Basic Company Information
Fiko Ltd
TEL : 380-44-2016229 / FAX : 380-44-2016136
1 Nova Kiev Kiev Ukraine, CIS [UA]
Company Advantage
Detail Company Introduction
1. Manufacture and supply of titanium ingots and titanium slabs
ASTM Grade 1; ASTM Grade 2; ASTM Grade 3, ASTM Grade 4; Ti6Al/4V; ASTM Grade 5; ASTM Grade 9
at FIKO Electron-Beam Metallurgical plant.
1. Titanium ingots can be manufactured as
a) CP (commercially pure) titanium ingots which fall into two groups – titanium ingots, titanium ingot with low oxygen content 0.04-0.08% and with alloyed oxygen content as per ASTM Grade-1; ASTM Grade-2; ASTM Grade-3, ASTM Grade-4.
b) titanium ingots with ligature supplement, melted according to ASTM Grade 5, Grade 9
and GOST OT4, OT4-0, OT4-1, VT3-1, VT5-1, VT6, VT6S, VT14, VT16, VT20, VT22, VT23, PT1M, 5V alloy, PT3V, PT7M.
2. Titanium ingots, titanium ingot are produced in different diameters.
FIKO metallurgical mill produced titanium ingots dia 370mm, dia 400mm, dia 630mm. at present a new melting facility is being constructed which is purposed to melt titanium ingots dia 800mm, 860mm.
3. Titanium ingots, titanium ingot are produced in different lengths.
We melted titanium ingots with length 1000-2000mm. The new facility will be able to melt titanium ingots up to 4000mm in length.
4. Titanium ingots, titanium ingot are produced in different weight.
Titanium ingots produced by us before weighted 700 to 3200 kg. With new melting furnace we will have possibility to melt ingots of nearly 12 000 kg weight.
The main parameters of titanium ingots depend on market demands. For production of titanium bars the most suitable will be titanium ingot dia 370mm, for rolling of titanium sheets and titanium plates the ingots with dia 630-860mm are the best choice.
Very often customer need titanium ingots Ti6Al-4V dia 200-250mm. Normally, such titanium ingots are used in manufacture of titanium golf clubs instead of more expensive titanium bars.
5. FIKO’s new melting facility is also purposed for melting titanium slabs.
Titanium slabs will be produced in following dimensions
height of titanium slab - 400-500 mm
width of titanium slab - 1050-1325 mm
length of titanium slab - 4000 mm
Titanium slabs will be supplied either in mechanically turned (machined) condition or with non-machined surface.
FIKO metallurgical plant produces titanium ingots both turned and not turned with dia 370, 400, 450, 510, 600, 630, 800 mm and titanium slabs both machined and non-machined and supplies such titanium ingots and titanium slabs to the market of Asia, Europe and America.
Quality control of titanium ingots and titanium slabs starts with titanium sponge, titanium scrap and titanium cuttings quality control.
In manufacture of titanium ingots, titanium slabs, titanium ingot, titanium slab the following grades of titanium sponge are used TG-90, TG-100, TG-110, TG-120, TG-130 and in exceptional cases TG-150.
Titanium scrap, used in melting titanium ingots, titanium slabs, titanium ingot, titanium slab, can be ASTM Grade-1; ASTM Grade-2; ASTM Grade-3, ASTM Grade-4, ASTM Grade 5, Grade 9 or GOST OT4, OT4-0, OT4-1, VT3-1, VT5-1, VT6, VT6S, VT14, VT16, VT20, VT22, VT23, PT1M, 5V alloy, PT3V, PT7M.
Titanium sponge should be supplied in pressurized drums and with mill certificate. Chemical composition of titanium sponge is checked by analyses and if the results conform to the figures indicated in certificate, the sponge is used in production of titanium ingot, titanium ingots, titanium slab, titanium slabs.
Before melting of titanium ingots or titanium slabs, titanium sponge should be pressed and sorted in accordance to customers’ demands regarding oxygen and iron content. Such sorting of titanium sponge allows us to make orders for titanium ingots with low oxygen content 0.04-0.08%.
In case we have to melt titanium ingots or titanium slabs with high oxygen content 0.20-0.25%, then TiO2 is added to titanium sponge while pressing. After that titanium sponge is prepared for melting.
At our plant titanium ingots, titanium slabs are melted by electron-beam method.
