New Mimaki DS Series High Speed Textile Printer - Model DS-1600, DS-1800
Singapore [SG] | Introducing a high resolution system which is more ecologically friendly and provides more efficient operation as compared to traditional sublimation transfer systems. |
|
|
The tension bar moves up and down to adjust proper feeding.Suitable for continuous operation.
In addition to the drive roller and friction roller, the take-up unit and feeding unit with a dancer roller cause tension in the fabric to prevent it from wrinkling. The fabric retainer holds both edges of the fabric preventing it from touching the print head.
In order to prevent ink from penetrated the fabric from marking other fabrics, a ditch is available.
The head configuration employs array of two staggered print heads.1-way (single ink set) for fast printing and 2-way (dual ink set) for multipurpose printing are available. In addtion both print modes can use either high speed print of 4-color or high quality print of 6-color.
| DS-1600 | DS-1800 | ||
|---|---|---|---|
| Printing head | Method | Piezo-electric drop on demand | |
| Nozzleconfigulation | Eight heads (4 x 2 lines, stagger arrangement) | ||
| Number of nozzles | <6-color print> 1-way: 360 nozzles 2-way: 180 nozzles | ||
| <4-color print> 1-way: 720 nozzles 2-way: 360 zozzles | |||
| Resolution | 360, 540, 720 dpi | ||
| Maximum printing width | 1620mm(60.7") | 1850mm(72.8") | |
| Head height adjustment | 1.2mm (0.04") to 10mm (0.39") | ||
| Print Modes1*) | 6-color printing | 360 x 360 dpi : 2 / 4 / 8 passes, unidirection / bidirection | |
| 360 x 540 dpi : 3 / 6 / 12 passes, unidirection / bidirection | |||
| 360 x 720 dpi : 4 / 8 / 16 passes, unidirection / bidirection | |||
| 720 x 720 dpi : 4 / 8 / 16 passes, unidirection / bidirection | |||
| 4-color printing | 360 x 360 dpi : 1 / 2 / 4 passes, unidirection / bidirection | ||
| 360 x 540 dpi : 3 / 6 / 12 passes, unidirection / bidirection | |||
| 360 x 720 dpi : 2 / 4 / 8 passes, unidirection / bidirection | |||
| 720 x 720 dpi : 2 / 4 / 8 passes, unidirection / bidirection | |||
| Ink type | Sublimation dyeink | Color (black, cyan, magenta, yellow, light cyan, light magenta) | |
| Textile pigmentink | Color (black, cyan, magenta, yellow) | ||
| Ink volume 2*) | 6 color print1-way: 220cc x 2 / color, 2-way: 220cc x 1 / color | ||
| 4 color print1-way: 220cc x 4 / color, 2-way: 220cc x 2 / color | |||
| Fabric | Type | Polyester / Cotton 3*) | |
| Width | 200mm (7.8") - 1650mm (64.9") | 200mm (7.8") - 1900mm (74.8") | |
| Thickness | less than 7mm (0.27") | ||
| Outside diameter | less than o 250 mm (9.84") | ||
| Roll weight | less than 30kg (66lbs) | ||
| Roll inside diameter | 1.5" - 3" | ||
| Printing surface | Printing can be made on either side | ||
| Roll end treatment | Light adhesive tape is used to allow the paper to be removed | ||
| Margin (roll fabric) | 10mm (0.39") ±0.5mm (0.01"), left side and right side | ||
| Interface | IEEE 1394, IEEE 1284 | ||
| Command | MRL-1E (ESC/PV.1 base) Mimaki original command | ||
| Operationalenvironment | Temperature | 15ºC ( 55ºF ) - 30ºC( 86ºF ) | |
| Humidity | 35 - 65 % Rh ( no condensation ) | ||
| Power | AC 100 - 240 V ±10% ( auto voltage ), 50 / 60 Hz ±1 Hz | ||
| Power consumption | less than 500W | ||
| Weight | 230kg (507lbs) | 250kg (551lbs) | |
| Outsidedimensions | Width | 2750mm (108.3") | 3040mm (119.7") |
| Depth | 940mm (37.0") | ||
| Height | 1350mm (53.2") | ||
Click enlarge Image