Quick Detail
Place of Origin
HS-CODE
S02-
Package & Delivery Lead Time
Detailed Description
Sand AAC Production Line Process
1, Jaw crusher is used to primary crush for raw material, and then we use ball mill to make raw material into powder.
2, Raw material is reserved in storehouse, and mix them in a certain proportion.
3, The raw material is measured by electronic balance. Pour them to the mould and mix evenly.
4, Quite to it in a certain temperate until the base body reach certain hardness.
5, Use the sling to carry mould and base body to cutting machine, the sling turn the mould 90 degree in the air, and one side of the mould become the bottom plate to support the base body.
6, Put the base body to hardening car and open mould, then the base body was cutted in six-side. First vertical level and then horizontally cutting.
7, Use the semi-product sling to carry the block to autoclave, and after steaming under high pressure and temperate for 8 hours, the product can be carried out.
the sand block's ingredient of raw materials
Sand 55-65%
cement 10-20
lime 20-30%
gypsum 2-3%
Aluminum powder paste 8
Water & material rate 0.65-0.75
Casting temperature 35-38° C
Aluminum mixing time 30-40s
Click enlarge Image
