Transfer print silicone rubber

본문 바로가기


Home > Product > Transfer print silicone rubber
Product
Transfer print silicone rubber
Posting date : Oct 28, 2013
Membership
Free Member Scince Sep 28, 2013
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
Introduction and usage: This series of products is two-component RTV liquid silicone rubber. It’s also called Transfer print mortar. It’s mainly used for making transfer printing pads in the printing machinery, also used for the electronics as potting materials. It has the excellent preparation for transfer print elastic materials. Characteristic: Product has low viscosity, good fluidly, easy mold release, acontractile, oil-tight, non-deformation, good Solvent ink resistance, good ink transfer. Heat can cure faster. Typical properties: (Non-standard values) Appearance A: ilky(red or yellow) liquid B: Achromatous transparent: Mixing proportion 100:2 Viscosity ≤30Mpa.S Tensile Strength ≥3.5Mpa Elongation ≥350% Hardness A0 20±10A Die B tear Strength 10±1KN/n Application: 1. Clean the rubber head mold thoroughly, display on a place of balance; 2. Put pad mortar and silicone oil into the measuring cup; 3. Mixing uniform, then place for 5minutes; 4. Add curing agent; 5. Full mix uniform; 6. After the Uniform mixing silicone slowly into the plastic head mold; 7. Mold release in 3-4 hours after cover the boards; 8. Transfer print silicone rubber is done. Package: Rubber: 20kg/ Plastic pail; Vulcanizing agent: 5kg/ Iron pail. Store: Store in dry, well ventilated area, under shade, avoid rainwater and direct sun shine.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top