The process of manufacture of titanium ingot, titanium ingots, titanium slab, titanium slabs is rather laborious and difficult because there are no companies in Ukraine who could supply titanium scrap in prepared for melting condition. The specialists of FIKO have to sort out titanium scrap thoroughly because the quality and purity of titanium ingots and titanium slabs depends on the quality of titanium scrap.
FIKO metallurgical plant usually melts Ukrainian titanium scrap into titanium ingots and titanium slabs only of VT1-0, VT6 and PT3V grades, because in melting titanium scrap consisting of the pieces of titanium bars, sheets and plates some part of alloyed elements are burned out and it is necessary to add the ligature. That’s why the production of titanium ingot, titanium ingots, titanium slab, titanium slabs in OT4, OT4-0, OT4-1, VT3-1, VT5-1, VT14, VT16, VT20, VT22, VT23, PT1M, 5V alloy, PT7M is not profitable.
Moreover, titanium ingots and titanium slabs in OT4, OT4-0, OT4-1, VT3-1, VT5-1, VT6, VT6S, VT14, VT16, VT20, VT22, VT23, PT1M, 5V alloy, PT3V, PT7M should be double melted.
This is the reason we are interested in partners from Europe, Japan, South Korea, USA who supply titanium scrap (remains of titanium bars, titanium sheets and titanium tubes) ASTM Grade-1; Grade-2; Grade-3, Grade-4; Ti6Al/4V; Grade-5; Grade-9.
Titanium scrap from titanium bars, titanium sheets, titanium plates, titanium tubes should be sorted and prepared for melting and supplied with quality certificate.
The best scrap for melting titanium ingots and titanium slabs if the scrap from titanium sheets and titanium plates, because titanium scrap from titanium bars and titanium tubes cannot be piled into melting boxes tight enough. The scrap from titanium sheets and titanium plates is preferable because one melting yield of titanium ingot or titanium slab from sheets plates scrap is more than
from scrap of bars and tubes.
After melting of titanium ingot or titanium slab it is cooling stage. Then titanium ingot or titanium slab is turned. While turning the test samples are picked out for analysis of chemical composition of melted titanium ingots or titanium slabs. Titanium turnings taken from definite titanium ingot or titanium scrap are forwarded to laboratory for analysis. After we get the conclusion of chemical laboratory we issue quality certificate for titanium ingot or titanium slab.
Ultrasonic testing is carried out only for titanium ingots and titanium slabs with mechanically turned (machined) surface. In certificate for such titanium ingots or slabs we make a mark about ultrasonic control. In case customer’s demand is titanium ingot or titanium slab is with non-machined condition it is supplied without ultrasonic testing.
2. Supply of titanium materials:
titanium ingots,
titanium slabs
titanium sheets, titanium plates,
titanium bars / titanium rods (titanium hot-rolled bars, titanium forged bars),
titanium tubes / titanium pipes (titanium seamless tubes, titanium welded tubes),
titanium wire
to any country of the world, allowed by UNO, and arrange delivery by air, sea container or truck.
3. Make titanium billets, blanks and other half-finished products from titanium bars, titanium sheets, plates, wire, titanium tubes of different alloys.
4. Take orders for production of titanium tanks, titanium heat exchangers and other titanium equipment and its installation instead of stainless steel equipment.
5. Take orders for fabrication of electron-beam facilities for melting ingots from non-ferrous metals such as titanium, zirconium, copper and other.
6. Services on working out the drawing for electron-beam melting furnace fabrication.
7. Drawings design or taking order for manufacture of electron-beam guns.
8. Melting facilities assembling.
9. Production of titanium tanks, titanium side-bars (cylinder shell), titanium heat exchangers, non-standard equipment from titanium according to your or our own drawings
10. Manufacture or consulting services on manufacture of titanium rings, titanium disks, titanium blanks, titanium flanges, titanium fittings, titanium bends, titanium elbows, titanium reducers from titanium VT1-0, VT1-00 and titanium alloys OT4, OT4-0, OT4-1, VT3-1, VT5-1, VT6, VT6S, VT8, VT9, VT14, VT16, VT18, VT18U, VT20, VT22, VT23, VT25, PT1M, 2V alloy, PT3V, PT7M, alloys 14, 19, 27, alloy 37, 40; 5V alloy, alloys TC5, TC6, AT3, AT6; as well as ASTM Grade 1, Grade 2, Grade 5, Ti6Al-4V, Ti6Al-4V ELI.
