Quick Detail
Place of Origin
HS-CODE
90-
Package & Delivery Lead Time
Detailed Description
DR-278 Glazing machine operation manual
Installation and wire connection:
Connect the 5-pin plug of portable grinding head/hand piece to the OUTPUT socket at the main panel.
Connect the pedal switch to the foot S/W socket.
Select grinding mould of different sizes according to actual requirements,and fasten it into the front of the portable grinding head.
Switch the speed control to the left.
Connect with the main source power.
Operation:
Press the right function switch to manual control by HAND position,the indicator is lighted, the handpiece starts rotation slowly,the power indicator is red,and the diode LED is been lightened.
Turn the SPEED CONTROL to the right position,the handpiece’s speed is rotating faster,at this point,the green LED indicates the speed of handpiece is been lightened,the lighteness is changing as the rotation speed of the handpiece.
When the function switch is pressed to FOOT,step on the pedal the speed will be accelerated,and loose the foot,the speed will decrease(foot switch is optional).
The turning direction can be swapped: FWD means clockwise direction and REV means counterclockwise direction.
Adjust the speed of the grinding head within a reasonable range.
0 likes
Click enlarge Image
