Quick Detail
Place of Origin
HS-CODE
54-
Package & Delivery Lead Time
Detailed Description
BOB-Visual Fault Locator 650-5
This Pen-type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification.
Applications
Maintenance in telecom, CATV
Test Lab of optical fibers
Fiber routing and continuity checking in optical networks
Other fiber optic measurements
Features
2.5mm universal connector,for 1.25mm connectors,
FC(male)-LC(Female) adaptor also can be provided on request
Operates either in CW or Pulsed mode with constant
output power
Low battery warning
Long battery life (up to 60 hours)
Drop-resistant and dust-proof design of laser head
Laser case ground design prevents ESD damage
Portable and rugged
Easy to use
Product Description
The Visual Fault Locator launches 650nm visible laser light into the fiber.
When the light encounters a break or sharp bend, it scatters, and the scattered
light can be observed emerging from the cable. The Visual Fault Locator can
locates breaks in short patchcords, which an OTDR cannot detect due to their
operating dead zone. A fault locator is also much cheaper than an OTDR.
However, they are not recommended for using with dark-colored or armored
cables.
The Pen-type Visual Fault Locator can be operated in either continuous wave
mode (CW mode) or in pulsed mode. Pulsed mode aids in locating faults under
high ambient light conditions and improve battery life. It also could be used in
checking connector quality. Often a connector may appears to be perfect. But
inside the connector ferrule itself, poor gluing or dirty may create a microbend
in the fiber. This microbend will produce excess insertion losses or return losses,
and may result in premature failure of the connector. As the visual light launches
through the fiber, it emerges from the connector in question, one can readily see
the distortion as a series of rings superimposed on a normal output. Bending or
twisting the fiber may affect the overall intensity pattern, but not the ring pattern
itself.
Specification
Model BOB-VFL650-5
Central wavelength 650nm±10nm (635nm is available on request)
Emitter type FP-LD (珀罗激光二极管)
Output power 5mw 10mw 20mw
Laser Range ≥5km ≥10km ≥20km
Optical connector 2.5mm universal connector, for 1.25mm connectors, FC (Male)-LC. (Female) convertor can be provided on request
Operating model Both CW and Pulse available
Pulse frequency 2Hz to 3Hz / 9Hz
Power supply 2AAA alkaline batteries
Operating temperature -20°C to 60°C
Storage temperature -40°C to 85°C
Dimension 13 x 176mm
Weight 50g (without battery)
Standard Package
Model Includes
BOB-VFL650-5 Main unit, User Manual,Individual packing