Quick Detail
Place of Origin
HS-CODE
82-
Package & Delivery Lead Time
Detailed Description
More details please click
http://www.x431.us/product.php?id_product=583
Volvo 88890020 is the latest Volvo diagnostic tool for Volvo trucks, buses and other heavy vehicles.
Volvo 88890020 or Volvo Interface is developed for Volvo and Mack heavy vehicles (trucks, buses) and egnines. Communication unit enables PC to vehicle communication, the device connects to the PC via USB cable or by WLAN using the 802.11 b/g connection standards. Before the 88890020 communication unit can be used, a driver must be installed on the PC. In addition, a utility application (Admin0020) can be used to check the status of the device and update the firmware if and when needed.
There are three different ways, described below, of connecting communication unit 88890020:
Via USB-cable
Connect the communication unit to the vehicle.
Connect the USB-cable between the communication unit and the PC.
Select communication unit 88890020 and USB-cable setting in window Alternative.
Directly to the communication unit
Note: Your PC must have Wireless LAN 802.11b/g and support for 128 bit WEP (encryption), if it is to be used for direct communication with the communication unit. The Panasonic CF29 has this built into the motherboard. Additional Wireless LAN cards will be recommended in the future.
Connect the communication unit to the vehicle.
Select communication unit 88890020 and Direct to communication unit in window Alternative.
Security level Directly to the communication unit
Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is generated automatically and is not seen during the configuration.
Via an access point
Note: Contact the local IT-support or network technician before installation.
Connect the communication unit to the vehicle.
Select communication unit 88890020 and Via an access point in window Alternative.
Security level Via an access point
There are three alternatives for this:
WEP and MAC-address. Communication is performed using 128 bit WEP, Wired Equivalent Privacy. The WEP-key is written in during configuration. The MAC-address is to be written into the access point for additional security. WPA and PSK. Communication is performed via WPA, Wi-Fi Protected Access. 802.1x. Communication is performed using standard EAP_MSCHAP v2. The communication unit is then treated as a PC and will be logged on to the network using a username and password.
Product description for communication unit 88890020. Communication unit 88890020 has a number of different coloured LEDs. These LEDs show the status of the communication unit and indicate warnings, etc. Refer to the table below for an overview.
VCADS Pro (Vehicle Computer Aided Diagnostic System and Programming), VTT(Volvo Tech Tool),RTT(Renault Tech Tool),PTT(Premium Tech Tool), is the after market tool for diagnostics, calibration, and programming support. This program is used when working on vehicles with Volvo engine electronics 1992 and later. This tool enhances the diagnostic and programming attributes of the vehicle. Utilizing the J1587/1708 information link. VCADS Pro has the ability to perform task such as engine compression test, calibration of the instrument cluster, and programming of software and customer parameters.
Also our communication adapter possible to use with MATRIS – MAchine TRacking and Information System .MATRIS –The purpose of the application is to collect technical information about VOLVO Construction Equipment’s products in use and present the information to the operator, and forward it to certain sites, as the main office of VOLVO Construction Equipment.The information is accumulated and stored in the ECUs (processor) of a machine during the life cycle of the machine. The process of collecting information is called reading.The processing of the information into compiled presentation material in the PC gives a comprehensive understanding about the usage and the quality of the machines
Datalink interface which produces our company for "Vcads Pro” working well with all Volvo trucks produce from 1992 to now days.
Also our datalink adapter (interface/translator device), (with different connection cables ) and program "Vcads Pro” can communicate with trucks, buses and construction “Volvo” Loaders, Excavators, Scrapers (look for full inventory).
Click enlarge Image
