Paint Bucket Mould

Quick Detail

Package & Delivery Lead Time

Detailed Description

With short cycle time(<30 SEC) Beryllium insert for the core top and cavity neck Optimization layout for quick air ejector Optimization layout for cooling system Full arrange from 0.5L-25L Pail mould technical points explainations. A. the explain regarding the pail mould core eccesntric causing the pail wall thickness not even and the pail out of center. 1. If the cooling is not equal in the different area of the pail mould core and cavity, this will cause the following difference of the melted material, the more hot area flowance will be bigger and the colder area the flowance will be smaller. then the hot area's pail wall thickness will be thicker. The temperature difference normally caused at least 0.05mm... 2.Normally, the pail mould the interlock height should be 20 to 30% of the plastic pail's height, for example the smaller pail should be 20%, the bigger pail mould should be around 30% height. 3.The machining process is meaning which kind of machining should we select and what we should take care when we make the machining to the pail mould core and cavity.

Basic Company Information

TAIZHOU HUANGYAN YOUGO MOULD & PLASTIC CO.,LTD

Company Advantage

Detail Company Introduction