Pad mist eliminator or mist eliminator mesh pads with applications

Quick Detail

Package & Delivery Lead Time

Detailed Description

Pad Mist Eliminator or mesh mist eliminator pads Has support grids at the top and bottom. Pad mist eliminator applications require special consideration to assure the removal of entrained moisture in the effluent gas stream. Woven wire mesh pad mist eliminator The woven wire mesh pad mist eliminator provides gas-liquid separation at lower mist eliminator cost. However, due to lower gas velocity limitations than vanes it requires larger more costly separator vessels to achieve effective separation. Mist eliminator pads materials Mist Eliminator Pads Mesh and grids may be made from most metals and plastics i.e. SS-304, 304L, 316, 316L, 430, Monel, Nickel, Copper, P.T.F.E. (Teflon), H.D.P.E., P.P. etc. and other metals, alloys or plastic which can be drawn or extruded. Mist eliminator pads are made up from knitted materials with interlocking asymmetrical loops of metal or plastic with typical wire diameters being 0.1 – 0.3mm. By careful choice of wire diameter, Knitted wire products have produced knitted mesh mist eliminators with extremely high free volumes (typically 98-99%) along with very high removal efficiencies and low pressure drop. Separations & Mass-Transfer Products Division has produced high efficiency knitted wire mesh mist eliminators for free water droplet removal from vapor streams up to 99% removal of droplets 3 micron and larger. Mist eliminator drain roles greatly improve glycol and amine solvent loss reduction. This role feature may be added or specified on any standard mesh pad application for increased droplet removal efficiency performance and overall capacity. Pad mist eliminator specifications: 1. Pad: demister 2 ft WD X 10 ft LG X 6 inch Thick 316 SS Size : 2 FT WD X 10 FT LG X 6 IN THK Material: 316 SS Density: 120 KG/M3 Contact surface: 400 M2/M3 Free space: 98.5% Application: fine entrainment. Width: 2 feetThickness: 6 inch Length: 10 feet 2. Pad: demister 12 inch width X120 inch length X 4 inch Thick 316 SS Size : 12 IN WD X 120 IN LG X 4 IN THK Type : COALESCER / demister Material: glass fiber -32 SWG Density: 15.3/4 LBS/CFT Contact surface: 400 M2/M3 Free space: 98.5% Application: fine entrainment. Width: 2 feet Thickness: 4 inch Length: 10 feet 3. Stainless steel demister pad ASY, 304SS, KOD 95-301 Description: Demister pad assembly fuel gas knockout drum Drawing No.: 2207V131 Material : 304SS Thickness: 200MM Density: 144kg/M Vessel ID No.: 1500MM Equipment tag No.: QCC-01-AUX-95-301 With support rin/ grid, the wire and holding fasteners pad shall be in section KOD operation conditions given below: fluid; fuel gas. Styles Approximate Density Kg/M3 Percent Voids % Entrainment Surface M2/M3 1 192 97.6 377 2 144 98.2 282 3 173 97.7 360 4 80 99.0 157 5 64 97.0 492 6 432 94.6 2000 Pad Mist Eliminators Pad Mist Eliminators

Basic Company Information

Greeny mist eliminator factory

Company Advantage

Detail Company Introduction