Heat Shrinkable Tape

본문 바로가기


Home > Product > Heat Shrinkable Tape
Product
Heat Shrinkable Tape
Posting date : Mar 31, 2012
Membership
Free Member Scince Mar 31, 2012
Keyword :
Category
Contact
          0 likes     
Product Detail
Company Info
 
Quick Detail
Place of Origin
HS-CODE
35-
Package & Delivery Lead Time
Detailed Description
Heat Shrinkable Tape is a hand wrapped heat shrinkable tape designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations.. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces. The Polyethylene Heat shrinkable Tape needs no primer nor patch closure and reduces application time and labour costs. Ⅱ Structure The specification of the tape consists of three layers, Adhesive: butyl rubber based hot melt adhesive Film backing: Radiation crosslinked polyethylene Interleaf:Antiadhesive Film Treated with Silicone Ⅲ Features After heating, formed corrosion protection seal Strong backing provides outstanding waterproofing effect High chemical resistance. resists impact, abrasion and ultraviolet light. Excellent resistance against cathodic disbondment, dielectric breakdown. Simple Application Ⅳ Physical Properties • Product Data Sheet Total Thickness:40mil, 50 mil,60 mil ,65 mils. • Width:50,100,150,300,400,500,800 mm • Length: 10 m • Tensile Strength:35 N/cm • Elongation:400% • Adhesion Strength to pipe:30 N/cm • Application temperature: -10 -60 ℃ • Temperature resistance:-50 ℃ - 80℃ • Shelf Life: 12 months Ⅴ Application No Special skills, equipments, patch closure nor primer are needed. Its superior flexibility provides easy and reliable application for irregular configurations of fittings, bends and elbows and small diameter of straight pipes. Wrap spirally the tape over foreign matters-free and preheated surface, beginning at least 25~50mm (1~2 ) onto pipe coating. Wrap the tape with enough tension to obtain conformability and with minimum 50% of overlapping, while removing the release liner. Warm the end part of the tape and press down firmly. Using a torch, start at the edge of the tape and heat circumferentially around the coated pipe. Finish off by heating over the entire tape vertically to ensure a uniform adhesion and by using a roller or gloved hands to remove wrinkle and air.

ECROBOT CO., Ltd, Business Registration Number : 220-88-71747, CEO J.W.Park, TEL : +82-2-552-7676, E-mail : E-mail : Contact us
Address : (Hwanghwa B/D 11F, Yeoksam-dong)320, Gangnam-daero, Gangnam-gu, Seoul, South Korea
About Us Privacy Policy Terms of use Copyright © 2000-2024 ECROBOT.COM. All rights reserved.
Top