Quick Detail
Place of Origin
Brand Name
YULONG
Model Number
XGJ560
HS-CODE
8432-90
Package & Delivery Lead Time
Package
Iron Steel Box
Detailed Description
pellets. Especially it is fit for biomass waste from wheat straw, rice husk, coconut shell, palm
fiber and palm shell, very hard wood etc. It may also be applicable to biological fertilizer, organic
manure as well as fertilizer for low-temperature granulation.
biomass wood pellet machine mill/biomass wood pellet production line
General processes for biomass wood pellet production line:
A: biomass wood pellet machine mill/biomass wood pellet production line
Crushing stage: raw materials are quite critical, if your raw material's diameter is too large, i.e.
timber or log, a chipper will be required,then a hammer millwill be needed to crush these chips
into powder; chipper will not necessary for sawdust,straw,stalk,powder,husk,etc.
Below is wood chipper:
B: biomass wood pellet machine mill/biomass wood pellet production line Drying stage: moisture
content in your raw material is the key, if moisture content is over 20%, a dryer will be necesary
for you to dry raw materials before pelletizing;if MC is below 10%, you have to add some water
for increase the adhesiveness.The Optimal MC in raw material is 12-18%.
below is our dryer
C: biomass wood pellet machine mill/biomass wood pellet production line Pelletizing stage: A
pellet mill, also known as a pellet press, is a type of mill or machine press used to create pellets
from powdered material. Pellet mills are unlike grinding mills, in that they combine small materials
into a larger, homogeneous mass, rather than break large materials into smaller pieces.
below are our pellet machines:
D: biomass wood pellet machine mill/biomass wood pellet production line Cooling Stage:
After the pelletizing process, the temperature of the wood pellet is about 60-80 degree, and the moisture content of the wood pellet is about 15%, so we need use Cooler to
reduce about 3-4% moisture, such this the wood pellet is easy to store.
Below is our cooler:
E: biomass wood pellet machine mill/biomass wood pellet production line packing stage:
After cooling, the wood pellet will not directly enter into the fuel process, avoiding the wood pellet
affected with damp. The packing process is necessary. In this process, we assemble our
domestic best Packing Machine to you.If you need fully auto packing machine,we can offer you
as per your requirements: