LED lighting slip ring, 25.3 mm，12 circuits slip ring for spider lamp
China [CN] LPM-12A
The slip ring can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
It is also called a rotary electrical interface, commutator, collector, swivel or an electrical rotary joint. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. It’s the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
The LPM-12A miniature slip ring is a standard, off-the-shelf unit that uses gold contacts at the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.
The LPM-12A slip ring allows tremendous flexibility in dealing with system size restrictions. It is available in 4, 6 and 12 circuit configurations.
|
Specification |
|||
|
Circuits |
12 circuits |
Capsule Length |
25.3 mm |
|
Operating Speed |
0-300rpm |
Voltage Rating |
240VAC/DC or higher |
|
Working Temperature |
-20℃~ +60℃ |
Current Rating |
2A per circuit or higher |
|
Working Humidity |
60%RH or higher |
Dielectric Strength |
≥500 VAC @50Hz, between each circuit |
|
Insulation Resistance |
1000M Howe ohm and 500VDC |
Electrical Noise |
1 Howe ohm Min |
|
Contact Material |
Gold to Gold |
Lead Wire Length |
Standard 250mm |
|
Housing Material |
Aluminum alloy |
Lead Size |
30# silver plated copper |
|
Others：Transmitting Ethernet、USB、RS、Canbus and FireWire so forth. |
|||
Click enlarge Image