Multi-angle Magnetic Fixture
China [CN] Magnetic Fixture is suitable to fix iron plate, tube, stick, angle steel and channel steel etc, to prevent them from moving, and and can adjust the angle of the workpieces.Feature:
Magnetic grip on many sides,suit for muti-angle welding.
Controlled by On/off switch ,no fighting the magnet. .
Offer 3 or 4 common angels, can form precise offered angles.
Release your hands, easy operate, fast setup, precise positioning.
Operating instructions:
1: Place the holder onto the metel load.2: Press the switch down and then rotate it in 180° clcokwise until to the right place, it can't work if the switch is on the wrong place. 3: If you want to remove the holder, make sure to put the switch down and then rotate it in 180° anticlockwise until to the right place. Please ensure that there is no danger or anything falling4：Before turning on or off the fixture, make sure that the power of the other tools is disconnected.5: The magnetic force is the strongest when vertical use, the level use is the second, and the inclination use is the weakest.
Notice:
1: Check the flatness and smoothness of workpiece surface, ensure the safty.2: Keep the fixture away from the dirt, debris, oil, that may effect the magentic force.3:To hold thick workpiece, the magnetic force is stronger than to hold the thin workpiece .4: Do not exceed the rated power of the fixture.5: There are many threaded holes on all sides to fix other workpieces or to be fixed on the devices .Please don't put the permeability magnetic material onto it, it may reduce the magnetic force.
6: Don't use the fixture as a ground connection welding holder, and also part of electric ciruit neither.7: Inspect the fixture regularly to ensure the accuracy.
Click enlarge Image