high quality tungsten carbide nozzle with 3 grooves for sale

Quick Detail

Package & Delivery Lead Time

Detailed Description

Advantage of our products: 1) made from 100% raw virgin material 2) More than 10 years production experience 3) Advanced equipments 4)All products go through process and final inspection 5) All size available 6)Small/Trail order accepted Product Feature special shaped tungsten carbide nozzle from zhuzhou hongtong Our nozzles are built to speed the flow of gases, liquids and slurries of virtually any viscosity and to withstand punishing wear, erosion and/or chemical attack in harsh chemical and powder service environments. They have proved to be a high performance, long-lasting alternative to hard steel. For nozzles, tungsten Carbide nozzle is the most rugged and durable and provides the best value. A nozzle is a device designed to control the direction or characteristics of a flow (especially to increase velocity) as it exits (or enters) an enclosed chamber or pipe via an orifice. For nozzles, tungsten Carbide nozzle is the most rugged and durable and provides the best value. Tungsten carbide nozzle is made by the precision machining with the tungsten carbide materials (superhard alloy). The hardness reached over HRA90 degree while the anti-bending degree reached over 2300N/mm2. On machining tungsten carbide nozzle, we do the precision grinding and surface treatment to achieve Ra0.1 of the bore roughness and the Ra0.025 of the R place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle. Tungsten carbide nozzle is made from hot pressing with straight bore and venturi bore type. Due to its hardness, low density and excellent wear and anti-corrosion, Tungsten carbide nozzle has been widely used in sandblasting and shot peening equipment, offering a long life with optimum air and abrasive use. Product Specification/Models How to choose a tungsten carbide nozzle? When choosing a tungsten carbide nozzle, consider the amount of available air in cfm, the capacity of the blast machine and the inside diameter of the piping, and the blast and air hoses. For optimal performance, these elements must be compatibly sized. If too large a nozzle is used, low blast pressure and rapid wear on the blast hose will occur. If too small a nozzle is used, smooth media flow will be difficult to achieve. Application YG3X:For drawing non-ferrous metal wire and stainless steel wire etc. YG6:For drawing steel ,nonferrous alloy bars of less than dia 20mm under more stress and also for drawing tubes of less than dia 10mm. YG6X:For drawing steel and nonferrous wire or bars of less than dia 6mm under not so much stress. YG8:For drawing steel and nonferrous bars and tubes,Also for manufacturing mechanical parts, tools and wear parts. YG11:For fabricating drawing dies of steel tubes and rods under high compreesibility ratio; punching, stamping, forging tools under large stress. YG15:For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils ,drilling and punching and impacting dies. YG20:For making punching and impacting dies for watch parts and musical instrunments springs, batteries shells and tooth paste shells, etc,Also for making punching and impacting dies for steel balls of small diameters, screws and nuts, etc. YG20C:For making cold heading and cold punching and impacting dies for standardized parts, bearing s, bullet head and shell.etc. YG20D:For making cold heading and cold punching and impacting dies for standardized parts, bearing s, bullet head and shell.etc. YSN30:It is a demagnetized cemented carbide suitable for manufacturing forming tools in industries of magnetism. Other Information Categories of our products: 1) Carbide drawing dies; 2) Carbide rods; 3) Carbide strips; 4) Carbide inserts; 5) Carbide disc cutters; 6) Carbide balls/ tire studs 7) Carbide drilling bits; 8) Carbide Plates, 9) Carbide cold-forging dies; 10) Other customized items. About our service 1) OEM & ODM are welcomed; 2) Customized design is available; 3) Reply your enquiry in 24 working hours; 4) Experienced staffs answer all your questions in fluent English.

Basic Company Information

Zhuzhou Hongtong Tungsten Carbide Co.,Ltd

Company Advantage

Detail Company Introduction

Factory Information

Trade Information