound every 1 seconds
Failure or battery use up:continuous beeping
Environment:temperature:-5℃-40℃
Humidity:10%RH-90%RH
Noise:less than 40dB
SIZE:85*330*150
WEIGHT:7KG
DISPLAY:THE LCD PANEL DISPLAY,INPUT/OUTPUT VOLTAGE,BATTERY VOLTAGE,FREQUENCY ,LOAD WORKING STATUS ETC.
UPS-JHP650D/650M
INPUT VOLTAGE RANGE:145VAC-285VAC
INPUT FREQUENCY:50/60HZ+-2.5%
OUTPUT VOLTAGE RANGE:220VAC+-5%
OUTPUT FREQUENCY:50/60HZ+-1%
OUTPUT WAVEFORM:SIMULATED SINE WAVEFORM
TRANSFER TIME:4ms
BATTERY TYPE:SEALED ,MAINTENANCE-FREE LEAD ACID
BATTERY CAPACITY:12V 7AH*2
BATTERY BACKUP TIME:OVER 8 MINUTES IF USE FOR ONE PC WITH a17″MONITOR
RECHARGE TIME:8 HOURS TO 90% OF FULL CAPACITY
COMMUNICATION INTERFACE:RS 232,RJ45/11 PORT
PROTECTION:OUTPUT OVERLOAD, OUTPUT SHORT CIRCUIT,BATTERY OVER DISCHARGE,THUNDER PROTECTION IEEE-587A
AUDIBLE ALARM:POWER-OFF:BEEPING SOUND EVERY 4 SECONDS
VOLTAGE-LACK:BEEPING SOUND EVERY 1 SECOND
FAILURE OR BATTERY USE UP:CONTINUOUS BEEPING
ENVIRONMENT:TEMPERATURE:-5℃-40℃
HUMIDITY:10%RH-90%RH
NOISE:less than 45dB
SIZE:150*420*250
WEIGHT:7.0KG
DISPLAY:THE LCD PANEL DISPLAY, MANUFACTURER, INPUT/OUTPUT VOLTAGE,BATTERY VOLTAGE,FREQUENCY,LOAD WORKING STATUS ETC.
UPS-JHP1000D/1000M
INPUT VOLTAGE RANGE:145-285
INPUT FREQUENCY:50/60HZ±2.5%
OUTPUT VOLTAGE RANGE:220VAC±5%
OUTPUT FREQUENCY:50/60HZ±1%
OUTPUT TRANSFER TIME:4MS
BATTERY TYPE:SEALED ,MAINTENANCE-FREE LEAD ACID
BATTERY CAPACITY:12V 7AH×2
BATTERY BACKUP TIME:OVER 8 MINUTES IF USE FOR TWO PC with A 17″MONITOR
Battery recharge time:8 hours to 90% of full capacity
COMMUNICATION INTERFACE:RUPS2000:OPTION:RS232.RJ145/11 PORT
Protection:output overload protection
Output short circuit protection
Battery over discharge protection
Thunder protection IEEE-587A
Audible alarm:power-off:beeping sound every 4 seconds
Voltage-lack:beeping sound every 1 seconds
Failure or battery use up:continuous beeping
Environment:temperature:-5℃-40℃
Humidity:10%RH-90%RH
Noise:less than 40dB
SIZE:130×370×190
WEIGHT:13KG
DISPLAY:THE LCD PANEL DISPLAY,INPUT/OUTPUT VOLTAGE,BATTERY VOLTAGE,FREQUENCY ,LOAD WORKING STATUS ETC.
UPS-JHP1200D/1200M
INPUT VOLTAGE RANGE:145-285
INPUT FREQUENCY:50/60HZ±2.5%
OUTPUT VOLTAGE RANGE:220VAC±5%
OUTPUT FREQUENCY:50/60HZ±1%
OUTPUT TRANSFER TIME:4MS
BATTERY TYPE:SEALED ,MAINTENANCE-FREE LEAD ACID
BATTERY CAPACITY:12V 7AH×2
BATTERY BACKUP TIME:OVER 8 MINUTES IF USE FOR TWO PC with A 17″MONITOR
Battery recharge time:8 hours to 90% of full capacity
COMMUNICATION INTERFACE:RUPS2000:OPTION:RS232.RJ145/11 PORT
Protection:output overload protection
Output short circuit protection
Battery over discharge protection
Thunder protection IEEE-587A
Audible alarm:power-off:beeping sound every 4 seconds
Voltage-lack:beeping sound every 1 seconds
Failure or battery use up:continuous beeping
Environment:temperature:-5℃-40℃
Humidity:10%RH-90%RH
Noise:less than 40dB
SIZE:130×370×190
WEIGHT:13KG
DISPLAY:THE LCD PANEL DISPLAY,INPUT/OUTPUT VOLTAGE,BATTERY VOLTAGE,FREQUENCY ,LOAD WORKING STATUS ETC.
UPS-JH-D/M SERIES
INDICATOR
Green: Power indicator
(city power or battery mode )
Red: Warning indicator(low battery voltage, output overload, short circuit, malfunction and so on)
1. AC220V Input
2. Insurance
3. AC220V Output
4.
UPS-NT-500W/1000W
MARKED CHARACTERISTIC
The series UPS are designed for microcomputers, providing a high stable uninterruptible power supply . Please read the notes carefully ,correct use is helpful to avoid damage and harm to people.
The series UPS are made by advanced power technology ,have fine and delicate looks,high reliability and efficiency. Designed by interactive methods,auto.voltage and frequency ,preventing noise, overload and short protection,over discharge protection are provided ,and auto.power on/off, battery volume indicater,load indicater,printer outler with preventing thunder high load capability are delicately designed .By these ,you can achieve no-man on duty work and know about UPS status in time,assuring your computer have a safe power supply.
MARKED CHARACTERISTIC
High efficiency ,small size, novel design ,advanced character, high reliability
Stability of Acpower ,don’t need voltage stabilizer externally.On the backplate one bypass output socket is designed .Additional printer is convenient to use
Wide output ,it can output normally when AC power is between 160-270V
Enable to connect power supply by generator.Good load compatibility of load printer ,computer and fax machine etc.
Iron casing is playing role of electric magnetic masking than plastic casing .
It won’t disturb computer and equipments surrounding .
