Magnetic Key chain holder
China [CN] Magnetic Key chain holder is is adsorbed on iron plate, tube, stick, angle steel and channel steel etc, easy to hang the wires,light,ground lines,key,hand tools and so on.Feature:
Controlled by On/off switch ,no fighting the magnet. .
Come with two holes so you can secure the holder in the meteal workpiece.
Release your hands, easy operate, fast setup, precise positioning.
Operating instructions:
1: Place the holder onto the metel load.2: Press the switch down and then rotate it in 180° clcokwise until to the right place, it can't work if the switch is on the wrong place. 3: If you want to remove the holder, make sure to put the switch down and then rotate it in 180° anticlockwise until to the right place. Please ensure that there is no danger or anything falling4 Before turning on or off the fixture, make sure that the power of the other tools is disconnected.5: The magnetic force is the strongest when vertical use, the level use is the second, and the inclination use is the weakest.
Notice:
1: Check the flatness and smoothness of workpiece surface, ensure the safty.2: Keep the fixture away from the dirt, debris, oil, that may effect the magentic force.3:To hold thick workpiece, the magnetic force is stronger than to hold the thin workpiece .4: Do not exceed the rated power of the fixture.5: There are many threaded holes on all sides to fix other workpieces or to be fixed on the devices .Please don't put the permeability magnetic material onto it, it may reduce the magnetic force.
6. Don't use the fixture as a ground connection welding holder, and also part of electric ciruit neither.7: Inspect the fixture regularly to ensure the accuracy of 90 degree angle.
Click enlarge Image