PTFE membrance pleated cartrige filers
0 likes
China [CN] Features & Benefits A. Hydrophobic PTFE membrane pleated cartridges with absolutely rated B. Cartridges consist of a PTFE membrane with thermally bonded polypropylene components to provide a very durable filter with only two materials of construction. C. Superior flow rate and efficiency maximizing performance D. Extensive applicability. E. Extremely good chemical compatibilityF. Good oxidation-resistance,high temperature-resistance G. Remove particles and microorganisms greater than 0.2µm from gas and liquid H. Cartridges 100％ integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance I. Flushed with ultrapure water to remove any manufacturing debris J. No adhesive,thermal bonded manufacturing without adhesives
A. Solvent filtration B. Sterile vent filters for storage tanks C. Coating-solvent in the electronic industry D. Filtration of non-aqueous chemicals E. Filtration of acid baths for the production of semiconductors F. Compressed Gas G. Pharmaceutical and intermediate Solvents
A. Media:Hydrophobic PTFE B. Support layer:Polypropylene C. Core/Cage/End adaptor:Polypropylene D. Sealing method:Thermal bonding
A. Max.Differential pressure: B. Forward-70psi (4.8bar) at 25℃ C. Reverse-40psi(2.7bar) at 25℃ D. Filters change recommended at 1.5bar E. Max.Operating temperature:95℃
A. Filtration Area:0.75㎡ each 10″length B. Outer Diameter:69mm C. Nominal Length:5″,10″,20″,30″,40″etc D. Micron Rating:0.1,0.2,0.45µm
| Micro Pore Size | 100% Ipa Bubble Piont |
| 0.1μm | 22 Psig (1.5Bar) |
| 0.2μm | 15 Psig (1.0Bar) |
| 0.45μm | 9 Psig (0.6Bar) |
| Model PTFE | Micron Rating | End Adaptor | Seal | Length |
|
PTFE - PTFE Pleated Type |
010:0.1μm 020:0.2μm 045:0.45μm |
CODE O - DOE Double Open End 7 - 226/Fin 8 - 222/Fin 3 - 222/Flat Closed 2 - 226/Flat Closed F - 215/Flat Closed S - O - Ring Insert/Flat Closed |
E - EPDM N - Buna S - Silicon V - Viton |
10:10" 20:20" 30:30" 40:40" |
Click enlarge Image