Condensation Silicone rubber for mold

본문 바로가기


Home > Product > Condensation Silicone rubber for mold
Product
Condensation Silicone rubber for mold
Posting date : Oct 29, 2013
Membership
Free Member Scince Sep 28, 2013
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
Characteristic and Usage: E-625 is with the all the advantage of RTV-2 condensation cure silicone rubber, but is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cure silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very suitable for all kinds of mold with a variety of sizes, shapes and large sized plaster, cement,ect molds making. Typical properties: (Non-standard values) Model RTV-2 Appearance White Viscosity (cps) 14000~25000 Hardness (A°) 25~30 Tensile strength (Mpa) ≥35 Tear strength (KN/m) ≥25 Elongation (%) ≥450 Mixing ratio (%) 2~3 Operating time(Min) 5-10 Curing time(H) 2~4 Applications: RTV-2 can be used in not only the field of common RTV-2 moldmaking silicone. As the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has no problem of deep vulcanize or reverse reaction, ect problem. Therefore, our addition cure silicone is particularly applicable for large stones, plaster and cement product replication. It features with lower viscosity, high strength , good fluidity, can also be very suitable for precision complex pattern of the original copy. Package, Storage, Transportation and Attention: 1. Package: Rubber: 100kg/ Plastic pail; Vulcanizing agent: 2kg/ Iron pail. 2. Store in dry, well ventilated area, under shade, avoid rainwater and direct sun shine. 3. Storage period is 6 months. Stir uniform if its viscosity increases before using. Product exceeds shelf life may still be useful if meets specification. 4. These products are non-dangerous goods, but we must pay attention when using avoiding touching curing agent with skin and eyes. Once exposed with skin, clean immediately with detergent and water. If splash into eyes, wash them with flowing water at least 15 minutes and then consult a doctor.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top