Tungsten carbide cold heading dies
0 likes
China [CN] Tungsten carbide cold heading dies
1/ GENERAL INTRODUCTION:
Tungsten carbide cold heading die for cold punching and heading of screws and nuts.
High impact resistance ,Toughness,wear resistance,and quality consistency. You are encouraged to use our professional carbide grades for cold heading &punching die nibs. Power metallurgical Compacting dies and other industries.For stable performance and high-cost-effectiveness.They have been proved to be ideal in making non-ferrous metal , ferrous metal and their alloys.
Zhuzhou UKO Cemented Carbide Co.,Ltd. could supply various grades and sizes cemented carbide heading die to customer, we have most complete mould stocks, also we could make any sizes as per customer's requirements.
All of our heading dies are sintered by HIP furnace, and we used the excellent raw material, our heading dies was exported to Germany, Italy, Turkey, South east Asia and Japan, the qty of our heading die production is over 20 MT per month, and the quality if very competive.
2/Grade speicifications of Tungsten carbide heading dies :
|
Grade |
Density |
T.R.S MPa |
Hardness HRA |
Performance & application recommended |
|
GT40 |
13.6 |
3300 |
87.2 |
Very high toughness & very good wear resistance. Very good performance on difficult heading and forming dies cold extrusion &heading dies for bolts, nuts and similar difficult cold headed parts. Press tools for sheet metal applications. Cut-off knifes & quils for wire dia less than 8mm, dies for difficult extrusions.
|
|
GT50 |
13.3 |
3200 |
85.0 |
Extra-ordinary high toughness & good wear resistance. Good strength at elevated temperature. ideally suited for tools which are subjected to impact loads, easily machinable. Very good performance on heading and forming dies, performing and finishing dies for cold forming of screws, rivet, bolt, nut and similar cold headed parts. Cold forming dies for cylindrical and taper roller for roller bearings. Cold forming dies for bearing balls. Dies for impact extrusion, quils& cutters for wire dia. More than 8mm. |
|
GT55 |
13.1 |
3100 |
84.3 |
3/Standard size of Tungsten carbide heading dies :
4/Production equipment of tungsten carbide heading die
5/Standard packing of tungsten carbide heading die
6/ CERTIFICATE OF ZHUZHOU UKO
7/ SERVICE OF ZHUZHOU UKO
1. feedback within 24 hours;
2. good english communication;
3. professional suggestion on product;
4. good traning export sales person;
5. skilled in tungsten carbide sell;
6. could issue the C/O(certificate of origin)to customer to reduce the tax;
7. could accept all payment terms of T/T(both in advanced and after shipment), D/P, D/A, L/C, western union, paypal and etc;
8. could offer free samples below 0.5kgs under the condition of freight paid by customer;
9.MOQ 5kgs for sintered blank;
ZHUZHOU UKO CEMTNED CARBIDE CO.,LTD.
Address: Xinhua West Road, Hetang district, Zhuzhou, Hunan, P.R.China
Postal code: 41200
Tel: +86-731-28339730
Fax: +86-731-28337210
Mobile: +86-15973362017
Website: www.ukocarbide.com
Click enlarge Image