11. Agent's services on purchasing of other non-ferrous and ferrous metals for you at Ukrainian market: stainless steel, bronze, copper, brass, aluminium, molybdenum, zirconium, heat-resistant steel and other metals and alloys.
12. Technical consulting:
- concerning titanium metal and its characteristics
corrosion-resistance of titanium and titanium alloys, yield strength, tensile strength of titanium and titanium alloys, weldability of titanium and titanium alloys, salts of titanium and titanium alloys, titanium dioxide, application and interchangeability of titanium and titanium alloys grades.
- on titanium and titanium alloys grades, we will help you to determine which titanium alloys belong to alpha, alpha-beta and beta alloys.
- concerning compatibility and analogies of titanium grades; we will send tables of correspondence of titanium and titanium alloys grades according to GOST and ASTM, also sample certificates for titanium materials VT1-0, VT6, VT6S, PT3V (that correspond to Grade 1, Grade 2, Grade 5, Grade 9 in accordance with ASTM).
- concerning substitution of stainless steel materials for titanium materials, application of titanium instead of stainless steel in manufacture of equipment. And also concerning substitution of stainless steel bars, stainless steel sheets, stainless steel plates for titanium bars, titanium sheets and titanium plates.
- about corrosion-resistance of titanium and titanium alloys in compare to stainless steel, aluminium, copper, molybdenum, zirconium and other metals.
13. Consulting services on Ultrasonic testing:
- ultrasonic testing of titanium ingots;
- ultrasonic testing titanium forged turned bars
14. Ultrasonic testing of materials with own equipment:
- ultrasonic testing of titanium ingots;
- ultrasonic testing titanium forged turned bars;
16. Information service about Ukrainian enterprises dealing with titanium welding and welding equipments manufacture.
17. Provide comparative information about chemical composition and mechanical properties of titanium and titanium alloys according to GOST, ASTM, AMS, Chinese alloys and other standards.
18. We offer melting and supply of titanium ingots from customer’s titanium scrap and titanium sponge on give-and-take basis.
The minimum quantity for manufacture of titanium ingots dia 630mm – 2500 kg.
The scrap should be supplied by customer in prepared condition for melting it into titanium ingots. The quality of melted ingots (the purity of titanium ingots chemical composition) depends on the quality of titanium sponge or titanium scrap.
According to customer’s specific order we can melt titanium ingots ASTM Grade 1, Grade 2, Grade 3, Grade 5, Ti6Al4V, Grade 9 with low oxygen 0.04-0.08% and titanium ingots with oxygen content according ASTM specifications.
Also we will produce titanium ingots according to specific customers’ requirements.
Moreover, it is also possible to melt titanium ingots from titanium scrap of mixed grades with iron supplement. In case the customer does not require excellent quality, but is concerned about price we can offer melting of ingots from mixed scrap.
We will consider cooperation on give-and-take basis: supply of titanium ingots melted from you titanium scrap or sponge – titanium ingots ASTM Grade 1, Grade 2, Grade 3, Grade 5, Ti6Al4V, Grade 9 or GOST VT1-0, VT1-00, OT4, OT4-0, OT4-1, VT3-1, VT5-1, VT6, VT6S, , VT14, VT16, VT20, VT22, VT23, PT1M, 2V alloy, PT3V, PT7M.
The minimum order quantity of titanium ingots dia 370mm, 400mm, 630mm, 800mm – 2500 kg.
For all titanium ingots melted at our plant we give quality certificates either for the whole lot or for each separate titanium ingot if necessary.
In certificate all the technical details of titanium ingots are indicated: melting number, lot number, dimensions of titanium ingot (dia, length), total; weight of melted titanium ingots and weight of each titanium ingot, chemical composition of titanium ingot, including gases content in chemical composition of titanium ingots.
We supply titanium ingots either in turned (machined) condition or with surface after melting.
On customers’ request we can also make ultrasound (ultrasonic) testing of titanium ingots. The information about method of ultrasound testing of titanium ingots you may find on other pages of our website.
After ultrasonic testing of titanium ingots or titanium ingot we issue quality certificate with a mark that titanium ingots are ultrasonic tested.
In order to issue such certificate we make analysis of chemical composition. The analyses is carried out on the basis of titanium turnings or a small piece of titanium ingot, which are being stored at our plant for a definite time. This enables us to make the analysis once again to check the conformance of titanium ingot’s chemical composition to the figures indicated in certificate.
