Hot sale vrla agm battery 12v 12ah
0 likes
China [CN] General features:
1)Extremely safe and stable chemistry
2)Non-spillable construction design
3)ABS containers and covers optional
4)safty valve installation of explosion proof
5)high quality and high realiability
6)exceptional deep discharge recovery performance
7)low shelf discharge characteristics
8)flexible design for multiple installation positions
Applications:
♦Telephone switchboards, electric equipments, medical equipments, medical instruments and meters
♦Computers and uninterrupted power source (UPS)
♦ower transmission and transformer station, switch control and accident lighting
♦ Fire fighting, safety device and alarm monitoring
♦Aviation, spaceflight and power storage
♦Automatic office system
♦ Radio communication
♦ Emrgency lighting and car and ship starting system
♦Portable electric appliances and mining system
♦Traffic and navigation signal lamp
Warnings:
1)- Matrix series accumulator have acid in the case and are fully charged beforeleaving factory. Do not attempt to dismantle the accumulator, if accidental skin/eyecontact is made with electrolyte, seek medical advice immediately. 2)- Do not use a new battery with an old one. 3)- Do not use the battery in sealed container. 4)- Each battery should have detailed record including the ex-factory date,installing date and using record. 5)- Check the connection of wire in a fixed interval (once a year). If there isany looseness should tighten the wire. 6)- Wipe the surface of the battery with soft cloth in a fixed interval (oncethree months) and always keep the accumulator clean. 7)- Avoid using any kind of organic solvents for cleaning the surface of theaccumulator.
| Nominal Voltage | 12V | |
| Rated capacity(20 hour rate) | 12AH | |
| Dimensions | Length | 151±1mm(5.94 inches) |
| Width | 98±1mm(3.86inches) | |
| Height | 96±1mm(3.74inches) | |
| Total Height | 101±1mm(3.98 inches) | |
| Weight Approx | 3.40Kg(7.50lbs) | |
| Capacity 25°C(77°F) | 20 hour rate(0.60A, 10.50V) | 12.00AH | |
| 10 hour rate(1.10A, 10.50V) | 11.00AH | ||
| 5 hour rate(2.04A, 10.50V) | 10.20AH | ||
| 1 hour rate(7.20A, 9.60V) | 7.20AH | ||
| Internal Resistance | Full charged Batteryat 25 °C (77°F) | 16mΩ | |
| Capacity affected by temperature(20 hour rate) | 40°C(104°F) | 102% | |
| 25°C(77°F) | 100% | ||
| 0°C(32°F) | 85% | ||
| -15°C(5°F) | 65% | ||
| Self-Discharge at 25°C(77°F) | Capacity after 3 month storage | 91% | |
| Capacity after 6 month storage | 82% | ||
| Capacity after 12 month storage | 64% | ||
| Charge (constant voltage) | Cycle | Initial Charging Currentless than 3.60A Voltage14.40-15.00 V | |
| Float | Voltage 13.50-13.80V | ||
| Terminal | T2,T3 | ||
General features:
1)Extremely safe and stable chemistry
2)Non-spillable construction design
3)ABS containers and covers optional
4)safty valve installation of explosion proof
5)high quality and high realiability
6)exceptional deep discharge recovery performance
7)low shelf discharge characteristics
8)flexible design for multiple installation positions
Applications:
♦Telephone switchboards, electric equipments, medical equipments, medical instruments and meters
♦Computers and uninterrupted power source (UPS)
♦ower transmission and transformer station, switch control and accident lighting
♦ Fire fighting, safety device and alarm monitoring
♦Aviation, spaceflight and power storage
♦Automatic office system
♦ Radio communication
♦ Emrgency lighting and car and ship starting system
♦Portable electric appliances and mining system
♦Traffic and navigation signal lamp
Warnings:
1)- Matrix series accumulator have acid in the case and are fully charged beforeleaving factory. Do not attempt to dismantle the accumulator, if accidental skin/eyecontact is made with electrolyte, seek medical advice immediately. 2)- Do not use a new battery with an old one. 3)- Do not use the battery in sealed container. 4)- Each battery should have detailed record including the ex-factory date,installing date and using record. 5)- Check the connection of wire in a fixed interval (once a year). If there isany looseness should tighten the wire. 6)- Wipe the surface of the battery with soft cloth in a fixed interval (oncethree months) and always keep the accumulator clean. 7)- Avoid using any kind of organic solvents for cleaning the surface of theaccumulator.