UPS-NT-500W
BATTERY MODEL:12V 7AH1
BACKUP TIME:18 MIN./PC
CHARGE TIME:8 HOURS TO 99%
TRANSFER TIMe:less than 10ms
TEMPERATURE:0-40℃
HUMIDITY:20%-90%(NO-CONDENSING)
DIMENSION:280×85×140(MM)
MET WEIGHT:6.0KGS
GROSS WEIGHT:6.5KGS
NT- 1000W
BATTERY MODEL:12V 7AH1×2
BACKUP TIME:15 MIN./2PC
CHARGE TIME:8 HOURS TO 99%
TRANSFER TIME:less than 10ms
TEMPERATURE:0-40℃
HUMIDITY:20%-90%(NO-CONDENSING)
DIMENSION:362×122×190(MM)
MET WEIGHT:11KGS
GROSS WEIGHT:11.8KGS
BACKUP TYPE JHP500(H)/1000(H)LONG DELAY SERIES
JHP-500
INPUT VOLTAGE:160-270V
INPUT FREQUENCY:50HZ±15%
INVERT OUTPUT VOLTAGE:220±10%
INVERT OUTPUT FREQUENCY:50HZ±1%
INVERT OUTPUT WAVEFORM:STAGE SQUARE WAVE
TRANSFER TIME:LESS THAN 10ms
STANDBY TIME :STANDARD MACHINE MORE THAN 15min
EFFICIENCY:MORE THAN 90%
WORKING ENVIRONMENT:TEMPERATURE:0-40℃
HUMIDITY :10%-90%
SECURITY:ACCORD GB4943
DISTURB HIGH-POINT:ACCORD GB9254
NET WEIGHT:5-6KG
SIZE(MM):STANDARD MACHINE:395×95×160
LONG-EFFICIENCY MACHINE:395×125×225
JHP-1000
INPUT VOLTAGE:160-270V
INPUT FREQUENCY:50HZ±15%
INVERT OUTPUT VOLTAGE:220±10%
INVERT OUTPUT FREQUENCY:50HZ±1%
INVERT OUTPUT WAVEFORM:STAGE SQUARE WAVE
TRANSFER TIME:LESS THAN 10ms
STANDBY TIME :STANDARD MACHINEMORE THAN 15min
EFFICIENCY:MORE THAN 90%
WORKING ENVIRONMENT:TEMPERATURE:0-40℃
HUMIDITY :10%-90%
SECURITY:ACCORD GB4943
DISTURB HIGH-POINT:ACCORD GB9254
NET WEIGHT:8KG
SIZE(MM):395×125×225
JHP-1300
INPUT VOLTAGE: 165-270V
INPUT FREQUENCY:50HZ±1%
INVERT OUTPUT VOLTAGE:220±10%
INVERT OUTPUT FREQUCNCY:50HZ±1%
WAVEFORM:STAGE SQUARE WAVE
TRANSFER TIME:LESS THAN 10ms
STAMDBY TIME:LESS THAN 30min
EFFICIENCY:MORE THAN90%
ENVIRONMENT:TEMPERATURE:0-40℃
HUMIDITY:10%-90%
SECURITY:ACCORD GB4943
DISTURBANCE HIGH-POINT:ACCORD GB9254
UPS-500VA/650VA
INPUT VOLTAGE: 165-270V
INPUT FREQUENCY:50HZ±1%
INVERT OUTPUT VOLTAGE:220±10%
INVERT OUTPUT FREQUCNCY:50HZ±1%
WAVEFORM:STAGE SQUARE WAVE
TRANSFER TIME:less than 10ms
STAMDBY TIME:more than 14min
EFFICIENCY: 90%
ENVIRONMENT:TEMPERATURE:0-40℃
HUMIDITY:10%-90%
SECURITY:ACCORD GB4943
DISTURBANCE HIGH-POINT:ACCORD GB9254
JHP-1200D
INPUT VOLTAGE RANGE:145VAC-285VAC
INPUT FREQUENCY:50/60HZ+-2.5%
OUTPUT VOLTAGE RANGE:220VAC+-5%
OUTPUT FREQUENCY:50/60HZ+-1%
OUTPUT WAVEFORM:SIMULATED SINE WAVEFORM
TRANSFER TIME:4ms
BATTERY TYPE:SEALED ,MAINTENANCE-FREE LEAD ACID
BATTERY CAPACITY:12V 7AH*2
BATTERY BACKUP TIME:OVER 8 MINUTES IF USE FOR TWO PC WITH A 17 NINUTES MONITOR
RECHARGE TIME:8 HOURS TO 90% OF FULL CAPACITY
COMMUNICATION INTERFACE:RS 232,RJ45/11 PORT
PROTECTION:OUTPUT OVERLOAD, OUTPUT SHORT CIRCUIT,BATTERY OVER DISCHARGE,THUNDER PROTECTION IEEE-587A
AUDIBLE ALARM:POWER-OFF:BEEPING SOUND EVERY 4 SECONDS
VOLTAGE-LACK:BEEPING SOUND EVERY 1 SECOND
FAILURE OR BATTERY USE UP:CONTINUOUS BEEPING
ENVIRONMENT:TEMPERATURE:-5℃-40℃
HUMIDITY:10%-90%
NOISE:less than 45dB
SIZE:200*460*290
WEIGHT:13KG
DISPLAY:THE LCD PANEL DISPLAY, MANUFACTURER, INPUT/OUTPUT VOLTAGE,BATTERY VOLTAGE,FREQUENCY,LOAD WORKING STATUS ETC.
UPS-JHS700
MARKED CHARACTERISTIC
JHS700 series UPS is single ,full sapience ,high frequency ,real on-line one, its capacity is from 1KVA to 3KVA ,which adopts CPU perfect control ,with test,full protection function ,and 50KVA high-frequency technical ,with small size ,light weight ,high efficiency working,zero cutover time, wide input of city power factor close to above 98%,pure-sine-wave output ,high steady of output voltage ,with adcanced RS232 interface supervise software(UPSilon2000), so the user can know operation of UPS directly through net and protect commercial server and PC server, periphery equipment ,communication and net equipments domestic computer and other precision electronic equipments, so it is the most ideal net intelligence UPS.
