casappa hydraulic pump hydraulic pumps for sale

hydraulic pump manufacturers_hydraulic pump parts_hydraulic pumps and motors suppliers in china

 

China hydraulic pump manufacturers, hydraulic pumps and motors, hydraulic pump parts, piston pump parts, hydraulic pump,  hydraulic spare parts, hydraulic piston pump, hydraulic vane pump, hydraulic gear pump, Hydraulic Motor,Pilot Pump, Charge Pump for Rexroth,Caterpillar,Vickers,Denison,Sauer,Kawasaki,Commercial,Linde,Parker,Liebherr,Komatsu,Eaton,Daikin,Kubota,Johndeer,Hitachi. T6C,T6D,T6E,45VQ,35VQ,25VQ,20VQ,V10,V20,Hydraulic Motor.

 

Our website: www.pepfluid.com      

 

China Industry Research Reports released "2011--2015 China's auto high pressure pump (fuel pump) market operators and investment trend forecast report" a total of ten chapters. Initially introduced fuel pump industry-related overview of the global automotive high-pressure pump operating conditions, and then analyzes the status quo of Chinese auto high pressure fuel pump, and then introduced the high-pressure pumps Chinese automobile market competition. Subsequently, the report of the high-pressure pumps Chinese automobile made a key business conditions analysis, the final analysis of the Chinese automobile industry development prospects of high-pressure pumps and investment forecasts. If you wish to understand the automobile industry has a high pressure pump system or want to invest in high-pressure pumps automotive industry, the report is an indispensable tool for you.The present study reports data mainly uses national statistics, the Customs Department, the survey data, the Commerce Department to collect data and other databases. Wherein the main macroeconomic data from the National Bureau of Statistics, part of the industry, mainly from the National Bureau of Statistics data and market research data, business data mainly from the State Bureau of Statistics Database-scale enterprises and the stock exchange, the price data mainly from the various markets monitoring database.Hydraulic pump to provide pressurized hydraulic transmission fluid to a hydraulic element is a pump, then we have to look at when the electric pump using four notes, hoping to be helpful to everyone.1, when used as runaway phenomenon occurs, you can relax on the oil drain screw pump, the pump vertically up and head down a few dozen empty, then tighten the oil drain screw, you can continue to use.2, when used, must not add partial load or overload, to prevent the risk of damage to the jack. When there is a load, should not remove the quick connector, to prevent accidents and damage to the parts.3, new or long set of hydraulic jacks, since there are more air cylinders memory, when started, the rod may appear tiny breakaway phenomenon, can the hydraulic jack load reciprocating motion 2-3 times to exclude cavity air. long idle jack, do not work long-term because the seals caused by hardening of the seal, thus affecting the life of hydraulic jacks, hydraulic jack when not in use so a month to load hydraulic jack 2-3 times reciprocation.4, after the high-pressure pipe factory 105Mpa test. However, due to the hose easy to aging, so the user must always check, usually for six months, frequently with those of three months. 87.5Mpa pressure test with inspection and, if blasting, bump leakage and other phenomena can not be used.In what ways can use to find the cause pump failureFor hydraulic pumps and other related equipment have application users may understand, after a period of time we can not avoid it will be some failures, large and small, and therefore have an impact on our work, found the problem to be solved problem, we were able to find the reason for this from the following three points:1. Check hydraulic boom cylinder internal leakage situation. The easiest way is to raise the boom to see if it is not obvious free fall. If the fuel tank drops significantly demolition inspection, such as worn seals should be given replacement.2. Check the operating valve. First clean the safety valve, check valve body is not worn, such as wear and tear should be replaced. If there is still no change after the valve is installed, and then check the case of control valve spool wear, the gap is generally limits the use of 0.06mm, badly worn should be replaced.3, the measurement of the pressure of the hydraulic pump. If the pressure is low, then make adjustments, plus the pressure is still not tune up, then pump heavy wear.Above that these, I hope we can gain, you want to know more about the knowledge of the hydraulic pump can often focus our company's News!Structure This section describes various types of axial piston pump??????Axial Piston Pump