Fiberglass Drywall Joint Mesh Tape

본문 바로가기


Home > Product > Fiberglass Drywall Joint Mesh Tape
Product
Fiberglass Drywall Joint Mesh Tape
Posting date : Dec 11, 2013
Membership
Free Member Scince Dec 11, 2013
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
S02-
Package & Delivery Lead Time
Detailed Description
Fiberglass Drywall Joint Mesh Tape: Specification: Width (mm): 25, 35, 48, 50, 100, 150, 200, 1000. Length (m): 10, 20, 30, 45, 90, 153 Mass: 55---85g/sq. Meter. Mesh: 3x3,8 × 8 or 9 × 9mesh/inch. Colour: White, yellow, blue etc... Drywall seaming tapes as well as private label and unlabeled tapes. Each roll is shrink-wrapped, or plastic hand bag. Other specification are available upon request. Testing standard: ASTM-D579 Installation: 1. Wall must be clean and dry; 2. Center and apply tape over the length of the joint and pressing firmly; 3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape. 4. Let dry completely, then sand slightly. 5. Apply sufficient thin finishing coats to produce a smooth wall surface. 6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering. Caution: * Failure to completely fill the joint may result in cracking * For best results, use a setting-type compound

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top