UPS-JHS700-1K
RATED CAPACITY:700W
INPUT VOLTAGE:160-276VAC
INPUT FREQUENCY:46-55HZ
OUTPUT VOLTAGE:220VAC±3%
ouTPUT FREQUENCY:50HZ±0.5%
OUTPUT WAVEFORM:SINE WAVE
SPARE TIME:7′/15′
STANDARD VOLTAGE OF BATTERY CONNECTED OUTSIDE:36VDC
TRANSFER TIME:BREAK OFF FOR ZERO
INDICATOR:LOAD INDICATOR,BATTERY INDICATOR, UPS OPERATION INDICATOR
ALARM:THE ALARM WILL SOUND EVERY 4 SECONDS WHEN BATTERY SUPPLY POWER,AND THE ALARM WILL SOUND EVERY 1 SECOND WHEN BATTERY USED UP, UPS ABNORMAL, CONTINUOUS ALARM
OVER LOAD CAPACITY:THE OUTPUT WILL BE CHANGED INTO BYPASS AFTER KEEPING 10 SECONDS FOR 110%-130%
COMMUNICATION INTERFACE:RS232+INTELLIGENT SLOT
OPERATION ENVIRONMENT:
TEMPERATURE:0-40℃
HUMIDITY:20%-90%
OUTER SIZE(W×L×H)MM:145×405×220
WEIGHT(NET WEIGHT)KG:8.5
UPS-JHS700-2K
RATED CAPACITY:700W
INPUT VOLTAGE:160-276VAC
INPUT FREQUENCY:46-55HZ
OUTPUT VOLTAGE:220VAC±3%
ouTPUT FREQUENCY:50HZ±0.5%
OUTPUT WAVEFORM:SINE WAVE
SPARE TIME:12′/30′
STANDARD VOLTAGE OF BATTERY CONNECTED OUTSIDE:96VDC
TRANSFER TIME:BREAK OFF FOR ZERO
INDICATOR:LOAD INDICATOR,BATTERY INDICATOR, UPS OPERATION INDICATOR
ALARM:THE ALARM WILL SOUND EVERY 4 SECONDS WHEN BATTERY SUPPLY POWER,AND THE ALARM WILL SOUND EVERY 1 SECOND WHEN BATTERY USED UP, UPS ABNORMAL, CONTINUOUS ALARM
OVER LOAD CAPACITY:THE OUTPUT WILL BE CHANGED INTO BYPASS AFTER KEEPING 10 SECONDS FOR 110%-130%
COMMUNICATION INTERFACE:RS232+INTELLIGENT SLOT
OPERATION ENVIRONMENT:
TEMPERATURE:0-40℃
HUMIDITY:20%-90%
OUTER SIZE(W×L×H)MM:195×455×350
WEIGHT(NET WEIGHT)KG:21
UPS-JHS700-3K
RATED CAPACITY:700W
INPUT VOLTAGE:160-276VAC
INPUT FREQUENCY:46-55HZ
OUTPUT VOLTAGE:220VAC±3%
ouTPUT FREQUENCY:50HZ±0.5%
OUTPUT WAVEFORM:SINE WAVE
SPARE TIME:7′/20′
STANDARD VOLTAGE OF BATTERY CONNECTED OUTSIDE:96VDC
TRANSFER TIME:BREAK OFF FOR ZERO
INDICATOR:LOAD INDICATOR,BATTERY INDICATOR, UPS OPERATION INDICATOR
ALARM:THE ALARM WILL SOUND EVERY 4 SECONDS WHEN BATTERY SUPPLY POWER,AND THE ALARM WILL SOUND EVERY 1 SECOND WHEN BATTERY USED UP, UPS ABNORMAL, CONTINUOUS ALARM
OVER LOAD CAPACITY:THE OUTPUT WILL BE CHANGED INTO BYPASS AFTER KEEPING 10 SECONDS FOR 110%-130%
COMMUNICATION INTERFACE:RS232+INTELLIGENT SLOT
OPERATION ENVIRONMENT:
TEMPERATURE:0-40℃
HUMIDITY:20%-90%
OUTER SIZE(W×L×H)MM:195×455×350
WEIGHT(NET WEIGHT)KG:22
UPS-JHS700-6K
RATED CAPACITY:700W
INPUT VOLTAGE:170-276VAC
INPUT FREQUENCY:46.5-55HZ
OUTPUT VOLTAGE:220VAC±3%
ouTPUT FREQUENCY:50HZ±0.5%
OUTPUT WAVEFORM:SINE WAVE
SPARE TIME:8′/25′
STANDARD VOLTAGE OF BATTERY CONNECTED OUTSIDE:240VDC
TRANSFER TIME:BREAK OFF FOR ZERO
INDICATOR:LOAD INDICATOR,BATTERY INDICATOR, UPS OPERATION INDICATOR
ALARM:THE ALARM WILL SOUND EVERY 4 SECONDS WHEN BATTERY SUPPLY POWER,AND THE ALARM WILL SOUND EVERY 1 SECOND WHEN BATTERY USED UP, UPS ABNORMAL, CONTINUOUS ALARM
OVER LOAD CAPACITY:THE OUTPUT WILL BE CHANGED INTO BYPASS AFTER KEEPING 10 SECONDS FOR 105%-130%
COMMUNICATION INTERFACE:RS232+INTELLIGENT SLOT
OPERATION ENVIRONMENT:
TEMPERATURE:0-40℃
HUMIDITY:20%-90%
OUTER SIZE(W×L×H)MM:260×555×170
WEIGHT(NET WEIGHT)KG:89
UPS-JHS700-10K
RATED CAPACITY:7000W
INPUT VOLTAGE:170-276VAC
INPUT FREQUENCY:46.5-55HZ
OUTPUT VOLTAGE:220VAC±3%
ouTPUT FREQUENCY:50HZ±0.5%
OUTPUT WAVEFORM:SINE WAVE
SPARE TIME:12′/30′
STANDARD VOLTAGE OF BATTERY CONNECTED OUTSIDE:240VDC
TRANSFER TIME:BREAK OFF FOR ZERO
INDICATOR:LOAD INDICATOR,BATTERY INDICATOR, UPS OPERATION INDICATOR
ALARM:THE ALARM WILL SOUND EVERY 4 SECONDS WHEN BATTERY SUPPLY POWER,AND THE ALARM WILL SOUND EVERY 1 SECOND WHEN BATTERY USED UP, UPS ABNORMAL, CONTINUOUS ALARM
OVER LOAD CAPACITY:THE OUTPUT WILL BE CHANGED INTO BYPASS AFTER KEEPING 10 SECONDS FOR 110%-130%
COMMUNICATION INTERFACE:RS232+INTELLIGENT SLOT
OPERATION ENVIRONMENT:
TEMPERATURE:0-40℃
HUMIDITY:20%-90%
OUTER SIZE(W×L×H)MM:340×640×980
WEIGHT(NET WEIGHT)KG:180
JHR RACK MOUNT ON LINE UPS
Our JHR rack mount series UPS is pure on line one, its capacity is from 1KVA to 6KVA.Compared to on line interactive series or back up type UPS ,the on line UPS can supply the load the best environment of power supply ,such as output range of voltage regulation,frequency range,filter to input noise, and zero transferred time between frequency mode and battery mode.JHR rack mount series UPS is the best construction ,so this UPS is specially designed for main equipment such as communication system and computer network system,and supply more and more flexible and reliable power supply protection to the equipment under strict power supply environment.
