Silicone for Life Casting

Quick Detail

Package & Delivery Lead Time

Detailed Description

RTV Life casting liquid silicone rubber Advantages 1. Platinum (PT) cure, good resilience 2. Non-toxicity, human skin color 3. Good tear strength and elongation Applications Life casting silicone suitable for human skin model made, Life casting, Masters, Prototypes, Decorative Component, Architectural Models, etc. Data of Lifecasting silicone Item No. SK5 Color liquid white Curing agent CA30 Mixing ratio 100:2 Mixed viscosity 9000-25000 cps Pot life 8-10 Minutes Curing time 4-6 Hours Hardness 5-10 Shore A Tear Strength 20 N/mm Tensile Strength 2.5 MPA Shrinkage 0.3% Elongation at break 650% Methods of molding Pouring Procedures 1. Make sure the surface of the original is clean and free of loose material. 2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container. 3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage. 4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base. 5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original 6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold. Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen. The information above is just for reference, if you're interested or have any questions, please feel free to contact Nicole: Web:www(dot)mcsilicone(dot)com E-mail:nicole(at)mcsilicone(dot)com Skype:nicoleszmc MSN: nicoleszmc (at)hotmail(dot)com

Basic Company Information

Mingcheng Group Limited

Company Advantage

Detail Company Introduction