Polycarbonate/ PC Polycarbonate PC, Clear Polycarbonate, Resins)

Quick Detail

Package & Delivery Lead Time

Detailed Description

Polycarbonate/ PC/polycarbonate /acrylic(fiberglasspolycarbonate PC, plexiglass, resins). Fiberglass PC Polycarbonate The processing is: Clean Polycarbonate (PC) bottels that come from the bottling plant and are put into the grinder and packed into resin bags, there have NO PROCESSING, rinsing or washing. Acrylic(polycarbonate PC, plexiglass, resins)fiberglass Specificationspc resin(acrylic(polycarbonate PC, plexiglass, resins) Good quality big quantity Recycle Polycarbonate (PC) Resin for bottling industry. Acrylic (fiberglass, polycarbonate PC, plexiglass, resins) 1) The production of grind material (PC) can be around 2 containers every 40 days. 2) One 40ft HQ usually can fit between 24-26 tons. Acrylic(polycarbonate PC, plexiglass, resins) 3) If one 20ft can only fit about 12 tons. The material is POLYCARBONATE (PC) 100% and NOT PET. Acrylic(polycarbonate PC, plexiglass, resins) Item Test conditon Test method Test data Date unit MFI --- ASTM D-1238 10 g/10min Density --- ASTM D-792 1200 kg/m 3 Water absorption 24hr,23 ASTM D-570 0.15 % Balance water absorption 23,relative humidity 50% ASTM D-570 0.32 % Refractive index --- ASTM D-542 1.586 --- Light transmittance --- ASTM D-1003 89 % Mould Shrinkage --- ASTM D-955 0.005-0.007 mm/mm Proportion --- ASTM D-792 1.20 --- Fog level --- ASTM D-1003 0.7-1.5 % Tensile strength Yield point ASTM D-638 60 MPa Tensile strength breakpoint ASTM D-638 71 MPa Elongation Yield point ASTM D-638 60 % Elongation breakpoint ASTM D-638 150 % Modulus in tension --- ASTM D-638 2410 MPa Bending strength --- ASTM D-790 96 MPa Flexural modulus --- ASTM D-790 2410 MPa Notch impact strength 23 ASTM D-256 900 J/m Impact strength 23 ASTM D-256 Uncracked --- Falling Weight Impact Strength 23 ASTM D-3763 87 J Rockwell hardness --- ASTM D-785 73 M scale Glow filament test 2mm IEC 695-2-1 850 Comparative tracing index 2mm IEC 112 250 v Dielectric strength 60HZ ASTM D-149 17 kv/mm Dissipation factor 60Hz ASTM D-150 0.001 --- Volume Resistivity 23 ASTM D-257 2.0×10 17 cm Average burning degree --- ASTM D-635 25 mm Distortion temperature Anneal 0.45MPa(4 mm) ASTM D-648 144 Distortion temperature Anneal 1.82MPa(4 mm) ASTM D-648 141 Distortion temperature Unannealed 1.82MPa(4 mm) ASTM D-648 128 Vicat softening point 50 /hour ASTM D-1525 149 Linear heat shrinkage -40-82 ASTM D-696 68×10 -6 mm/mm/ Aerobic modulus --- ASTM D-2863 26 %

Basic Company Information

TAIRONG CHEMICALS INDUSTRY LTD

Company Advantage

Detail Company Introduction