FEATURE
Pure sine wave output
Zero transferred time
Input zero and live wire sense function
Bypass output settable
TVSS function
(TEL,MODEM.NETWORK etc.Transferred protection)
Input power amendment
DC start
Bypass protection
Auto. restart function
Long-efficiency & strong charging capacity
Self-test function
Strong anti-jamming
Can tie-in generator
Free load down website
Equipped with Intelligent Slot
Equipped with standard battery group
UPS-JHS800
MARKED CHARACTERISTIC
JHS800 series are completely online UPS power supply which are designed at MICRO requirement and ragard elaborate craft,excellent achievement and easy operating as our objects.Circuit inside adopts CUP controls and auto. monitoring administration, high frequency IGBT mould inverter of high effrciency ,low distortion,and lowest noise.Isolation design output transformer internally can guarantee completely isolating between output and input .And they also have good load start function more better than high-frequency machine .JHS series are developed on basis of traditional online UPS by elaborate design, maintain advantage of traditional online UPS and have improved protection circuit,IGBT balance drive ,high-frequency charge etc.LCD is more designed ,software monitor etc. to rapidly improve feature of machine ,they are more usual suitable for office automatism,personal computers,post, science research,medical equipment ,bank,local network and otherfields.
MAJOR FUNCTIONS OF JHS800 SOFTWARE
Monitoring input and output status
Monitoring lower battery
Open/close regular(no person) controlling by modem
Broadcasting and record abnormal power situations
UPS works record
Various of UPS status are showed by pictures
LCD DISPLAY
Input situation of power ,battery situation
Input value of voltage of power
Output value of UPS
Input frequency
Output frequency
Supply by battery
Situation of output power
CONTROLLING PLATE
Controlling plate shows clearly of UPS situation ,loads,power of battery which are detected by CPU .We can catch power quality of UPS and variation of ambience surrounding at any time.
UPS-JHS800-1K
CAPACITY:0.8KW
INPUT VOLTAGE:1 PHASE 220VAC±25% 3 phase:380VAC±25%
INPUT FREQUENCY:50 OR 60HZ±5%
output voltage:220VAC±5% ADJUSTIBLE
OUTPUT FREQUENCY:50HZ±0.5% FREE RUNNING
VOLTAGE REGULATION:±1%
transfer response:±4% 100% load
waveform : sine wave is less than 3% 0-100% LINEAR LOAD
OVERLOAD CAPACITY:120-150% FOR 30s,more than 150% AUTO.LEAP TO BYPASS
POWER FACTOR:0.8-1,LAG
CREST RATIO:3:1
BATTERY TYPE:SEALED LEAD-ACID ,FREE MAINTENANCE
VDC:48VDC
CHARGER:1-10A ADJUSTABLE
EFFICIENCY:more than 85%
TRANSFER TIME:ZERO
PROTECTION:OVER CURRENT INPUT:AUTO.BREAK,OVER HEAT:bypass
EMI FILTER:10-100KHZ 40dB 100KHZ-100MHZ 70dB
AUDIO ALARM WHEN NO POWER SUPPLY:ALARM EVERY 4S AND LAST 90S
AUDIO ALARM WHEN BATTERY UNDER VOLTAGE:ALARM ONCE EVERY ONE SECOND
OVERLOAD:CONTINUOUSLY BUZZER
FAULT:CONTINUOUSLY BUZZER
LED DISPLAY:AC FAULT/BYPASS/INVERTER/BATTERY /BATTERY LOWER/OVERLOAD
LCD DISPLAY:INPUT/OUTPUT/BATTERY VOLTAGE INPUT/OUTPUT FREQUENCY/LOADS/UPS STATUS
INTERFACE:AC FAULT,LOWER BATTERY,BYPASS OPEN INVERTER,INTELLIGENT SOFRWARE OF DISTANCE CLOSE.
SIZE(MM):210×490×500
WEIGHT(KG):35
TEMPERATURE:0-40℃
HUMIDITY:20-90% NON-COAGULATION
AUDIO NOISE:LESS THAN 58dB AT ONE METER
UPS-JHS800-2K
CAPACITY:1.6KW
INPUT VOLTAGE:1 PHASE 220VAC±25% 3 phase:380VAC±25%
INPUT FREQUENCY:50 OR 60HZ±5%
output voltage:220VAC±5% ADJUSTIBLE
OUTPUT FREQUENCY:50HZ±0.5% FREE RUNNING
VOLTAGE REGULATION:±1%
transfer response:±4% 100% load
waveform : sine wave is less than 3% 0-100% LINEAR LOAD
OVERLOAD CAPACITY:120-150% FOR 30s.more than 150% AUTO.LEAP TO BYPASS
POWER FACTOR:0.8-1,LAG
CREST RATIO:3:1
BATTERY TYPE:SEALED LEAD-ACID ,FREE MAINTENANCE
VDC:48VDC
CHARGER:1-10A ADJUSTABLE
EFFICIENCY:more than 85%
TRANSFER TIME:ZERO
PROTECTION:OVER CURRENT INPUT:AUTO.BREAK,OVER HEAT:bypass
EMI FILTER:10-100KHZ 40dB 100KHZ-100MHZ 70dB
AUDIO ALARM WHEN NO POWER SUPPLY:ALARM EVERY 4S AND LAST 90S
AUDIO ALARM WHEN BATTERY UNDER VOLTAGE:ALARM ONCE EVERY ONE SECOND
OVERLOAD:CONTINUOUSLY BUZZER
FAULT:CONTINUOUSLY BUZZER
LED DISPLAY:AC FAULT/BYPASS/INVERTER/BATTERY /BATTERY LOWER/OVERLOAD
LCD DISPLAY:INPUT/OUTPUT/BATTERY VOLTAGE INPUT/OUTPUT FREQUENCY/LOADS/UPS STATUS
INTERFACE:AC FAULT,LOWER BATTERY,BYPASS OPEN INVERTER,INTELLIGENT SOFRWARE OF DISTANCE CLOSE.