19. Supply of titanium materials in small quantities by courier mail (DHL, TNT)
We offer supply of titanium materials available on stock in small quantities (mini supplies) by courier mail.
We can supply titanium bar or titanium bars of following grades according to GOST
VT1-0, VT1-00, OT4, OT4-0, OT4-1, VT3-1, VT5-1, VT6, VT6S, , VT14, VT16, VT20, VT22, VT23, PT1M, 2V alloy, PT3V, PT7M.
We offer delivery of titanium materials in small quantities: titanium sheets, titanium bars, titanium tubes, titanium seamless tubes, titanium welded tubes.
On stock we have
- titanium bar over 1000mm
- titanium sheet over 1000 x 2000mm
- titanium seamless tubes, titanium welded tubes with length over 1000mm
from above mentioned materials we can cut billets of titanium bar, titanium sheet, titanium tube.
Titanium sheets, titanium bars, titanium tubes, titanium seamless tubes, titanium welded tubes is quantity under 100kg we can supply by courier mail.
Or we can arrange air delivery of small quantities of titanium sheet, titanium sheets, titanium bar, titanium bars, titanium tube, titanium tubes, titanium seamless tubes, titanium seamless tube, titanium welded tubes, titanium welded tube.
In case we have no ready materials on stock - titanium sheets, titanium bars, titanium tubes, titanium seamless tubes, and titanium welded tubes - as per customers’ specifications, then we can consider taking order for production of minimum lot of titanium materials.
Moreover, we can offer not only titanium materials from our own warehouse: titanium ingots, titanium bars, titanium sheets, titanium wire, titanium tubes, titanium seamless tubes, titanium welded tubes, but also rolled materials from other metals
- stainless bar, stainless sheet, stainless tube, stainless plate
- copper bars, copper sheets, copper, plates, copper tubes
- aluminum bars, aluminum sheets, aluminum plates, aluminum tubes
- bronze bars, bronze sheets, bronze, plates, bronze tubes
- brass bars, brass sheets, brass, plates, brass tubes
- zirconium bars, zirconium sheets, zirconium, plates, zirconium tubes
Industrial companies – chemical plants, petrochemical plants, ship building and ship repair companies often requires small quantities (under 100kg) of titanium materials – titanium bars, titanium sheets, titanium plates, titanium wire, titanium tubes, titanium seamless tubes, titanium welded tubes – as well as rolled materials from other non-ferrous metals. Especially such as stainless bar, stainless sheet, stainless tube, stainless plate.
Our company will consider supplies of stainless sheets, stainless plates, stainless bars, stainless tubes together with available on our stock titanium ingots, titanium ingots, titanium sheet, titanium sheets, titanium bar, titanium bars, titanium tube, titanium tubes, titanium wire.
Small quanity supplies of titanium products - titanium bars, titanium sheets, titanium plates, titanium wire, titanium tubes we will ship by “Autolux” or “Night express” within Ukraine.
We are also interested in long term cooperation with industrial ventures in supplies of small quantities of titanium rolled materials, because we are able to arrange shipment of one titanium bar, or one titanium sheets, one titanium tube, or titanium wire on the territory of Ukraine as well as other CIS and European countries by courier service or multimodal truck transportation.
In order you wish to replenish your stock with titanium bars, titanium sheets, titanium wire, titanium seamless tubes, titanium welded tubes, FIKO Ltd offers constant supplies of small lots of above titanium rolled materials. We can also offer titanium in small quantities from stock in Rotterdam, the Netherlands, where we store titanium bars, titanium sheets and titanium wire.
20. Supply of titanium bar, titanium bars, titanium slab, titanium slabs and manufacturing technique of titanium-forged bars, titanium forgings, titanium-forged bar, titanium rod.
Titanium ingot is applied for manufacture of titanium forged bars, titanium forgings, titanium forged bar.
Depending on diameter of titanium-forged bars, titanium forging, titanium bar it is used different titanium ingots or titanium ingot.
FIKO Electron-beam metallurgical plant can manufacture and supply titanium forged bars, titanium forgings, titanium bar dia. 40-650mm.Diameter of titanium forged bar, titanium forging, titanium bar depends on whether mechanical properties are necessary for bar.
Sometimes titanium forged bars, titanium forgings without mechanical properties are necessary for industrial enterprises. And titanium ingots of minimal diameter are used for such titanium bars that give an opportunity to manufacture competitive titanium forged bar with a low cost value because of absence mechanical properties on titanium bar, since difference is minimal between titanium ingot and titanium forged bar, titanium forging, titanium rod, titanium bar.
