MIMAKI JFX-1631 PLUS SERIES
Indonesia [ID] Specification for
Always striving for the best, Mimaki has achieved significant productivity enhancements for its flatbed UV LED printer series JFX with up to 80 % higher speeds. The new JFX plus series features a standard post-curing unit that enables printing of up to 23.6 sqm/h. This is nearly twice as fast as previous models.A roll unit has been developed to boost efficiency and productivity when printing on roll fed substrates.In addition, Mimaki's IMS* technology ensures the highest image quality exceeding your customers' expectations.*IMS=Intelligent Microstepping System
As standard, JFX plus series is now equipped with a post-curing unit that cures the print after its first exposure by UV LEDs thus enabling nearly double the print speed as previous models. Print service providers can now cater to their clients' needs for fast turnarounds, quick changes and short run orders while at the same time increasing productivity and efficiency.
*The speed charts above are in conditions of printing with CMYK.Print speed varies according to substrate.
Please note that when using the post-curing unit for high speed printing and curing, maximum print size is shortened by 150 mm (front), 250 mm (back) and 400 mm (total). The printer automatically switches sizes when post-curing is selected. Therefore please make sure to adhere to the maximum print sizes according to your selected print and curing mode.(The image on the left shows the maximum print size without post-curing)
JFX-1631/1615 printers can be upgraded to JFX plus series by installing the post-curing optionally.Please contact your service engineer for further details.
The new head positioning mechanism uses high resolution linear scale for fine step accuracy of dot placement.This results in far fewer banding artifacts and even the possibility to print legible 3pt characters.
High image quality is achieved by utilizing a resolution of up to 1200 x 1200 dpi and variable dot sizes. Even printing in 4-color mode realizes a non-grainy print, thus prints show smooth gradations and highly detailed images.
[Features] High scratch and chemical resistance, superior coloration.[Main Appli-cations] Flat surfaces, acrylic and aluminum compound boards, styrene boards, CCNB etc.
[Features]Gradation reproducibility is improvedwith light color inks.Ink flexibility gives the printed media bendability.[Main Appli-cations] Soft plastic, leather, panel, POP and package
[Features] 200% elasticity, suitable for embossing and other post-processing tasks.[Main Appli-cations] Flat and uneven surfaces, vehicle wraps, vinyl chloride film, packaging, banners etc
* As ink flexibility of LF-200 ink and LF-140 ink vary according to the substrate, please verify your substrate in advance.
*Sample print on transparent acrylic
Pallid, sallow image due to colored/transparent substrate.
Original vivid image colors are displayed due to white ink layer underneath the image.
Glossy or matte finishing varnish with clear ink* realizes astounding and eye-catching effects on your prints. Depending on your design, you can add protective coating to protect surface or spot coating for design accents.
* Clear ink can only be used with LH-100 ink
By printing several layers of ink and/or gloss, your images will not only look more enticing but also will have a haptic feel that will satisfy your clients.
While printing on rigid substrates up to 50 mm thickness is standard, JFX plus also answers the demand of print service providers for hybrid printing on roll media. An optional roll unit is available that enhances productivity and efficiency by accommodating unattended printing of several or different jobs* enabling fast turnaround times.
* Each job is limited by the max. print size of JFX plus.
Almost no VOCs are generated by UV curing print. In addition, diodes that are used for Mimaki's UV LED system feature a long lifetime and are using considerably less power than conventional UV lamps. Furthermore by using Mimaki's Eco-cartridge system, waste is reduced as the ink pack inside of the cartridge casing needs to be replaced.
* The post-curing unit employs a fluorescent UV tube lamp.
Click enlarge Image