Grain Riner

본문 바로가기


Home > Product > Grain Riner
Product
Grain Riner
Posting date : Nov 28, 2012
Membership
Free Member Scince Nov 28, 2012
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
29-
Package & Delivery Lead Time
Detailed Description
Grain refiner Desofin 50g/capsule, can be put into the copper melt together with the sealing aluminum capsule packing while being used. 150 grams capsule for each 1metric ton of melted brass or melted alloy Alloy requirements Suitable for all copper alloy, including pure copper (99.85%) , Work best on brass alloy. Can be used to lower the casting temperatures and increase the castability and fluidity of the aluminum bronze, red brass and tin bronze. Also proper for aluminum high pressure casting, parts will come out bright and shiny Can be used on the dross which is being removed from the melt to get the trapped metal to flow back to the pool of liquid metal Also good for nickel, silver and gold to clean and grain refine. Method of use Products shall be free of any moisture. Any adjustments to the aluminum or zinc content of the melt should be made prior to adding Desofin. The surface of the melt should be reasonably free of slag. Desofin should be added to the melt by immersing the capsules at least 100 cm. below the liquid metal surface using a bell shaped plunger and the furnace should be in low tap. Stir the melt uniformly after putting Desofin into it. Expected benefits Improved Fluidity of the metal to be cast. Lower the casting Temperatures are possible depending on the size of the part to be cast and the type of mold to be used. Generally between 940 and 980 degrees C for beryllium copper molds. Lower temperatures are possible if the iron steel molds are used. Cracking Tendencies of the parts to be cast are greatly reduced and most often, cracks are eliminated. The occurrence of the sinks is greatly reduced. Lead is more uniformly distributed in the fine grain structure. Potential savings Savings over the cost of purchasing fine grained ingot. Reduction of casting scrap. Reduction in finishing and rework costs. Energy savings resulting from lower casting temperatures. It is not necessary to refine foundry scrap, i.e. gates, risers and turnings already grain refined.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top