Practically there is no operating capacity in Ukraine for manufacturing of titanium sheets and titanium plates and they have to be manufactured on a give-and-take basis from Ukrainian titanium ingots or titanium slabs, but for manufacture of titanium forged bars, titanium forgings, titanium bars there are many operating capacities for melt of titanium ingots into titanium forged bars, titanium forgings, titanium rods, titanium bars and even titanium forged slabs.
Manufacturing technique of titanium-forged bars begins from manufacture of titanium ingots. FIKO Electron-beam metallurgical plant can melt titanium ingots dia. 370, 400, 600, 630, 800, 860mm. For manufacture of competitive diameter of titanium ingot the crystallizer is changed.
Depending on received order and diameter of titanium forged bars titanium forged slabs, titanium forgings, titanium rods, titanium bars FIKO Electron-beam metallurgical plant can melt titanium ingots which are necessary for manufacture of mentioned above titanium bars. We would not describe manufacturing technique of titanium ingots because you can find it on our website.
But for manufacture of any titanium bars including:
a) titanium forged bars
b) titanium forgings
c) titanium rods
d) titanium hot rolled bars
e) titanium bars
it is necessary that titanium ingots pass ultrasonic inspection.
If titanium ingots did not pass ultrasonic test and blisters will be in titanium ingots it brings to output of defective titanium bars or titanium bar.
The second important meaning for manufacture of titanium forged bars, titanium forgings, titanium rods, titanium bars, titanium forged slabs from titanium alloys is quantity of melting of ingots.
Aircraft industry needs double – or triple melting.
After examination of titanium ingot on ultrasonic test, titanium ingot is passed on reforge. Titanium ingots after passing reforge stage turn into titanium-forged bar, titanium forged slabs, titanium forgings, titanium rods, and titanium bars and quality certificates are issued for them.
For that it is taken samples from titanium bars for:
a) Definition of chemical composition of titanium forged bar, titanium forging, titanium rod, titanium bar, titanium-forged slab.
b) Definition of gas content of titanium forged bar, titanium forging, titanium rod, titanium bar, titanium-forged slab.
c) Definition of mechanical properties of titanium forged bar, titanium forging, titanium rod, titanium bar, titanium-forged slab.
The certificate of quality is issued when FIKO Electron-beam metallurgical plant has chemical and gas analyses for titanium bars, titanium forgings, titanium forged bars, titanium forged slab, titanium rods and also it has conclusion about mechanical properties of titanium bars, titanium forgings, titanium forged bars, titanium forged slab, titanium rods.
The certificate of quality is issued for titanium forged bar, titanium bar, titanium forged slab, titanium slab, titanium forging, titanium rod as well as for a lot of for titanium forged bar, titanium bar, titanium forged slab, titanium slab, titanium forging, titanium rod.
Before the certificate will be issued FIKO electron-beam metallurgical plant compares chemical composition of titanium ingot from which titanium bars are manufactured with chemical composition of manufactured titanium forged bars, titanium forged slabs, titanium forgings, titanium rods and titanium bars.
The certificate includes following:
1. casting number and number of titanium ingot from which titanium forged bars, titanium bars, titanium forged slabs, titanium slabs, titanium forgings, titanium rods
2. Chemical composition of titanium forged bars, titanium bars, titanium forged slabs, titanium slabs, titanium forgings, titanium rods
3. Gas analysis of titanium forged bars, titanium bars, titanium forged slabs, titanium slabs, titanium forgings, titanium rods
4. Mechanical properties titanium forged bars, titanium bars, titanium forged slabs, titanium slabs, titanium forgings, titanium rods
5. GOST, OST, TU of manufactured titanium forged bars, titanium bars, titanium forged slabs, titanium slabs, titanium forgings, titanium rods
6. ASTM, DIN, EC of manufactured titanium forged bars, titanium bars, titanium forged slabs, titanium slabs, titanium forgings, titanium rods
We take orders for manufacture of following titanium bars:
a) ATSM Grade-1; ATSM Grade-2; ATSM Ti6Al/4V; ATSM Grade-5; ATSM Grade-9 bars Æ 10-650mm, including titanium forged bars Æ 40mm and more, titanium forged slabs, titanium forgings, titanium rods
b) GOST of titanium bars Æ 10-650mm, including titanium forged bars Æ 40-650mm of following grades VT6, Ti6Al/4V, VT20, VT22, VT23, ОТ4, ОТ4-1, ОТ4-0,VT1-0, VT1-00, VT8, VT9, VT25, VT14, VT15, 2V, 3M, VT16, VT3-1, VT5, VT5-1, PT3V, SP3V, PT7M, PT1M, Grade1, Grade2, Grade5, VT18, VT18U, Alloy 14, Alloy 19, Alloy 27, Alloy 40, Alloy37, AlloyTS6, АТ3, АТ6 according to GOST and ASTM Grade-1; ASTM Grade-2; ASTM Grade-3, Grade-4; Ti6Al/4V; Grade-5.
