GDJS-016B High & Low Temperature and Humidity Chamber with AC380V 3Phases and Frequency 50Hz/60Hz
0 likes
China [CN] It is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80, electricity products, electronic components, material and so on.Specification:
•The chamber is produced by SUS304 Steel, the temperature keeping material is produced by Polyurethane hard foam and ultra-fine fibre glass, the doorframe heat insulated by Double high temperature aging silicone rubber door sealing strip.•The temperature controller is used by Korean TEMI display in English/Chinese and German Siemens PLC, it can be communicated to PC via RS-232. The temperature accuracy is 0.1°C and humidity is 0.1%R.H•The temperature sensor is platinum PT100 Ohms/MV resistor•The heating system is full separately system which produced by Nickel chromium alloy electric heating type heater•The cold system is applied by fully enclosed fan cooled single-stage and cascade refrigeration mode, the compressor is from France TECUMSEH brand which can allow you get after sales support from many countries•The cyclical system is applied by High temperature low noise air conditioning type motor and Multi blade centrifugal wind wheel•The safety self-protection function include Electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection•Working Power: AC380V±10% 3phases/5wires and frequency is 50±0.5Hz•Working Environmental: Temperature is 5°C~+30°C Humidity ≤85%R.H
| High & Low Temperature and Humidity Chamber with Programmable Function (GDJS Series) | |||||
| Working Room Size | GDJS-225A | GDJS-500A | GDJS-010A | GDJS-013A | GDJS-015A |
| Workroom Dimensions (cm) | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Temperature Range | A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C | ||||
| Fluctuation/Evenness | ±0.5°C/±2°C | ||||
|
Humidity Range |
30%~98%RH | ||||
| Humidity Deviation | -2%~-3% | ||||
| Temperature Rise Speed | 1.0°C~3.0°C/min | ||||
| Temperature Down Speed | 0.7°C~1.0°C/min | ||||
| High and Low Temperature Chamber with Programmable Function (GDJW Series) | |||||
| Working Room Size | GDJW-225A | GDJW-500A | GDJW-010A | GDJW-013A | GDJW-015A |
| Workroom Dimensions (cm) | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Temperature Range | A: -20°C-150°C B: -40°C-150°C C: -60°C-150°C | ||||
| Fluctuation/Evenness | ±0.5°C/±2°C | ||||
| Temperature Rise Speed | 1.0°C~3.0°C/min | ||||
| Temperature Down Speed | 0.7°C~1.0°C/min | ||||
Lisun Electronics Inc was found by Lisun Group in 2003. We have sales & service offices in Hong Kong and Shanghai. The Lisun Group were award CE certificate. As a CIE Supportive Member, all of the test instruments of Lisun Group are designed according to CIE Standards. Lisun Group's products have been sold to more than 50 countries and regions in Europe, America, Australis, Africa,South America and Asia. Its quality is well accepted by many companies such as GE, Phillps, Sharp, OSRAM, SONY and so on.
Lisun Group Certifications:
Training for our Customers:
On the HKTDC Hong Kong Lighting Fair:
IES file test Service:
we will test two lamps for you for free and supply you the following two kinds of test report.
1. LM-79 IES or LDT files report for distribution curve intensity test by Goniophotometer System
2. LM-79 report for lumen, CCT, CRI, Spectrum test by Integrating Sphere & Spectroradiometer System LPCE-2(LMS-9000)
Click enlarge Image