SIZE(MM):210×560×530
WEIGHT(KG):57
TEMPERATURE:0-40℃
HUMIDITY:20-90% NON-COAGULATION
AUDIO NOISE:less than 58dB AT ONE METER
UPS-JHS800-3K
CAPACITY:2.4KW
INPUT VOLTAGE:1 PHASE 220VAC±25% 3 phase:380VAC±25%
INPUT FREQUENCY:50 OR 60HZ±5%
output voltage:220VAC±5% ADJUSTIBLE
OUTPUT FREQUENCY:50HZ±0.5% FREE RUNNING
VOLTAGE REGULATION:±1%
transfer response:±4% 100% load
waveform : sine wave less than 3% 0-100% LINEAR LOAD
OVERLOAD CAPACITY:120-150% FOR 30s,more than 150% AUTO.LEAP TO BYPASS
POWER FACTOR:0.8-1,LAG
CREST RATIO:3:1
BATTERY TYPE:SEALED LEAD-ACID ,FREE MAINTENANCE
VDC:48VDC
CHARGER:1-10A ADJUSTABLE
EFFICIENCY:more than 85%
TRANSFER TIME:ZERO
PROTECTION:OVER CURRENT INPUT:AUTO.BREAK,OVER HEAT:bypass
EMI FILTER:10-100KHZ 40dB 100KHZ-100MHZ 70dB
AUDIO ALARM WHEN NO POWER SUPPLY:ALARM EVERY 4S AND LAST 90S
AUDIO ALARM WHEN BATTERY UNDER VOLTAGE:ALARM ONCE EVERY ONE SECOND
OVERLOAD:CONTINUOUSLY BUZZER
FAULT:CONTINUOUSLY BUZZER
LED DISPLAY:AC FAULT/BYPASS/INVERTER/BATTERY /BATTERY LOWER/OVERLOAD
LCD DISPLAY:INPUT/OUTPUT/BATTERY VOLTAGE INPUT/OUTPUT FREQUENCY/LOADS/UPS STATUS
INTERFACE:AC FAULT,LOWER BATTERY,BYPASS OPEN INVERTER,INTELLIGENT SOFRWARE OF DISTANCE CLOSE.
SIZE(MM):210×560×530
WEIGHT(KG):60
TEMPERATURE:0-40℃
HUMIDITY:20-90% NON-COAGULATION
AUDIO NOISE:less than 58dB AT ONE METER
UPS-800-JHS4K
CAPACITY:3.2KW
INPUT VOLTAGE:1 PHASE 220VAC±25% 3 phase:380VAC±25%
INPUT FREQUENCY:50 OR 60HZ±5%
output voltage:220VAC±5% ADJUSTIBLE
OUTPUT FREQUENCY:50HZ±0.5% FREE RUNNING
VOLTAGE REGULATION:±1%
transfer response:±4% 100% load
waveform : sine wave is less than 3% 0-100% LINEAR LOAD
OVERLOAD CAPACITY:120-150% FOR 30s,more than 150% AUTO.LEAP TO BYPASS
POWER FACTOR:0.8-1,LAG
CREST RATIO:3:1
BATTERY TYPE:SEALED LEAD-ACID ,FREE MAINTENANCE
VDC:48VDC
CHARGER:1-10A ADJUSTABLE
EFFICIENCY:more than 85%
TRANSFER TIME:ZERO
PROTECTION:OVER CURRENT INPUT:AUTO.BREAK,OVER HEAT:bypass
EMI FILTER:10-100KHZ 40dB 100KHZ-100MHZ 70dB
AUDIO ALARM WHEN NO POWER SUPPLY:ALARM EVERY 4S AND LAST 90S
AUDIO ALARM WHEN BATTERY UNDER VOLTAGE:ALARM ONCE EVERY ONE SECOND
OVERLOAD:CONTINUOUSLY BUZZER
FAULT:CONTINUOUSLY BUZZER
LED DISPLAY:AC FAULT/BYPASS/INVERTER/BATTERY /BATTERY LOWER/OVERLOAD
LCD DISPLAY:INPUT/OUTPUT/BATTERY VOLTAGE INPUT/OUTPUT FREQUENCY/LOADS/UPS STATUS
INTERFACE:AC FAULT,LOWER BATTERY,BYPASS OPEN INVERTER,INTELLIGENT SOFRWARE OF DISTANCE CLOSE.
SIZE(MM):270×680×580
WEIGHT(KG):68
TEMPERATURE:0-40℃
HUMIDITY:20-90% NON-COAGULATION
AUDIO NOISE:LESS THAN 58dB AT ONE METER
UPS-800-JHS6K
CAPACITY:4.8KW
INPUT VOLTAGE:1 PHASE 220VAC±25% 3 phase:380VAC±25%
INPUT FREQUENCY:50 OR 60HZ±5%
output voltage:220VAC±5% ADJUSTIBLE
OUTPUT FREQUENCY:50HZ±0.5% FREE RUNNING
VOLTAGE REGULATION:±1%
transfer response:±4% 100% load
waveform : sine wave is less than 3% 0-100% LINEAR LOAD
OVERLOAD CAPACITY:120-150% FOR 30s,more than 150% AUTO.LEAP TO BYPASS
POWER FACTOR:0.8-1,LAG
CREST RATIO:3:1
BATTERY TYPE:SEALED LEAD-ACID ,FREE MAINTENANCE
VDC:48VDC
CHARGER:1-10A ADJUSTABLE
EFFICIENCY:more than 85%
TRANSFER TIME:ZERO
PROTECTION:OVER CURRENT INPUT:AUTO.BREAK,OVER HEAT:bypass
EMI FILTER:10-100KHZ 40dB 100KHZ-100MHZ 70dB
AUDIO ALARM WHEN NO POWER SUPPLY:ALARM EVERY 4S AND LAST 90S
AUDIO ALARM WHEN BATTERY UNDER VOLTAGE:ALARM ONCE EVERY ONE SECOND
OVERLOAD:CONTINUOUSLY BUZZER
FAULT:CONTINUOUSLY BUZZER
LED DISPLAY:AC FAULT/BYPASS/INVERTER/BATTERY /BATTERY LOWER/OVERLOAD
LCD DISPLAY:INPUT/OUTPUT/BATTERY VOLTAGE INPUT/OUTPUT FREQUENCY/LOADS/UPS STATUS
INTERFACE:AC FAULT,LOWER BATTERY,BYPASS OPEN INVERTER,INTELLIGENT SOFRWARE OF DISTANCE CLOSE.