Titanium bars can pass turning stage in future, but this is another technology about it you can read on our website.
FIKO Electron-beam metallurgical plant can manufacture any titanium forged bars according to ATSM Grade-1; Grade-2; Grade-3, Grade-4; Ti6Al/4V; Grade-5; Grade-9
and GOST:
titanium alloy bars for shipbuilding OST 1 92062-90
titanium forged bars and forgings of PT3V, 3M, 5V, 37,19 OST V.9325-79
titanium alloy closed die forgings OST 190000-70
titanium alloy forgings TU U 14275539-002-94
Titanium and titanium alloy rolled bars GOST 26492-85
Titanium alloy bars OST 1 90266-86
Titanium alloy extruded bars OST 1 92020-82 (instead of 1 92020-72)
Titanium alloy rolled large dimension bars OST 1 90266-86 (instead of OST 1 90266-72)
titanium alloy rolled bars of general purpose TU 1-83-21-79 (instead of TU 1-83-21-72)
Titanium alloy forged bars OST 1 90107-79
Forged bars from alloys VT22 TU 2-92-38-75
Titanium alloy polished and mechanically gauged bars OST 1 90201-75
Hot rolled bars from VT16 OST 1 90202-75
Welded wire from titanium and titanium alloy GOST 27265-87
Welded wire from titanium and titanium alloy OST 1 90015-72
If FIKO Electron-beam metallurgical plant does not manufacture the ingot of such grades so we can take give and take raw materials by your request, titanium ingot or buy titanium ingot by yourself which is needed for manufacture of titanium bars as following:
a) titanium forged bars
b) titanium forgings
c) titanium rods
d) titanium hot rolled bars
e) titanium forged slabs
Titanium bars which have Mpa more then 900 are double –purpose materials so we need to get export licence.
And also from buyer of titanium forged bars, titanium forged slabs, titanium forgings, titanium rods, titanium hot rolled bars and titanium bars we need get the letter of guarantee about no reexport to the third country since there are international organizations of double-purpose material distribution of titanium bars, titanium forgings, titanium rods which can be used in nuclear energy technology and titanium bars Æ 75mm belong to them if they have 900 Mpa and more.
Taking into account that it is going on the fight for markets first of all more developed countries such as the USA, EU control supply of titanium bars of Ukraine and Commonwealth of Independent States to Asia, Africa which can buy titanium bars, titanium forged bars, titanium forged slabs, titanium forgings, titanium rods, titanium hot rolled bars Æ 75mm and more, Mpa 900 and more.
Moreover we take orders for manufacture on a give- and- take basis of following non-ferrous metal bars: copper bars, bronze alloy bars, aluminium ingots, aluminium bars, non-corrosive bars, and zirconium bars.
For manufacture of copper bars, bronze alloy bars, aluminium bars, aluminium bar, non-corrosive bars, and zirconium bars, non-corrosive bar. We take ingots as give and take raw materials from following metals:
- copper ingot
- brass ingot
- bronze ingot
- zirconium ingot
- stainless steel ingot
- tungsten ingot
- lead ingot
or we take and buy non-liquid non-ferrous metals bars as following:
- copper bars
- stainless steel bars
- brass bars
- bronze bars
- zirconium bars.
21. Supply of titanium bars, titanium tubes and titanium rolled materials under agent agreement.
We offer 3 variants of cooperation under agent agreement:
1. We sign agent agreement with your company according to which we supply titanium materials to the customer:
- titanium bars, titanium hot rolled bars, titanium turned bars, titanium forged bars;
- titanium sheets and plates
- titanium wire
- titanium tubes, titanium seamless tubes, titanium welded tubes;
- titanium coil, titanium hot coil, titanium cold coil
and according to agent agreement we will remit your commissions after settlement of accounts with customer. Also we will provide a special yearly exclusive right to get commissions from supplies of titanium bars, titanium hot rolled bars, titanium turned bars, titanium forged bars; titanium sheets and plates; titanium wire; titanium tubes, titanium seamless tubes, titanium welded tubes; titanium coil, titanium hot coil, titanium cold coil to this customer.
