Before being put into normal production, a magnetic separator should be debugged. The debugging of magnetic separator machine is actually very easy, and the important thing is that the debuggers must have professional ethics and patience and work carefully and meticulous. The application debugging of
China magnetic separator is completed by the following four parts:
1. Stock bin
On the bottom of the stock bin, there is a free handle whose function is to control the material flow. Customers should adjust the material flow strictly according to the equipment output. Small material discharging will directly influence the product output, but if
China magnetic separator material discharging amount is high, the materials to be separated cannot be sufficiently separated, which will influence the product quality.
2. Rotating speed
The rotating speed should be adjusted according to the size and thickness of materials to be separated. If the speed is high, the content of Fe2O3 in the final products will be high, but if the speed is low, qualified products will be discharged together with Fe2O3, which will cause unnecessary loss to the company.
3. Distance between baffle and rolling copper
There is a baffle in front of the rolling copper and the baffle is also controlled with free handle. Customers should properly adjust the distance between baffle and rolling copper according to the size of materials.
4. Magnetic separation distribution
This item has been basically debugged by the manufacturers, so that it is not necessary to be adjusted.