Quick Detail
Place of Origin
HS-CODE
35-
Package & Delivery Lead Time
Detailed Description
Multi-purpose polyurethane adhesive for automobile
PU8630
Detailed Product Description
PU8630 is one component polyurethane adhesive used in variety bonding and sealing
Features
1. Bond very well with surface of variety substrates such as all kinds of metal, lumber, glass, polyurethane, epoxy, resign, PU and coating material, etc. Also with good cohesive force and durable elastic bonding and sealing performance
2. One component adhesive with fabulous thixotropy, it's convenient to apply with rapid curing
3. Excellent water, weather and aging resistance
4. Excellent wear-resisting property
5. Paintable and polishable
6. No sag or flow phenomena within 30mm perpends
Usage
1. Specially used for windshield and side glass
2. Also use for glass steel and plastic accessories (car roof, side body and car front)
3. Very popular in repair market
Data Table
Model Number
PU 8630
Main Raw Material
Polyurethane
Color
Black
paste
Density
1.35±0.05Gr/cc
Sagging
0mm
Volatile content
≤4%
Extrudability
≥80ml/min
Touch dry time
10-30Min
Curing speed
3-5Mm/24hrs
Shore A-hardness
61±3ShoreA
Tensile strength
≥4N/mm2
Elongation at break
≥350%
Application temperature
5~35°C
Note:
a.All data above ware tested under standardized condition.
b.All data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
c.Storage condition has a direct impact to the products' shelf life, Please refer to the instruction for special items' storing.
Operation
Clean before operation
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
Direction of operation
Tool:Manual or pneumatic plunger caulking gun
For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately
Package and Storage
Package Storage
310ml cartridge, 20pcs/carton Keep in cool and ventilative place
400ml/600ml sausage, 20pcs/carton Temperature≤25°C, humidity≤50%RH
Color: Black Shelf life: 9 months
Safety Operation Material
MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from Sepuna or other distributors, or call +86-400-882-1323.
Product Warranty
All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. Sepuna don't make assurance of any other applications outside the specification until Sepuna supply a special written guarantee. Sepuna is only responsible to replace or refund if this product is defective within the warranty period stated above. Sepuna makes it clear that will not be liable of any accidents.
Click enlarge Image
