PP melt blown/spun cartrige filers
0 likes
China [CN] Features & Benefits• Absolute ratings (efficiency 99.98%; Beta rate: β 5000)• Surface pore structure spreads water flow to reduce pressure drop• Continuously gradient pore structure increases the capacity of dust holding, longer service life and high efficiency • High strength and pressure resistance• Micro-denier melt blown filtration fiber, high removal ratings• 100% PP for compatibility with a wide range of process fluids• Formed by thermal bond without use of any binders and adhesives
Minipore high performance pure polypropylene depth absolute rated filter media is under highly controlled manufacturing process which guarantees consistently reproducible filter performance. PM-series filters are comprised of an inner absolute rated section for exceptional dirt-holding capability and the outstanding performance which meets the highest quality requirements are selected for critical filtration application.PM-Series cartridge is able to retain contaminants throughout the entire cross section of the filter. The density increases progressively from the exterior surface to the interior and "graded density" allows larger particles to be trapped near the surface while smaller particles penetrate the larger open areas to be trapped nearer the center of the filter in the smaller openings.
• Drinking water treatment• Pre-filtration for RO+DI• Food and beverage• Plating, Chemicals and Solvents
• Material : 100% PP microfiber• Micron rating: 1, 3, 5, 10, ... 100um• OD. 62-65mm/110-115mm; ID. 28mm• Length: 5", 10", 20", 30", 40", 50", 60"
• Maximum differential pressure: 4.1bar at 20℃; 2.1bar at 60℃; 1.1bar at 80℃• Recommended change out: 2.0bar• Maximum temperature: 80℃
| Micron Rating(μm) | 1 | 3 | 5 | 10 | 25 | 50 |
| Dirt Holding Capacity(Gram/10"L) | >15 | >20 | >30 | >60 | >120 | >150 |
| Filtration PrecisionMicron Rating(μm) | Particles 1μm | Particles 3μm | Particles 5μm | Particles 10μm | Particles 25μm | Particles 50μm |
| 1 | >99.99% | >99.99% | >99.99% | >99.99% | >99.99% | >99.99% |
| 3 | >88.5% | >99.99% | >99.99% | >99.99% | >99.99% | >99.99% |
| 5 | >71.3% | >92.1% | >99.99% | >99.99% | >99.99% | >99.99% |
| 10 | >38.1% | >65.4% | >86.5% | >99.99% | >99.99% | >99.99% |
| 25 | >30.6% | >41.7% | >77.3% | >91.5% | >99.99% | >99.99% |
| 50 | >28.9% | >33.6% | >46.9% | >63.2% | >81.5% | >99.99% |
| Model PM | Media Type | Support Core | Dimension | Micron Rating | End Adaptor | Seal | Length Inch |
|
PM-1Standard PM-2Thin Groove PM-3Broad Groove PM-4Cavity Surface |
P-HighPerformance A-AbsoluteRate |
P-pp N-none |
S-ID28mmOD62-65mm B-ID28mmOD110-115mm L-ID96/114mmOD150mm |
01:1μm 03:3μm 05:5μm 10:10μm ...... ...... |
Code 0-DOE w/o adaptor Code 7 - 226/Fin Code 8 - 222/Fin Code 3 - 222/Flat closed Code S - Spring Cap |
E-EPDM N-Buna S-Silicone V-Viton |
5:5" 10:10" 20:20" 30:30" 40:40" 50:50" 60:60" |
Click enlarge Image