Quick Detail
Place of Origin
HS-CODE
87-
Package & Delivery Lead Time
Detailed Description
i. Menu
Tool: you can choose language here, support "English" and Chinese Simplified Restart software to apply your settings.
File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.Help: Device update. You can get your device and dongle id version and update it.
ii. Protocal type:
Now BMT support there type of protocol: KWP CAN BUS 100Kbps, KWP CAN BUS 500Kbps, KWP 2000. "Auto Detect " function can help you to choose the right protocol. After choose protocol okay, then press Connect. If connected success. All CAS info will display in CAS Identification. Include CAS number, VIN, production date, etc. see the picture follows:
iii. EEPROM Function: Read EEPROM,Write EEPROMSave FileLoad File
1 You should backup the CAS EEPROM before prepare dealer key. After succeed read EEPROM, please save it as back file. This step is very important.
2 Now can't read the whole EEPROM for cas3 system. But the main section is contained. It should be saved. When you read CAS EEPROM,
3.Write EEPROM function is only support CAS1, CAS2 system. Doesn't support write to cas3 system.
iv. Odometer: Support read and change KM stored in CAS system. Don't support to change KM in instrument. If you want to change the KM
display in instrument. You should change KM in CAS system first. Then modify the KM in instrument manually.
v. Synchronization Codes:
1 CAS3 code-DME CAS3code-EGS: Read and write DME and EGS code stored in CAS3 system.
2 Synchronize DME and CAS this function will be useful while prepare dealer key or any other operation which cause can't start the engine.
3 Synchronize CAS and ELV this function can help clear wheel errors
vi. Key Learn
Function introduction:
Get Key Info: With this function you can get the key cutting, remote frequency, and key data.
Save Key Info: Save the read key info.
Load Key Info: Load the saved key info. To see the key data and prepare for write key info.
Write Key Info: Write the loaded key info into CAS system.
Make Dealer Key: You can prepare dealer key after you get key info successfully. Also you should choose the key position.
Add key: Add the new dealer key into CAS system. Some CAS system needs this step to start the engine.
Enable Key: Insert a working key, choose the key position which you want to disable. The key position can't be same with the key in ignition.
Disable Key: Insert a working key, choose the key position which you want to enable. The key position cant be same with the key in ignition.
Clear DTC: Before prepare dealer key and after it you can use this function to clear DTC.
Clear Shadow:Before prepare dealer key and after it you can use this function to clear Shadow.
vii. File Make Key
1 Choose CAS or EWS type. It will tips you
2.Load the choose EEPROM file you will get the make dealer key window
3 Choose key position and press "Make Dealer Key" button. Flow the given tips to prepare dealer key. After succeed you can save the new EEPROM dump file.
For EWS1, EWS2, EWS3, EWS4, CAS1, CAS2, CAS3 type the prepared dealer key can start the engine directly.
For some CA3+ type you need to write back the new dump file into car
4. CAS3 encrypt data, only OBDII prepare make key is support for CAS3 encrypt data
viii. Device Update
Open this window after connect to internet. You can see the latest software version, firmware version, dongle version. You can go to our website for further information. After succeeded update device firmware, must reconnect the hardware to computer
"Device not connected"Error
Information: Hardware not connected to PC with USB port.
Solution: Plug device to USB.
0 likes
Click enlarge Image
