High Frequency Galvanic Facial Beauty Machines <312>

Quick Detail

Package & Delivery Lead Time

Detailed Description

Detailed Product Description Portable Microcurrent Facial Machine <312>, High Frequency and Galvanic microcurrent facial machine, Portable Microcurrent Facial Machine <312> General Introduction: " Portable Microcurrent Facial Machine <312> " has two basic functions: High frequency and galvanic. Each function has its independent switch. when they are working together , they don't affect each other . Usage: High Frequency 1. Connect the power wire to the back of the machine and plug in to power source. 2. Connect the High Frequency wire to the machine. 3. Choose the relevant glass tube according to need. (Mushroom tube is for big area: face/forehead/neck; Tongue tube for medium area; Bent tube for small area.) 4. Sterilize the glass tube with ethyl alcohol. Then fix the glass tube into the high frequency wand. First press the glass tube onto customer’s skin, then turn on the switch, adjust the intensity gradually from weak to strong to which customer can accept. 5. Analgesia starts from forehead, from up to down rotational slide. This process is about 5 minutes. For dry skin, please do it in low intensity in short time. For oily skin, the intensity can be a little bit stronger and the time can be a little longer. Contact the glass tube on skin at intervals, it will bring forth sparkles, which can sterilize, diminish inflammation, and promote acne skin to recover and astringe. This is an effective way to cure acnes. 6. It can also be used to treat eye pouch. Quicken to remove eye sag and dark eye circles. Galvanic Lead in & Lead out 1. Connect the galvanic accessories into relevant holes on the machine. The metal bar is held by the customer, while the rolling bars are held by beauticians. 2. Press “POWER” key. Choose Galvanic Lead in or Galvanic Lead out according to the nature of the essence. “+" means positive ion lead in, “-" means negative ion lead out. 3. Adjust the intensity according to need. Precautions: 1. Don't use high frequency on an area for too long time, in case of burning the skin. Please adjust the intensity from weak to strong. 2. Please turn off the intensity switch or power first before install or disassembly the glass tube. Please keep all glass tubes clean & dry. 3. Please adjust the intensity gradually from weak to strong when doing the Galvanic Lead In. Never suddenly turn it to strong. It’s normal that skin slightly stings. 4. Please clean and dry the skin before operation. Watches and metal ornaments must remove. 5. Patients with angiocardiopathy or sensitive skin are not suitable to use. 6. Don't put the machine in humid places. 7. Never touch the eye ball by High frequency glass tip. Specification: Item NO. Voltage Frequency G.W. Package Au-312 110V/220V 50Hz-60Hz. 5kg 50*37*19cm

Basic Company Information

Guangzhou Auro beauty equipment Co.,Ltd.

Company Advantage

Detail Company Introduction