Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
Descriptions
XSG series roating drier is developed by our company, and its techinology is based on advance techinology adored.The machine is including many superiority, such as reasonable design, compact stuction, widly utilization, grrat productive capacity,good quality, high effect and save energy, Drying, grinding and sieve are completed in one equipment in once time. It eliminate pollution and the techinology is reached international advance level.
Principles
Hot air from machine bottom with suitable atomizing speed enter into the stirring and crushing room, it process raw material by cutting, shearing, blowing, floating and rotating. Then raw material is granulated through centrifugating, shearing, impacting and friction effect. This strengthens the process of heat exchange and water evaporation. Materials enters into the drier through the screwing feeding ostium, under the powerful high speed effect of stirring, materials are distributed by the function of striking, friction, shearing and cutting, raw materials are instantly smashed and fully contact with hot air, they are heated and dried, the dried powder material will be raised with the hot-air flow, small particles are discharged from the ring center and collected by cyclone segregator, the rest of materials are kept by graded ring and processed by centrifugal action, throw forward to the inside wall; then, drop to bottom, smashed and dried again. Because gas and solid are rotated together, inertia of solid is bigger than gas and the relative velocity between solid and gas is great, this strengthens the process of heating exchange. Therefore, this machine has strong drying capacity.
Features
◎Due to the material by centrifugal, shear, impact and friction particles of highly dispersed state process, and the gas-solid relative velocity between the larger, enhanced heat and mass transfer, so that the dry strength of the model.
◎The bottom temperature in the dry zone, heat-sensitive materials are not in direct contact with hot surfaces to solve the problem of heat-sensitive materials, coking discoloration.
◎Inside the drying chamber with high velocity, short residence time of materials, effectively prevent the material sticking closely guarded and sensitive material deterioration phenomena, high efficiency and fast, small equipment, large production. The upper part of drying chamber has graded ring, to control the water to reach very low moisture materials.
◎The device has to adapt to a wide range of materials to the state of granular powder paste from paste, first from a high of 85% water wet material dried to the desired finished product directly to the material.
◎The end of the device in the device due to jet into the air, so high pressure drop of the machine, the entire system of high power consumption is high.
Click enlarge Image
