Silicone Rubber for Shoe Mold Making

Quick Detail

Package & Delivery Lead Time

Detailed Description

DESCRIPTION SILASTIC RTV3010/3015 shoe mold making silicone rubber is a two-component material, consisting of Part A base silicone and Part B CA30 curing agent, cures at room temperature by a condensation reaction. These materials can be cast into the cured silicone mold: shoe mold making, sand casting etc.. FEATUREs 1. Good flow ability and long working time 2. Medium hardness 3. Easy de-mould from shoe mold 4. Low linear shrinkage APPLICATIONS SILASTIC RTV3010/3015 is suited for shoe mold, simple products, sand casting mold making, and shoe mold by pouring way. Base and Curing Agent Mixture(100:2 by weight) in 25 C(77F) testing Item No.  RTV3010 Color off-white Curing agent CA30 Mixing ratio 100:2 Mixed viscosity 10000-11000 cps Pot life 5-10 Minutes Curing time 4-6 Hours Hardness 10-13 Shore A Tear Strength 18 N/mm Tensile Strength 2.8 MPA Relative density 1.15 g/cm³ Shrinkage ≤0.3% Elongation at break 550% How to make the silicone shoe mold? 1. Make sure the surface of the original is clean and free of loose material. 2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container. 3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage. 4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base. 5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original 6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold. Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen. STORAGE When stored at or below 30 C (85F) in the original unopened containers, SILASTIC RTV3010/3015 Base and CA30 Curing agent have a usable life of 9 months from the date of production. Note: SILASTIC RTV3010/3015 is an industrial product and must not be used in food molding,dental human skin molding applications. Packing 20kg/drum,25kg/drum or 200kg/drum of Part A base silicone; 0.25kg/bottle,1kg/bottle and 10kg/bottle of Part B CA30 Curing Agent The information above is just for reference, if you're interested or have any questions, please feel free to contact Nicole: Web:www(dot)mcsilicone(dot)com E-mail:nicole(at)mcsilicone(dot)com Skype:nicoleszmc MSN: nicoleszmc (at)hotmail(dot)com

Basic Company Information

Mingcheng Group Limited

Company Advantage

Detail Company Introduction