2. FIKO Ltd signs general contract for supply of titanium heat exchangers or another titanium equipment produced from titanium ingots, titanium slabs or from titanium bars and other rolled materials including titanium hot coil and titanium cold coil, titanium tubes (seamless titanium tubes or welded titanium tubes), titanium wire, made out of our titanium ingots or titanium slabs. And your company is getting commissions from this supply for providing the customer and assisting the deal.
3. According agent agreement we supply directly to you following titanium materials at release price:
- titanium bars, titanium hot rolled bars, titanium turned bars, titanium forged bars;
- titanium sheets and plates
- titanium wire
- titanium tubes, titanium seamless tubes, titanium welded tubes;
- titanium coil, titanium hot coil, titanium cold coil
and we will pay your commissions instead of customer and also we will provide a special yearly exclusive right to get commissions from supplies of titanium bars, titanium hot rolled bars, titanium turned bars, titanium forged bars; titanium sheets and plates; titanium wire; titanium tubes, titanium seamless tubes, titanium welded tubes; titanium coil, titanium hot coil, titanium cold coil to this customer
FIKO Ltd will consider concluding agreements with agents for export of titanium ingots, titanium slabs or titanium bars and other rolled materials including titanium hot coil and titanium cold coil, titanium tubes (seamless titanium tubes or welded titanium tubes), titanium wire, made out of our titanium ingots or titanium slabs, under following conditions:
- we sign agent agreement as soon as your company furnish the first official order for titanium materials;
- in agent agreement the whole range of titanium products offered by us should be indicated (titanium ingots, titanium slabs, titanium bars, titanium hot rolled bars, titanium turned bars, titanium forged bars; titanium sheets and plates; titanium wire; titanium tubes, titanium seamless tubes, titanium welded tubes; titanium coil, titanium hot coil, titanium cold coil)
- the prices indicated in agent agreement should be up to 6 month valid;
- we will provide sample quality certificates for your or your customer’s consideration for offered materials: titanium bars, titanium hot rolled bars, titanium turned bars, titanium forged bars; titanium sheets and plates; titanium wire; titanium tubes, titanium seamless tubes, titanium welded tubes; titanium coil, titanium hot coil, titanium cold coil, titanium ingots, titanium slabs;
- after contract is signed with customer and materials shipped we issue original certificate of quality for supplied materials: titanium sheets and titanium plates, titanium stubs seamless and welded, titanium wire, titanium rolled bars, titanium forged bars, titanium turned bars, titanium cold coils, titanium hot coils, titanium ingots, titanium slabs;
- after the final accounts with buyer are settled we remit your commissions within 7 bank working days for release titanium production: titanium bars, titanium hot rolled bars, titanium turned bars, titanium forged bars; titanium sheets and plates; titanium wire; titanium tubes, titanium seamless tubes, titanium welded tubes; titanium coil, titanium hot coil, titanium cold coil, titanium ingots, titanium slabs;
- in order we could make payment for agent’s services the agent should provide the following documents in original: both sides signed agent agreement, invoice from agent for his services, statement of works or acceptance report for supplied materials (titanium sheets and titanium plates, titanium stubs seamless and welded, titanium wire, titanium rolled bars, titanium forged bars, titanium turned bars, titanium cold coils, titanium hot coils, titanium ingots, titanium slabs)
Besides export of titanium ingots, titanium slabs and rolled materials FIKO Ltd is also interested
- in cooperation on producing of titanium hot coils and titanium cold coils from titanium ingots and titanium slabs in Japan or Italy;
- in joint production of titanium heat exchangers and other equipment from titanium ingots and rolled materials made from them, such as: titanium bars, titanium sheets, titanium cold coils and titanium hot coils – for chemical, petrochemical, building enterprises of Ukraine and CIS countries.