SIZE(MM):480×840×340
WEIGHT(KG):70
TEMPERATURE:0-40℃
HUMIDITY:20-90% NON-COAGULATION
AUDIO NOISE:LESS THAN 58dB AT ONE METER
UPS-800-JHS8K
CAPACITY:6.4KWKW
INPUT VOLTAGE:1 PHASE 220VAC±25% 3 phase:380VAC±25%
INPUT FREQUENCY:50 OR 60HZ±5%
output voltage:220VAC±5% ADJUSTIBLE
OUTPUT FREQUENCY:50HZ±0.5% FREE RUNNING
VOLTAGE REGULATION:±1%
transfer response:±4% 100% load
waveform : sine wave is less than 3% 0-100% LINEAR LOAD
OVERLOAD CAPACITY:120-150% FOR 30s, more than 150% AUTO.LEAP TO BYPASS
POWER FACTOR:0.8-1,LAG
CREST RATIO:3:1
BATTERY TYPE:SEALED LEAD-ACID ,FREE MAINTENANCE
VDC:48VDC
CHARGER:1-10A ADJUSTABLE
EFFICIENCY:more than 85%
TRANSFER TIME:ZERO
PROTECTION:OVER CURRENT INPUT:AUTO.BREAK,OVER HEAT:bypass
EMI FILTER:10-100KHZ 40dB 100KHZ-100MHZ 70dB
AUDIO ALARM WHEN NO POWER SUPPLY:ALARM EVERY 4S AND LAST 90S
AUDIO ALARM WHEN BATTERY UNDER VOLTAGE:ALARM ONCE EVERY ONE SECOND
OVERLOAD:CONTINUOUSLY BUZZER
FAULT:CONTINUOUSLY BUZZER
LED DISPLAY:AC FAULT/BYPASS/INVERTER/BATTERY /BATTERY LOWER/OVERLOAD
LCD DISPLAY:INPUT/OUTPUT/BATTERY VOLTAGE INPUT/OUTPUT FREQUENCY/LOADS/UPS STATUS
INTERFACE:AC FAULT,LOWER BATTERY,BYPASS OPEN INVERTER,INTELLIGENT SOFRWARE OF DISTANCE CLOSE.
SIZE(MM):480×840×340
WEIGHT(KG):90
TEMPERATURE:0-40℃
HUMIDITY:20-90% NON-COAGULATION
AUDIO NOISE:LESS THAN 58dB AT ONE METER
UPS-800-JHS10
CAPACITY:8KW
INPUT VOLTAGE:1 PHASE 220VAC±25% 3 phase:380VAC±25%
INPUT FREQUENCY:50 OR 60HZ±5%
output voltage:220VAC±5% ADJUSTIBLE
OUTPUT FREQUENCY:50HZ±0.5% FREE RUNNING
VOLTAGE REGULATION:±1%
transfer response:±4% 100% load
waveform : sine wave is less than 3% 0-100% LINEAR LOAD
OVERLOAD CAPACITY:120-150% FOR 30s,more than 150% AUTO.LEAP TO BYPASS
POWER FACTOR:0.8-1,LAG
CREST RATIO:3:1
BATTERY TYPE:SEALED LEAD-ACID ,FREE MAINTENANCE
VDC:48VDC
CHARGER:1-10A ADJUSTABLE
EFFICIENCY:more than 85%
TRANSFER TIME:ZERO
PROTECTION:OVER CURRENT INPUT:AUTO.BREAK,OVER HEAT:bypass
EMI FILTER:10-100KHZ 40dB 100KHZ-100MHZ 70dB
AUDIO ALARM WHEN NO POWER SUPPLY:ALARM EVERY 4S AND LAST 90S
AUDIO ALARM WHEN BATTERY UNDER VOLTAGE:ALARM ONCE EVERY ONE SECOND
OVERLOAD:CONTINUOUSLY BUZZER
FAULT:CONTINUOUSLY BUZZER
LED DISPLAY:AC FAULT/BYPASS/INVERTER/BATTERY /BATTERY LOWER/OVERLOAD
LCD DISPLAY:INPUT/OUTPUT/BATTERY VOLTAGE INPUT/OUTPUT FREQUENCY/LOADS/UPS STATUS
INTERFACE:AC FAULT,LOWER BATTERY,BYPASS OPEN INVERTER,INTELLIGENT SOFRWARE OF DISTANCE CLOSE.
SIZE(MM):410×1100×750
WEIGHT(KG):110
TEMPERATURE:0-40℃
HUMIDITY:20-90% NON-COAGULATION
AUDIO NOISE:LESS THAN 58dB AT ONE METER
UPS-2000(3W3) SERIES
CHARACTERISTIC
Three-phase input ,single-phase or three-phase output
Electromagnetic compatibility
LCD panel data display
The increasing compatibility between the UPS and generator
Intelligence RS232 interface
Intelligence charging managements
With RUPS power motoring software
UPS-2000(3W1)-RT2015
CAPACITY:15KVA
INPUT VOLTAGE RANGE:380VAC
INPUT FREQUENCY RANGE:50/60HZ±5%
INPUT PHASE:THREE PHASES
OUTPUT VOLTAGE RANGE:220VAC
OUTPUT FREQUENCY RANGE:50/60HZ
OUTPUT VOLTAGE STABILIZED DEGREE:±1%
Output frequency stabilized degree:±5% when city power off
OUTPUT WAVEFORM:SINE WAVE
OUTPUT CAPACITY FACTOR:1-0.8
OUTPUT DISTORTION:less than 3 %(LIEAR LOAD)
INSTANT RESPONSE:MAX. VOLTAGE VARIES WITHIN 4%(100%)LOAD INPUT OR TRANSFER
BATTERY SYSTEM VOLTAGE:THREE/SINGLE TYPE:284VDC
BATTERY FORM:ACID SEALED FREE-MAINTENACE TYPE
BATTERY CHARGING TIME:FINISH 90% CAPACITY WITHIN 8-10 HOURS
EFFICIENCY:more than 90%
TRANSFER TIME WHEN CITY POWER OFF:ZERO TRANSFER
NET WEIGHT(KG):220
DIMENSION(MM)505×420×795
UPS-2000(3W1)-RT2020
CAPACITY:20KVA
INPUT VOLTAGE RANGE:380VAC
INPUT FREQUENCY RANGE:50/60HZ±5%
INPUT PHASE:THREE PHASES
OUTPUT VOLTAGE RANGE:220VAC
OUTPUT FREQUENCY RANGE:50/60HZ
OUTPUT VOLTAGE STABILIZED DEGREE:±1%
Output frequency stabilized degree:±5% when city power off
OUTPUT WAVEFORM:SINE WAVE
OUTPUT CAPACITY FACTOR:1-0.8
OUTPUT DISTORTION:less than 3 %(LIEAR LOAD)
INSTANT RESPONSE:MAX. VOLTAGE VARIES WITHIN 4%(100%)LOAD INPUT OR TRANSFER
BATTERY SYSTEM VOLTAGE:THREE/SINGLE TYPE:284VDC
BATTERY FORM:ACID SEALED FREE-MAINTENACE TYPE
BATTERY CHARGING TIME:FINISH 90% CAPACITY WITHIN 8-10 HOURS
EFFICIENCY:more than 90%
TRANSFER TIME WHEN CITY POWER OFF:ZERO TRANSFER
NET WEIGHT(KG):270
DIMENSION(MM)505×420×795
UPS-2000(3W1)-RT2030
CAPACITY:30KVA
INPUT VOLTAGE RANGE:380VAC
INPUT FREQUENCY RANGE:50/60HZ±5%
INPUT PHASE:THREE PHASES
OUTPUT VOLTAGE RANGE:220VAC
OUTPUT FREQUENCY RANGE:50/60HZ
OUTPUT VOLTAGE STABILIZED DEGREE:±1%
Output frequency stabilized degree:±5% when city power off
OUTPUT WAVEFORM:SINE WAVE
OUTPUT CAPACITY FACTOR:1-0.8
OUTPUT DISTORTION:less than 3 %(LIEAR LOAD)
INSTANT RESPONSE:MAX. VOLTAGE VARIES WITHIN 4%(100%)LOAD INPUT OR TRANSFER
BATTERY SYSTEM VOLTAGE:THREE/SINGLE TYPE:284VDC
BATTERY FORM:ACID SEALED FREE-MAINTENACE TYPE
BATTERY CHARGING TIME:FINISH 90% CAPACITY WITHIN 8-10 HOURS
EFFICIENCY:more than 90%
TRANSFER TIME WHEN CITY POWER OFF:ZERO TRANSFER
NET WEIGHT(KG):320
DIMENSION(MM)555×720×1200
UPS-2000(3W1)-RT2040
CAPACITY:40KVA
INPUT VOLTAGE RANGE:380VAC
INPUT FREQUENCY RANGE:50/60HZ±5%
INPUT PHASE:THREE PHASES
OUTPUT VOLTAGE RANGE:220VAC
OUTPUT FREQUENCY RANGE:50/60HZ
OUTPUT VOLTAGE STABILIZED DEGREE:±1%
Output frequency stabilized degree:±5% when city power off
OUTPUT WAVEFORM:SINE WAVE
