E-Glass direct roving

Quick Detail

Package & Delivery Lead Time

Detailed Description

Key Technical Data 型号 Specs 技术指标 Tech Data 线密度 TEX LOl (%) MOl (%) 适用树脂 Compatible Resin 适用工艺 Applicable Process y601 2400 4800 1.10-1.30 ≤0.10 UP VE 结构型 Structure type y602 2400 4800 1.10-1.30 ≤0.10 UP VE 结构型 Structure type y606 2400 4800 1.00-1.40 ≤0.10 UP VE 结构型和表面型 Structure and Surface type 包装方法 Packing Style 合股无捻粗纱每卷纱重17-19公斤，单卷纱使用PVC材质热塑袋首先进行热定型，以4 * 4方式摆放一层，堆起为64卷大托，堆起3层为48卷小托。可根据客户需求整托内采用打结或空气接头方式将多卷纱进行首尾相连，整托采用瓦楞纸板天地盒盖加腰身进行包装，使用多道打包袋与托盘固定。还可以使用缠绕多层粘性拉伸膜方式对整托进行包装。还可以根据客户需求将单卷纱装入相应大小的纸箱进行包装。 Each bobbin is 15-17kgs and wrapped by a PVC shrink bag.If required,each bobbin could be packed into a suitable cardboard box. Each pallet containers 3 or 4 layers,and each layer contains 16 bobbins(4*4).Each 20ft container normally loads 10 small pallets (3 layers) and 10 bigs pallets (4layers).The bobbins in the pallet could be singly piled or be connected as start to end by air spliced or by manual knots; The whole pallets of bobbins are wrapped with cardboard boxes,packed on the pallet with packing straps and shrink film or with multi-layers of shrink film only. 贮存 Storage 贮存在干燥、凉爽处，建议温度在15-35，相对湿度在30%-70%条件下存放。如若不用请勿打开包装，以免受潮。 This product should be stocked in dry and cool places.The best condition is with temperature between 15 and 35,with a relative humidity between 30%-70%.Please keep the product in its original packing before use,avoiding moisture.

Basic Company Information

Hebei Yuniu Fiberglass Manufacturing Co., LTD

Company Advantage

Detail Company Introduction