Austenite stainless steel plate

Quick Detail

Package & Delivery Lead Time

Detailed Description

Grade: GB/JIS/ASTM/EN Thickness: 2.00~10.00mm Width: 750~1600mm Polish NO.1 Hot rolled, annealed, pickled, normally used as cold rolled material, industrial tanks and devices for chemical industry, etc. NO.2E Hot rolled black coils are cold rolled, annealed, scale broken, shot blasted and pickled. Mainly used as tanks, vessels, industrial structural parts, structural parts for vehicles and ships, cold forming parts and conveyor belt, etc. NO.2D Cold rolled, annealed, pickled and dull finish products. Mainly used as automotive components, deep drawing parts, building components and pipes, etc. NO.2B Cold rolled, annealed, pickled, skin-passed to give an appropriate luster at final stage., their glossiness and flatness are better than No.2D products. They can be competent for almost all the applications of cold-rolled stainless steel, such as kitchen and bathroom ware, surface polishing, furniture structural parts, etc. NO.3 The products achieved by grinding of No.2D surface with No.100~120 grinding belt. They have better glossiness and discontinuous coarse grain, and are used in inside and outside decoration of buildings, electrical appliance and kitchen installation, etc. NO.4 The productsachieved by grinding of No.2D surface with No.150~320 grinding belt. They have better glossiness and discontinuous coarse grain, but their grain is finer than No.3. They are used in elevator decoration, kitchen installation, inside and outside decoration of buildings, electrical appliance front panel, etc. HL The products achieved by continuous grinding of No.2D surface with polishing abrasive belt with appropriate grain size. They have relatively long continuous grinding stripe (further divided into No.150~320), and are mainly used in building decoration and elevator decoration, etc. BA Cold-rolled, bright annealed and skin passed products with extremely good surface glossiness and high reflectivity, are used in building decoration, home appliance product and kitchen installation, etc. Dull finish The products achieved by appropriate rolling of No.2D or No.2B surface with dull roll. They have matte finish and are used in building decoration and elevator decoration. Application: Petroleum industry,chemical industry,machinery,catering kitchen, sanitary ware, chemical equipment, household appliances, automobile, construction and decoration, nuclear power and other fields. Services: Polishing Capabilities • Thickness from .179" up to 10" • Up to 14 feet wide and up to 46 feet max length • One or both sides polishing & guaranteed pit/crevice free polishing available Standard Finishes*: • #3 (100 max Ra) • #4 (32 max Ra) • #6 (20 max Ra) • #7 (9 max Ra) • #7 plus (dull mirror) *We can provide ANY specific Ra or grit finishes required. We GUARANTEE not to exceed the maximum Ra required or quoted in any spot Additional Finishes: • Guaranteed Pit and Crevice Free polishing available in any size, thickness or finish • All finishes, except a full mirror, are capable of being produced on any size plate. Lifting Capacity: Up to 40,000 lbs. by overhead crane as well as a forklift. Send your material cut & drilled, or cut after polishing...your choice. • Diameters up to 14' max • 1/2" diameters up to 14' max • Irregular shapes • Pre machined shapes • Pre-beveled shapes, squares/rec • Pre-drilled + pre-perforated if hole is <=1.5 Pre-cut holes & penetration must be no larger than 1.5" at its largest dimension to polish without inner drops. Pre-cut Shape Nesting Program • Any cutting method acceptable long as the prime piece can be re-nested as a full square or rectangle.

Basic Company Information

Leyon International Trading(Shanghai) Co.,Ltd.

Company Advantage

Detail Company Introduction