Quick Detail
Place of Origin
HS-CODE
96-
Package & Delivery Lead Time
Detailed Description
MFLD Electromagnetic Flowmeter series
Item description: MFLD Electromagnetic Flowmeter operates based on the principle of electromagnetic induction law of Faraday. Sensor consists of measuring tube, electrode, induction winding, iron core and yoke. It is mainly used to measure the volume flow of the conductive fluid and slurry in a close tube, such as the acid, alkali, salt and other fuild which is high corrosive. This item is widely used in oil, chemical, power supply, textile, food, paper making, environmental protection, water conservancy construction, etc.
1. Application
LDE electronic magnetic flowmeter is mainly used in oil, chemical industry, metallurgy and other industry fields. And it can measure the liquid which conductivity is equal or greater than 5us/cm. There is no moving parts or loss of pressure in a close tube and the measurement will not be affected by the density, viscosity, temperature, pressure and conductivity of the fluid. Multiple choices are available for the lining of converter and the material of electrode. Adopt a novel way of excitation. Low power consumption, stable zero point and high accuracy. This item is applicable for industries like oil, chemical, power supply, textile, food, paper making, environmental protection, water conservancy construction, especially the field of sewage treatment.
2. Main technology parameters
1. Accuracy: 0.5/1.0
2. Protection grade: IP65
3.: Measurement ratio 1:20
4. Maximum flow rate: 0.3~10m/s
5. Caliber: 10/15/20/25/32/40/50/65/80/100/125/150/200/250/300/350/400/500/600/700/800/900/1000(mm)
6. Signal output: pulse: 0~2kHz, span: 0~5V
7. Analog signal: 0~10mADC, load resistor ≤ 1.5KΩ
4~20mADC, load resistor ≤ 75KΩ
8. Voltage: 220VAC+10%, 50MHz4
9. Power consumption: ≤ 15VA
10. Power-off protection: longer than a year
3. Product features:
1. The measurement will not be affected by the density, viscosity, temperature, pressure and conductivity of the fluid.
2. There is no obstacle or loss of pressure in the measuring tube. Low requirements for straight tube.
3. The range of caliber is DN15~DN3000, multiple choices are available for the lining of converter and the material of electrode.
4. Adopt a novel way of excitation. Low power consumption, stable zero point and high accuracy. The volume flow range could be up to 1500:1
5. Sensor and transmitter can be made up into two forms: compact-type and remote-type;