Silicone Rubber for Potting Electronic Encapsulating

본문 바로가기


Home > Product > Silicone Rubber for Potting Electronic Encapsulating
Product
Silicone Rubber for Potting Electronic Encapsulating
Posting date : Jan 06, 2014
Membership
Free Member Scince Jan 06, 2014
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
Description of Silicone Rubber For Electronic Encapsulating&Potting RTV160 is a two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc. Features of Silicone Rubber For Electronic Encapsulating&Potting Easy mix with 1: 1 proportion Low viscosity, good flow ability Room temperature cure or heat up cure Thermal conduction, flame resistance Without solvent Using Instructions of Silicone Rubber For Electronic Encapsulating&Potting 1. Preparing: Clean up the coating surface, remove the rust, dust, oil dirt. 2. Pouring: Weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing. 3. Curing: Room temperature cure or heat-up cure is both workable. 4. It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contact with moisture in the air. Technical datasheetof Silicone Rubber For Electronic Encapsulating&Potting Item No. RTV 160 ColorGrey Viscosity mPa. S 25C3000~6000 Density g/cm31.57± 0.02 Pot life min 25C30 Curing time H24 Curing time with heat min 100C10 Hardness shore A55~60 Dielectric strength kv/mm 25C≥ 20 Volume resistivity DC500V Ω Cm3× 1015 Tensile strength Mpa≥ 0.6 Thermal conductivity w/m0.58 Temperature C-30~200 Note: Mechanical and electrical performance data tested at 25° C 7 days after curing, relative humidity of 55%; All the tested data is average value. Packaging of Silicone Rubber For Electronic Encapsulating&Potting Packs are available in 20kg and 200kg per drum. Storage & Transportation of Silicone Rubber For Electronic Encapsulating&Potting 1. Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months. 2. It can be stroked and transported as non-dangerous goods.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top