swing gate

Quick Detail

Package & Delivery Lead Time

Detailed Description

Feature: 1) Easy access to electronic control modules. 2) Automatic drop barring arm during power failure. 3) Various operational methods available. 4) Option for indicator lights to be added. 5) Customized size & finishes available on request. 6) Low maintenance requirements. Specification： I. Scope of Application A turnstile can realize blockage and access control of a public passageway. Its mechanical part includes an emergency control device. At the time of power-off, the arms at both wings will open automatically to offer an access. At the time of electrification, the arms will reset. With a variety of configurations, it is fit for all buildings and can solve all control problems at the entrance and exit. II. Features 1. SUS304# 2.0mm stainless steel rainproof case NC punching, laser boring, a novel and beautiful design; 2. Unique installation surface, guaranteeing simple and convenient installation of system integrator's arm control equipment; 3. LINIX (the best micro-motor brand in China) brushless DC motor is used and its surface is plated with dichromate; 4. Programmable turnstile control, in one or two directions (set by user); 5. Pedestal is fixed by using expansion bolts. III. Introduction to the Brushless DC Motor Motor parameters: 45 ZW N 24-30/60JB Reduction gearbox number Output power: 30 stands for 30W Rated voltage: 24 stands for 24V Rotor magnetic material code: N stands for Nd-Fe-B Product Name Code: Z stands for DC, W stands for brushless Base Number: 45 stands for Φ45mm 1. Technical parameters 1.1 Structure: 204#/2.0mm in thickness, round stainless steel enclosure 1.2 External dimensions: ◇ Main column diameter: 169mm 1.3 Weight: 40kg 1.4 Length of rotating arm: 500mm-900mm (or customized) 1.5 Maximum load of rotating arm: 30kg 1.6 Rotating angle of rotating arm: 180° 1.7 Rotating direction: two directions 1.8 Power supply: AC220 ±10%V/50 ±10%HZ 1.9 Driving motor: brushed DC motor (24V) 1.10 Input interface: dry contact signal or 12V level signal or 12V pulse signal with a pulse width ≥100ms; driving current ≥10mA 1.11 Communication interface: RS485 standard; communication distance ≤1200m 1.12 Passage speed: 40 persons/minute (constantly open); 25-30 persons/minute (constantly closed) 1.13 Arm opening and closing interval: 1-2s1.14 Time needed to enter the passage state after power on: 3s 1.15 Time for automatic reset in case of trouble: 10s1.16 Working environment: ◇ Indoor, outdoor ◇ Temperature: -10℃-50℃ ◇ RH: ≤90%, no condensation 2. Main functions and features 1) Its trouble self-inspection and warning functions make user's maintenance and use very easy; 2) The equipment's running state may be programmed by the built-in small panel on the master control board; 3) Mechanical structure can prevent operators from being clamped or wounded. As a rotating arm is blocked in the process of reset, the motor will stop working within the specified time. The arm will reset again (until it is reset) after defaulted time delay and the strength is small (≤2Kg); 4) Access locking: rotating arm is locked automatically before an opening signal is received. 5) Rotating arm synchronization (for double arms); 6) Automatic reset: if a person fails to pass within the specified time after the turnstile is opened, the system will cancel authorization of this access automatically; 7) The turnstile may be set as constantly open or constantly closed in order to meet requirements of different sites; 8) Induction or time delay will reset automatically in 5 seconds (settable) after opening; and 9) Rotating arms open automatically in case of power failure while they close up at the time of electrification, satisfying the fire protection requirements. 3. Main structures and configurations ◇ Main column: one ◇ Rotating arm: one ◇ Control panel: one set ◇ Transformer: two ◇ Motor: one ◇ Core and driving section: one set IV. Control Interface Two paths of dry contact (or level) signal are input to control the motor in the direction of entrance and exit. V. Top Cover System integrator may, according to user's demands, install different user interfaces, e.g. induction card reader, magnetic card reader, fingerprint collector, Infrared detector, status indicator, and door-opening button, etc. VI. Operating Instructions The turnstile has two different operating modes. 1. The passageway is open permanently (obstacle free passageway); 2. Electric entrance control (IC, ID, barcode-based intelligent passageways) Both modes include an emergency design. In case of power failure, the arms at both wings will open automatically to allow a free access. The operating mode of both directions is defined according to the above codes, relating to the operation selected. VII. Work to be Done by Customer: Single phase 5A 220V power supply, the connecting wire of the control equipment should be grounded (connect controller's dry contact (or level) control signal wire to PASS1 or PASS2) Possible civil works and fixing 1、 Civil works Use 405# Portland cement concrete; foundation is 10-15cm in thickness; install the equipment 5-7 days after concrete work is completed. 2、Fixing Open the pedestal plate and you can see two 12mm holes. Use two 8mm*10mm expansion bolts to fix the pedestal.

Basic Company Information

shenzhen jinzongheng Technology Co,.Ltd

Company Advantage

Detail Company Introduction