Quick Detail
Place of Origin
HS-CODE
40-
Package & Delivery Lead Time
Detailed Description
1.Brief introduction
The SK-100 type tube locking machine developed by our factory is suitable for hooping processing of the assembly of high pressure rubber tube, fibre pipe and plastic pipe used in industry, agriculture and fluid drive of engineering machinery. It has the advantages of wide hooping range, high precision (adopt PLC control), high degree automation, easy operation and maintenance, etc.
2.Parameters:
Hooping steel wire rubber tube inner diameter: φ4～φ51IVmm
Industry tube inner diameter: 89mm at the most
Measuring scale precision:0.01mm
Max.opening:193mm
Crimping force:252T
Voltage:AV380V
Power:4KW(Oil Motor)
Weight:700kg
Measurment:length*width*height 630*850*1600mm
3.Working principle
The oil pump driven by the electric motor outputs the hydraulic oil and push the piston in the hydraulic cylinder to make up and down reciprocating movement. Thus makes the two columns connecting with the piston drive the above board realizing up and down reciprocating movement, making the pressing block in the recess of the two up and down large square board push the die holder, and making the die holder to give rise to radial shrinkage. And in the end realize the hooping of the rubber tube by module. When the shrinkage reaches the set value on the control panel, the hooping will stop automatically. The change valve reverses automatically. The hydraulic oil enters into lower chamber of the hydraulic cylinder and drives the above board to move upward making the mould hole to enlarge. Then we can take down the hooped rubber tube assembly.
0 likes
Click enlarge Image