For manufacture of titanium heat exchangers we can offer supply of titanium bars, titanium sheets, titanium wire, titanium seamless tubes.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIKO Ltd supplies titanium rolled materials for medical instruments and implants production. The standard materials for this application are titanium bars and titanium wire, which are produced by means of forging and rolling of titanium ingots and titanium slabs into titanium bars, titanium sheets, titanium tubes. The following grades are used: ASTM C.P. Grade1, Grade2, also Grade5, Ti6AL-4V, Ti6AL-4V ELI, GOST VT1-0, VT1-00, VT3-1, VT6, VT6S, VT5, VT8, VT9, OT4, OT4-1, OT4-0, BT14, VT15, VT16, VT20, VT22, VT23, PT1M, PT7M, PT3V, alloy 14, alloy 19, alloy 27, alloy 40, alloy TC6, AT3, AT6.
The most applicable grades of titanium for medical instruments are titanium alloys VT6, VT6S or according to ASTM Grade-5 and Ti6Al-4V. Titanium bars, titanium wire, titanium sheets, titanium tubes of such grades are being supplied to the companies which manufacture medical instruments using titanium bars, titanium wire, titanium sheets, and titanium tubes in their production process.
Titanium bars, which are used in medical industry for production of joint-spins are supplied in grades ASTM C.P. Grade1, Grade2, also Grade5, Ti6AL-4V, Ti6AL-4V ELI, GOST VT1-0, VT1-00, VT3-1, VT6, VT6S, VT5, VT8, VT9, OT4, OT4-1, OT4-0, BT14, VT15, VT16, VT20, VT22, VT23, PT1M, PT7M, PT3V, alloy 14, alloy 19, alloy 27, alloy 40, alloy TC6, AT3, AT6
Alloys Grade1, Grade2, also Grade5, Ti6AL-4V, Ti6AL-4V ELI, GOST VT1-0, VT1-00, VT3-1, VT6, VT6S which are the material for surgical instruments are being distinguished for material strength and long-life service.
We supply titanium bars, titanium wire, titanium sheets in grades VT1-0, VT1-00, VT3-1, VT6, VT6S, VT5, VT8, VT9, OT4, OT4-1, OT4-0, BT14, VT15, VT16, VT20, VT22, VT23, PT1M, PT7M, PT3V, Grade1, Grade2, also Grade5, Ti6AL-4V, Ti6AL-4V ELI for medical instruments manufacture.
Titanium materials for medical application
The first stage is titanium ingots (titanium ingot) production – VT1-0, VT6, VT16, VT6C, Ti6Al-4V, Grade 5.
Titanium ingot (titanium ingots) is melted from titanium sponge grade TG90, TG100, TG 110, TG120, TG130, TG150, TG TV. Sponge TG TV and TG150 is mostly used for FeTi production, while for titanium ingots the sponge of grades TG90, TG100, TG 110, TG120, TG130 is needed.
The only manufacturers of titanium sponge in CIS countries are Zaporozhje Titanium Magnesium Plant, Ust’-Kamenogorsky Titanium Magnesium Plant, Bereznjakovsky Titanium Magnesium Plant.
Titanium sponge is being initially pressed into titanium expendable boxes, and after drying is fed to melting chamber of electron-beam facility.
In melting titanium ingot ASTM Grade 2 and VT1-0 not only titanium sponge, but also titanium cuttings (turnings) are used, that should be mixed with titanium sponge in a certain ratio. Titanium scrap – pieces of titanium plates or titanium sheets VT1-0, Grade 1, Grade 2 is also applicable in this case.
After melting titanium ingots undergo mechanical treatment – the surface of titanium ingot is being turned (machined) – and the turnings and cut off pieces that are left after mechanical treatment of titanium ingots are repeatedly used as a raw material for ingots melting. Then the ultrasonic testing is being carried out.
The melting of Grade 5, Ti6Al-4V, VT6, VT6S, VT16 titanium ingots is more complicated process, since these grades are titanium alloys.
For production of titanium ingots VT6, VT6S, VT16 the following grades of titanium sponge is used: TG90, TG100, TG 110, TG120, TG130 as well as titanium scrap and titanium cuttings VT6, VT6S, VT16.
Moreover, for melting of titanium ingots Grade 5, Ti6Al-4V, VT6, VT6S the ligature may be used (the booster alloys, used for alloying elements supplement into liquid metal).
Electron-beam method, which we apply in titanium ingots production, allows to get high quality material in one melting.
After that titanium ingots Grade 5, Ti6Al-4V, VT6, VT6S can be further processed into titanium rolled materials – titanium turned bars, titanium forged bars, titanium sheets, titanium coil Grade 5, Ti6Al-4V, VT6, VT6S.
Click enlarge Image