OUTPUT CAPACITY FACTOR:1-0.8
OUTPUT DISTORTION:less than 3 %(LIEAR LOAD)
INSTANT RESPONSE:MAX. VOLTAGE VARIES WITHIN 4%(100%)LOAD INPUT OR TRANSFER
BATTERY SYSTEM VOLTAGE:THREE/SINGLE TYPE:284VDC
BATTERY FORM:ACID SEALED FREE-MAINTENACE TYPE
BATTERY CHARGING TIME:FINISH 90% CAPACITY WITHIN 8-10 HOURS
EFFICIENCY:more than 90%
TRANSFER TIME WHEN CITY POWER OFF:ZERO TRANSFER
NET WEIGHT(KG):380
DIMENSION(MM)555×720×1200
UPS-2000(3W3)SERIES
UPS-2000(3W3)SERIES FEATURE
Complete power protection from an on-line double conversion design incorporating an automaticstatic bypass for overload and fault conditions.
Low running costs with a high operating efficiency .UPS-2000(3W3)series uses IGBT (insulated gate bipolar transistor) technology in the inverter to achieve this high efficiency.
Wide input voltage range to minimize battery consumption and help extend battery life.
High level remote monitoring and control using both RS232 and volt free contact signals from two separate communications ports.
UPS-2000(3W3) series also includes an easy use front panel status display.
Full microprocessor managements which monitor and control all functions of the UPS including operation,battery management ,automatic rastart and shutdown,and provide real time mains and load readings.
High reliability and low maintenance.UPS-2000(3W3) series is built in manual maintenance bypass, and MTBF(mean time between failure) of 200000 hours ,an MTTR(mean time to repair) of 15minites, slide out batteery trays and redundant ventilation for better thermal stability.
UPS-2000(3W3) series estabilishes a new benchmark in uninterruptedly power. The modern ,compact design tackles power problems in a unique and innovative way to ptovide outstanding protection for computer networks,process and medical control equipment ,and any other mission critical applications.
UPS-2000(3W3) series is also “friendly” to the electrical supply ,taking in 95% active power.
The built-in LCD display and LED micro diagram provide clear and timely information on UPS operation status ,such as remote communications.
UPS-2000(3W3) series provides two RS232 interface ports,and a remote port including UPS-OFF,bypass and EPO inputs.
The software for most operating platforms and a complete range of SNMP operation(both for Ethernet and Token Ring) are available on request.
Power range: 10KVA-40KVA
Work mode : three-phase on-line
Application area: data process center, host computer system ,manufacture industry, telecom equipment etc.
Event record
Three phases input ,three phases output
Online double conversion
Static by pass
Manual maintenance by pass
Microprocessor control
LCD front panel diagnostics
Remote and tele-control
Redundant and parallel architecture
Expandable runtime capability
Auto diagnostics
Low audible noise level
UPS-2000(3W3)-RT2010
Output capacity:10KVA
Input voltage:380±20%(3φ+N)(at normal load)
Frequency range:45-65HZ
Power factor:0.95
Output voltage:380VA 3φ
Setting range:346-415VA(on the control panel )
Crest factor:3:1
Wave form:sinewave
Distortion with liner load:2.5%
Stability voltage at steady state:±1%
Stability voltage at transient state: ±4%
Frequency :50/60HZ the same of input
Frequency stability without synchronization: ±0.05%
Frequency stability with synchronization:frequency is same as bypass
Effective:92%
Overload:110%/125%./150% nominal voltage 300/10/1s
Battery type:sealed lead-acid maintenance free
VDC:192+192VDC/288+288VDC
Widening :diffenrent battery combinations
Bypass type:STATIC+manual per maintenance free
Voltage:380VAC±15%(±10%-±20%)3φ＋N(on the control panel)
Input frequency range:±2%(+1%~+5%)(on the control panel)
Overload capacity per 1 min:200%
Transfer time:AC fault:0ms
UPS fault:less than 2ms
System remote signal:3 tension f.e. contacts
Remote command:EPO and bypass
Computer interface:standard rs232×2
Operating temperature:0-40℃
Relative humidity:95% without condensation
Max operating altitude:1000m at rated power An(-1% An for each 100m) max 4000m
Cooling :force venational(fan speed fungating of load)
Noise level at 1 m. DbA:less than 56Db
Protection level:IP20
Applicable standards:safety EN50091-101,Electromagnetic compellability EMC EN 50091-2 liv.A
Option:insulation transforms-harmonic suppression filter-parallelism kit up to six units
Dimension(W×D×H):505×720×1135
Weight(UPS only):100kgs
UPS-2000(3W3)-RT2015
Output capacity:15KVA
Input voltage:380±20%(3φ+N)(at normal load)
Frequency range:45-65HZ
Power factor:0.95
Output voltage:380VA 3φ
Setting range:346-415VA(on the control panel )
Crest factor:3:1
Wave form:sinewave
Distortion with liner load:2.5%
Stability voltage at steady state:±1%
Stability voltage at transient state: ±4%
Frequency :50/60HZ the same of input
Frequency stability without synchronization: ±0.05%
Frequency stability with synchronization:frequency is same as bypass
Effective:92%
Overload:110%/125%./150% nominal voltage 300/10/1s
Battery type:sealed lead-acid maintenance free
VDC:192+192VDC/288+288VDC
Widening :diffenrent battery combinations
Bypass type:STATIC+manual per maintenance free
Voltage:380VAC±15%(±10%-±20%)3φ＋N(on the control panel)
Input frequency range:±2%(+1%~+5%)(on the control panel)
Overload capacity per 1 min:200%
Transfer time:AC fault:0ms
UPS fault:less than 2ms
