PBM Materials: PP, PE, PET, HDPE, PVC, ABS etc. Plastic Bottle Manufacturers, Plastic Water Bottle
Plastic Spray Bottle, HDPE Bottle, Shampoo Bottle, Cosmetic Bottle, Juice Bottle, Sports Bottle,
Questions Editor(1) In the design plastic squeeze bottle, if made of high density polyethylene or polypropylene, a plastic bottle cross-section should be rectangular or elliptical, the material is low density polyethylene or other flexible plastic bottle with a cross circular cross-section as well. This facilitates content was extruded from a plastic bottle. Plastic bottle used in conjunction with the plastic parts mainly for caps and sealers. Plastic bottle shall be designed to focus on exam; consider how to make a plastic bottle to better seal the lid and the bottom of the mating plastic bottles, plastic bottles is the weakest part of the mechanical properties. Thus, the bottom of the plastic bottles are typically designed within the concave; corner of plastic bottles, and the pocket, were done over a larger arc. To facilitate stacking plastic bottles, plastic bottles increase the stacking stability, the bottom of the plastic bottle should be designed within the groove.(2) surface using plastic bottles stickers, labels should be flat surface. You can design a "grid" in a plastic bottle surface, so that accurate positioning of labels, no movement. During the blow molding, the parison blown first contact portions, always tends to harden the first site. Therefore, the wall thickness of this portion is also larger. Edge and corner location, the parison is blown last contact with the site, the thickness of the smaller parts. Therefore wiping edge and corner regions of plastic bottles should be designed to fillet. Changing the surface shape of the plastic bottles, plastic bottles such as Central relatively finer, increasing the circumferential surface of the plastic bottle to the groove or rib, the rigidity can be improved plastic bottle and bending resistance. Longitudinal grooves or ribs, plastic bottles can be eliminated under a long-term shift in load, sag or deformation phenomena.