CN Jadeblast

Quick Detail

Package & Delivery Lead Time

Detailed Description

CN Jadeblast blasting abrasive consists of a totally naturally occurring blend of Green Almandine Rock Garnet and Red Almandine Rock Garnet, both known for natural hardness, durability and abrasive characteristics. CN Jadeblast is an ideal blasting abrasive free of any heavy metals or toxic components and meets all occupational health and safety requirements. The unique blend of Green Almandine Rock Garnet and Red Almandine Rock Garnet gives CN Jadeblast a superior cutting speed and surface profile over most commonly used abrasives. CN Jadeblast is a general purpose blasting abrasive used in steel fabrication and bridge maintenance to remove rust, mill scale and weathered coatings. CN Jadeblast, at typically less than 0.5% free silica and total chlorides of typically 10-13ppm, meets even the most stringent industry and military specifications. CN Jadeblast grains clean deep into cavities and pitted areas down to bare metal, thoroughly removing all rust, soluble salts and other contaminants. The blasted surface is free of embedments and free of rogue peaks and troughs. SA3 white metal is achieved easily and an even surface profile of 45-55 microns and 55-75microns. CN Jadeblast is non-toxic blasting abrasive. There is no silicosis hazard, leachable heavy metals or radioactive contaminants. CN Jadeblast is processed to the highest standard of quality to meet strict in-house quality standards, in respect of mineral purity, chloride levels and free silica content. CN Jadeblast is produced by the world’s largest producer of Industrial Almandine Rock Garnet – the Rizhao Garnet Ltd. CN Jadeblast is available loose inside either a 1,000kg (2200lbs) or 2,000kg(4,400lbs) bulk bag, with an inside plastic liner and on a pallet. Alternatively, CN Jadeblast is available in 25kg paper bags (55lbs) shrink-wrapped on to a 1,000kg (2,200lbs) or 2,000kg (4,400lbs) pallet. CN Garnet Waterjet Cutting Abrasives CN Garnet waterjet cutting abrasives are extensively used in all renowned waterjet cutting machines around the world. Using the world’s best processing methods not only provides the highest purity garnet and highly accurate sizing of grains but ensures that there is no dust or ineffective fine grains to restrict garnet free flow with no oversize grains to block focusing tubes. A steady flow of garnet abrasives to the focusing tube that is free from blockages allows uninterrupted production without downtime resulting in optimum efficiency and lowest production costs. In addition, our crushed almandine rock garnet keeps more angular and sharper edges and increases the cutting speed significantly. Applications CNTM Garnet Waterjet cutting abrasives’ grades are available to meet all of your specific project requirements. It is ideally suited for all applications including: ● Aluminium ● Granite ● FRP / CRP ● Carbon Steel ● Marble ● Glass ● Copper ● Rubber ● Stainless Steel ● Wood ● Titanium Optimum Setup CN Garnet offers a choice of grades to match any focusing tube and orifice for any given cutting application. CN Garnet 80 Mesh: The most popular waterjet cutting abrasive grade used worldwide delivers the optimum balance of cutting speed and precision edge. CN Garnet 50 or 60 Mesh: Suitable for high speed waterjet cutting, it can in some cases deliver up to a 30% increase in cutting speed but at the expense of a reduced precision edge. CN Garnet 120 Mesh: For high precision and minimum tolerance edge waterjet cutting requirements. The table states the correct combinations of CN Garnet grades, focusing tube and orifice dimensions to suit your particular waterjet cutting requirements.

Basic Company Information

Rizhao Garnet Ltd.

Company Advantage

Detail Company Introduction