System remote signal:3 tension f.e. contacts
Remote command:EPO and bypass
Computer interface:standard rs232×2
Operating temperature:0-40℃
Relative humidity:95% without condensation
Max operating altitude:1000m at rated power An(-1% An for each 100m) max 4000m
Cooling :force venational(fan speed fungating of load)
Noise level at 1 m. DbA:less than 56Db
Protection level:IP20
Applicable standards:safety EN50091-101,Electromagnetic compellability EMC EN 50091-2 liv.A
Option:insulation transforms-harmonic suppression filter-parallelism kit up to six units
Dimension(W×D×H):505×720×1135
Weight(UPS only):114kgs
UPS-2000(3W3)-RT2020
Output capacity:20KVA
Input voltage:380±20%(3φ+N)(at normal load)
Frequency range:45-65HZ
Power factor:0.95
Output voltage:380VA 3φ
Setting range:346-415VA(on the control panel )
Crest factor:3:1
Wave form:sinewave
Distortion with liner load:2.5%
Stability voltage at steady state:±1%
Stability voltage at transient state: ±4%
Frequency :50/60HZ the same of input
Frequency stability without synchronization: ±0.05%
Frequency stability with synchronization:frequency is same as bypass
Effective:92%
Overload:110%/125%./150% nominal voltage 300/10/1s
Battery type:sealed lead-acid maintenance free
VDC:192+192VDC/288+288VDC
Widening :diffenrent battery combinations
Bypass type:STATIC+manual per maintenance free
Voltage:380VAC±15%(±10%-±20%)3φ＋N(on the control panel)
Input frequency range:±2%(+1%~+5%)(on the control panel)
Overload capacity per 1 min:200%
Transfer time:AC fault:0ms
UPS fault:less than 2ms
System remote signal:3 tension f.e. contacts
Remote command:EPO and bypass
Computer interface:standard rs232×2
Operating temperature:0-40℃
Relative humidity:95% without condensation
Max operating altitude:1000m at rated power An(-1% An for each 100m) max 4000m
Cooling :force venational(fan speed fungating of load)
Noise level at 1 m. DbA:less than 56Db
Protection level:IP20
Applicable standards:safety EN50091-101,Electromagnetic compellability EMC EN 50091-2 liv.A
Option:insulation transforms-harmonic suppression filter-parallelism kit up to six units
Dimension(W×D×H):505×720×1135
Weight(UPS only):120kgs
UPS-2000(3W3)-RT2030
Output capacity:30KVA
Input voltage:380±20%(3φ+N)(at normal load)
Frequency range:45-65HZ
Power factor:0.95
Output voltage:380VA 3φ
Setting range:346-415VA(on the control panel )
Crest factor:3:1
Wave form:sinewave
Distortion with liner load:2.5%
Stability voltage at steady state:±1%
Stability voltage at transient state: ±4%
Frequency :50/60HZ the same of input
Frequency stability without synchronization: ±0.05%
Frequency stability with synchronization:frequency is same as bypass
Effective:92%
Overload:110%/125%./150% nominal voltage 300/10/1s
Battery type:sealed lead-acid maintenance free
VDC:192+192VDC/288+288VDC
Widening :diffenrent battery combinations
Bypass type:STATIC+manual per maintenance free
Voltage:380VAC±15%(±10%-±20%)3φ＋N(on the control panel)
Input frequency range:±2%(+1%~+5%)(on the control panel)
Overload capacity per 1 min:200%
Transfer time:AC fault:0ms
UPS fault:less than 2ms
System remote signal:3 tension f.e. contacts
Remote command:EPO and bypass
Computer interface:standard rs232×2
Operating temperature:0-40℃
Relative humidity:95% without condensation
Max operating altitude:1000m at rated power An(-1% An for each 100m) max 4000m
Cooling :force venational(fan speed fungating of load)
Noise level at 1 m. DbA:less than 56Db
Protection level:IP20
Applicable standards:safety EN50091-101,Electromagnetic compellability EMC EN 50091-2 liv.A
Option:insulation transforms-harmonic suppression filter-parallelism kit up to six units
Dimension(W×D×H):505×795×1210
Weight(UPS only):126kgs
UPS-2000(3W3)-RT2040
Output capacity:40KVA
Input voltage:380±20%(3φ+N)(at normal load)
Frequency range:45-65HZ
Power factor:0.95
Output voltage:380VA 3φ
Setting range:346-415VA(on the control panel )
Crest factor:3:1
Wave form:sinewave
Distortion with liner load:2.5%
Stability voltage at steady state:±1%
Stability voltage at transient state: ±4%
Frequency :50/60HZ the same of input
Frequency stability without synchronization: ±0.05%
Frequency stability with synchronization:frequency is same as bypass
Effective:92%
Overload:110%/125%./150% nominal voltage 300/10/1s
Battery type:sealed lead-acid maintenance free
VDC:192+192VDC/288+288VDC
Widening :diffenrent battery combinations
Bypass type:STATIC+manual per maintenance free
Voltage:380VAC±15%(±10%-±20%)3φ＋N(on the control panel)
Input frequency range:±2%(+1%~+5%)(on the control panel)
Overload capacity per 1 min:200%
Transfer time:AC fault:0ms
UPS fault:less than 2ms
System remote signal:3 tension f.e. contacts
Remote command:EPO and bypass
Computer interface:standard rs232×2
Operating temperature:0-40℃
Relative humidity:95% without condensation
Max operating altitude:1000m at rated power An(-1% An for each 100m) max 4000m
Cooling :force venational(fan speed fungating of load)
Noise level at 1 m. DbA:less than 56Db
Protection level:IP20
Applicable standards:safety EN50091-101,Electromagnetic compellability EMC EN 50091-2 liv.A
Option:insulation transforms-harmonic suppression filter-parallelism kit up to six units
Dimension(W×D×H):505×795×1210
Weight(UPS only):132kgs
0 likes
Click enlarge Image
