JZ series shaft sinking winch

본문 바로가기


Home > Product > JZ series shaft sinking winch
Product
JZ series shaft sinking winch
Posting date : Dec 16, 2013
Membership
Free Member Scince Dec 16, 2013
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
S02-
Package & Delivery Lead Time
Detailed Description
USES: mainly used in coal mine, ore, non-metallic tunneling engineering of the borehole vertical suspension DiaoPan, water pump,, hair dryers, compressed air cylinder, grouting pipe etc tunneling equipment and tension on the rope, could also be other underground and ground hoisting up heavy use. Shaft sinking winders meet strict national standard. Among them, most important are: 1.The brake system should be dependable and accurate. The safety brake on the drum and the working brake on the motor-gear coupler each have a minimum brake torque no less than 2 times of the maximum working torque generated by the maximum load. ( If your country requires higher brake torque than 2 times, please indicate it in your enquiry.) 2.Main shaft material yielding strength is no less than 370MPa, the final tensile strength is no less than 630MPa. The material is 45# steel, equivalent of ASTM-A29/A29-04 1045 steel. All forged and heat treated. All main shafts of winders must gone through ultrasound NDT. 3.Winders work at –25 ~ 400C. With proper gear oil, it can go –40 ~ 500C. 4.All exposed rotating parts have protective shields installed. 5.The running is smooth, no cyclic noises, the total noise level is lower than 85dB(A). 6.All winders are tested under strict standard and quality certification paper to be issued before it goes out. 7.Working brake and safety brake are tested by hoisting the rated load at test tower. 8.5T, 10T, 16T, 25T and 40T models available. Single or double drums 9.Multiple brakes: main elec-hydraulic brake on drum; elec-hydraulic brake on speed reducer shaft coupler ; worm gear reducer also have braking function. 10.Hydraulic disc brake is an option.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top