| Nominal Voltage | 12V | |
| Rated capacity(20 hour rate) | 12AH | |
| Dimensions | Length | 151±1mm(5.94 inches) |
| Width | 98±1mm(3.86inches) | |
| Height | 96±1mm(3.74inches) | |
| Total Height | 101±1mm(3.98 inches) | |
| Weight Approx | 3.40Kg(7.50lbs) | |
| Capacity 25°C(77°F) | 20 hour rate(0.60A, 10.50V) | 12.00AH | |
| 10 hour rate(1.10A, 10.50V) | 11.00AH | ||
| 5 hour rate(2.04A, 10.50V) | 10.20AH | ||
| 1 hour rate(7.20A, 9.60V) | 7.20AH | ||
| Internal Resistance | Full charged Batteryat 25 °C (77°F) | 16mΩ | |
| Capacity affected by temperature(20 hour rate) | 40°C(104°F) | 102% | |
| 25°C(77°F) | 100% | ||
| 0°C(32°F) | 85% | ||
| -15°C(5°F) | 65% | ||
| Self-Discharge at 25°C(77°F) | Capacity after 3 month storage | 91% | |
| Capacity after 6 month storage | 82% | ||
| Capacity after 12 month storage | 64% | ||
| Charge (constant voltage) | Cycle | Initial Charging Currentless than 3.60A Voltage14.40-15.00 V | |
| Float | Voltage 13.50-13.80V | ||
| Terminal | T2,T3 | ||
General features:
1)Extremely safe and stable chemistry
2)Non-spillable construction design
3)ABS containers and covers optional
4)safty valve installation of explosion proof
5)high quality and high realiability
6)exceptional deep discharge recovery performance
7)low shelf discharge characteristics
8)flexible design for multiple installation positions
Applications:
♦Telephone switchboards, electric equipments, medical equipments, medical instruments and meters
♦Computers and uninterrupted power source (UPS)
♦ower transmission and transformer station, switch control and accident lighting
♦ Fire fighting, safety device and alarm monitoring
♦Aviation, spaceflight and power storage
♦Automatic office system
♦ Radio communication
♦ Emrgency lighting and car and ship starting system
♦Portable electric appliances and mining system
♦Traffic and navigation signal lamp
Warnings:
1)- Matrix series accumulator have acid in the case and are fully charged beforeleaving factory. Do not attempt to dismantle the accumulator, if accidental skin/eyecontact is made with electrolyte, seek medical advice immediately. 2)- Do not use a new battery with an old one. 3)- Do not use the battery in sealed container. 4)- Each battery should have detailed record including the ex-factory date,installing date and using record. 5)- Check the connection of wire in a fixed interval (once a year). If there isany looseness should tighten the wire. 6)- Wipe the surface of the battery with soft cloth in a fixed interval (oncethree months) and always keep the accumulator clean. 7)- Avoid using any kind of organic solvents for cleaning the surface of theaccumulator.
