RTV Pad Printing Silicone

Quick Detail

Package & Delivery Lead Time

Detailed Description

SILASTIC-MC RTV1023 PAD PRINTING SILICONE Advantages 1. Best choice for making silicone printing pad 2. Good printing effects 3. Excellent quality,good resilience Applications Pad printing silicone rubber is suited for printing of plastic toys,electronic toys,trademark,PVC toys etc. Data of RTV Silicone Rubber for pad printing pads making Model Color Viscosity (±2000) Mm2/s Hardness (Mpa) Tensile Strength (Mpa) Tear Strength (KN/mm) Elongation (%) Mixing ratio (%) Pot life (Min) Demould time (H) MC115 Translucent 18000 15±1 2.8 2.9 420 100:2 by weigh 30 6 MC123 Translucent 22000 23±1 3.5 3.9 480 100:2 30 6 MC130 Translucent 25000 30±1 4.0 4.4 460 100:2 30 6 Note: The technical datasheet just for reference, the hardness,color of the silicone can be adjust according your requirement Instructions 1. According the letters you want to printing to prepare the mold,choose the right hardness silicone and the catalyst,clean the mold with detergent,dry it with air gun,then brush a layer of release agent,dry it again. 2. Mixing Please weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.Thoroughly stir Part A base silicone before use, as filler separation may accour upon prolonged storage. Mixing Part A and Part B evenly until the CA30 completely dispersed in the base. Hand or mechanical mixing can be used,but do not for an extended period of time or allow the temperature to exceed 35C(95F). Mix suitably small quantities to ensure thorough mixing of base and curing agent. It is strongly recommended that entrapped air be removed in a vacuum chamber,allowing the mix to completely expand and then collapse. After a further 1—2 mins under vacuum,the mix should be inspected and can be used if free of air bubbles. A volume increase of 3—5 times will accour on vacuum de-airing the mixture. So a suitably large container should be chosen. 3. Curing the mixture and curing Pour the misxed Part A base silicone and CA-30 curing agent as soon as possible into the plastic mold avoiding air entrapment.The catalyzed material will cure to a flexible rubber within 6 hours(or faster by different mixing ratio or room temperature),we advice you de-mold after 24 hours ,it is will improve the replicate times of silicone mold. Attention Please according your product’s size,letters to choose the right hardness silicone. STORAGE When stored at or below 30 C(85F) in the original unopened containers,SILASTIC RTV1023 Base and CA30 Curing agent have a usable life of 9 months.from the date of production. Packing 20kg/drum,25kg/drum or 200kg/drum of Part A base silicone 0.25kg/bottle,1kg/bottle and 10kg/bottle of Part B CA30 Curing Agent Note: SILASTIC RTV1023 is an industrial product and must not be used in food products printing, dental human skin molding applications. The information above is just for reference, if you're interested or have any questions, please feel free to contact Nicole: Web:www(dot)mcsilicone(dot)com E-mail:nicole(at)mcsilicone(dot)com Skype:nicoleszmc MSN: nicoleszmc (at)hotmail(dot)com

Basic Company Information

Mingcheng Group Limited

Company Advantage

Detail Company Introduction