High Impact and wear resistant UHMW-PE sheet

Quick Detail

Package & Delivery Lead Time

Detailed Description

Ultra High Molecular Weight (UHMW) Polyethylene is often referred to as the world’s toughest polymer. UHMW PE is a linear high density polyethylene which has high abrasion resistance as well as high impact strength. UHMW PE is also chemical resistant and has a low coefficient of friction which make it highly effective in a variety of applications. Physical property: Property Standard Unit UHMWPE-M4 Physical Properties Density GB1033-86 g/cm3 0.93 Water Absorption GB1034-86 % < 0.01 Max Working Temperature - °C 90 Minimum Working Temperature - °C -269 Mechanical Properties - - - Tensile Strength GB1040-79 MPa 21 Ultimate Tensile Strength GB1040-79 MPa 38 Elongation GB1040-79 % 12 Break Elongation GB1040-79 % 340 E-Modulus GB1040-79 MPa 820 Notched Impact Strength GB1843-80 KJ/m2 ok Bending Strength GB9341-88 MPa 26 Bending E-Modulus GB9341--88 MPa 760 Compression Strength (deformation 10%) GB1041-79 MPa 27 Compression E-Modulus GB1041-79 MPa 550 Shear Strength GB1041-79 MPa 33 Hadrness GB2411-80 Shore D 65 Static Coefficient of Friction GB10006-88 - 0.07-0.15 Dynamic Coefficient Friction GB10006-88 - 0.07-0.11 Thermal Properties - - - Coefficient of Linear Expansion GB1036-89 °C-1 1.5×10-4 Coefficient of Heat Conductivity ( 23 °C ) GB3399-82 Cal/cm sec °C 8.5×10-4 Special Heat ( 23 °C) GB3399-82 Cal/g°C 0.44 Electrical Properties - - - Volume Resistivity GB1410-78 Ohm cm >1015 Surface Resistivity GB1410-78 Ohm >1015 Dielectric Constant ( 1MHZ ) GB1409-78 - 3 Dielectric Strength GB1408-78 Kv/mm 70

Basic Company Information

NINGJIN JUTAI CHEMICAL&PLASTIC CO.LTD

Company Advantage

Detail Company Introduction