| Nominal Voltage | 12V | |
| Rated capacity(20 hour rate) | 12AH | |
| Dimensions | Length | 151±1mm(5.94 inches) |
| Width | 98±1mm(3.86inches) | |
| Height | 96±1mm(3.74inches) | |
| Total Height | 101±1mm(3.98 inches) | |
| Weight Approx | 3.40Kg(7.50lbs) | |
| Capacity 25°C(77°F) | 20 hour rate(0.60A, 10.50V) | 12.00AH | |
| 10 hour rate(1.10A, 10.50V) | 11.00AH | ||
| 5 hour rate(2.04A, 10.50V) | 10.20AH | ||
| 1 hour rate(7.20A, 9.60V) | 7.20AH | ||
| Internal Resistance | Full charged Batteryat 25 °C (77°F) | 16mΩ | |
| Capacity affected by temperature(20 hour rate) | 40°C(104°F) | 102% | |
| 25°C(77°F) | 100% | ||
| 0°C(32°F) | 85% | ||
| -15°C(5°F) | 65% | ||
| Self-Discharge at 25°C(77°F) | Capacity after 3 month storage | 91% | |
| Capacity after 6 month storage | 82% | ||
| Capacity after 12 month storage | 64% | ||
| Charge (constant voltage) | Cycle | Initial Charging Currentless than 3.60A Voltage14.40-15.00 V | |
| Float | Voltage 13.50-13.80V | ||
| Terminal | T2,T3 | ||
General features:
1)Extremely safe and stable chemistry
2)Non-spillable construction design
3)ABS containers and covers optional
4)safty valve installation of explosion proof
5)high quality and high realiability
6)exceptional deep discharge recovery performance
7)low shelf discharge characteristics
8)flexible design for multiple installation positions
Applications:
♦Telephone switchboards, electric equipments, medical equipments, medical instruments and meters
♦Computers and uninterrupted power source (UPS)
♦ower transmission and transformer station, switch control and accident lighting
♦ Fire fighting, safety device and alarm monitoring
♦Aviation, spaceflight and power storage
♦Automatic office system
♦ Radio communication
♦ Emrgency lighting and car and ship starting system
♦Portable electric appliances and mining system
♦Traffic and navigation signal lamp
Warnings:
1)- Matrix series accumulator have acid in the case and are fully charged beforeleaving factory. Do not attempt to dismantle the accumulator, if accidental skin/eyecontact is made with electrolyte, seek medical advice immediately. 2)- Do not use a new battery with an old one. 3)- Do not use the battery in sealed container. 4)- Each battery should have detailed record including the ex-factory date,installing date and using record. 5)- Check the connection of wire in a fixed interval (once a year). If there isany looseness should tighten the wire. 6)- Wipe the surface of the battery with soft cloth in a fixed interval (oncethree months) and always keep the accumulator clean. 7)- Avoid using any kind of organic solvents for cleaning the surface of theaccumulator.
| Nominal Voltage | 12V | |
| Rated capacity(20 hour rate) | 12AH | |
| Dimensions | Length | 151±1mm(5.94 inches) |
| Width | 98±1mm(3.86inches) | |
| Height | 96±1mm(3.74inches) | |
| Total Height | 101±1mm(3.98 inches) | |
| Weight Approx | 3.40Kg(7.50lbs) | |
| Capacity 25°C(77°F) | 20 hour rate(0.60A, 10.50V) | 12.00AH | |
| 10 hour rate(1.10A, 10.50V) | 11.00AH | ||
| 5 hour rate(2.04A, 10.50V) | 10.20AH | ||
| 1 hour rate(7.20A, 9.60V) | 7.20AH | ||
| Internal Resistance | Full charged Batteryat 25 °C (77°F) | 16mΩ | |
| Capacity affected by temperature(20 hour rate) | 40°C(104°F) | 102% | |
| 25°C(77°F) | 100% | ||
| 0°C(32°F) | 85% | ||
| -15°C(5°F) | 65% | ||
| Self-Discharge at 25°C(77°F) | Capacity after 3 month storage | 91% | |
| Capacity after 6 month storage | 82% | ||
| Capacity after 12 month storage | 64% | ||
| Charge (constant voltage) | Cycle | Initial Charging Currentless than 3.60A Voltage14.40-15.00 V | |
| Float | Voltage 13.50-13.80V | ||
| Terminal | T2,T3 | ||
Click enlarge Image